| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| boneIO black_debian_images ships with a Mosquitto MQTT broker that uses the same default credentials on all devices. These credentials are publicly documented on github, and there is no indication in the instructions to change them. A remote attacker can use them to gain full read and write access to the broker, allowing control of connected relays, blinds, and gates, and injection of fake entities into a linked Home Assistant installation.
This issue was fixed in version 1.6.0 of the image: MQTT passwords are generated per device at first boot. Devices upgraded from earlier versions keep their existing broker credentials; from boneio 1.6.0 the web panel reports credentials that are still the published defaults, and the owner has to change them. |
| Zephyr's OpenThread integration defined CONFIG_OPENTHREAD_JOINER_PSKD with default "J01NME" in modules/openthread/Kconfig.thread (previously subsys/net/l2/openthread/Kconfig, then subsys/net/l2/openthread/Kconfig.thread). J01NME is the example Joining Device Credential used throughout the public OpenThread and Thread commissioning documentation, including Zephyr's own samples/net/sockets/echo_client/README.rst, so it is not a secret. A firmware image built with CONFIG_OPENTHREAD_JOINER_AUTOSTART=y that never overrode the PSKd therefore shipped with a publicly known joining credential compiled in, with no build-time or run-time warning.
The PSKd is the only value that authenticates Thread commissioning: joiner and commissioner run a DTLS-PSK handshake keyed on it, after which the commissioner supplies the full operational dataset. In ot_configure_instance() (modules/openthread/openthread.c), a device with no stored dataset calls otJoinerStart() with the configured PSKd, and ot_joiner_start_handler() calls otThreadSetEnabled() on success. An unauthenticated attacker within 802.15.4 radio range of an uncommissioned device (factory-fresh, after a factory reset, or after a settings erase) can run any stock Thread commissioner registered with J01NME, complete the handshake, and hand the device an attacker-controlled operational dataset.
The device then joins and enables Thread on the attacker's mesh. The attacker becomes its router, seeing, dropping, injecting and spoofing all of the device's IPv6 traffic and impersonating the peers the application expects, while the device is cut off from the network it was meant to join and stays mis-provisioned until it is reset. Only application-layer security with independently provisioned credentials survives. Exposure is limited to builds that enable joiner autostart and leave the PSKd unset; the option is not enabled by default and no in-tree sample uses the vulnerable combination.
The fix removes the default from CONFIG_OPENTHREAD_JOINER_PSKD and adds a BUILD_ASSERT() in modules/openthread/openthread.c, active only under CONFIG_OPENTHREAD_JOINER_AUTOSTART, that fails the build unless a 6-to-32-character PSKd is configured. Products should provision a per-device PSKd from factory data and call otJoinerStart() from the application rather than relying on a credential compiled identically into every unit. |
| The Goobi viewer is a web application that allows digitised material to be displayed in a web browser. Prior to version 26.05, Configuration.getWebApiToken returns the empty string when webapi.authorization.token is not configured. AuthorizationFilter compares the supplied token against this default without first checking that the configured token is non-empty. A request to any @AuthorizationBinding-protected endpoint with an empty ?token= value is therefore accepted. This issue has been patched in version 26.05. |
| DataBuff ai-apm-web through 0.1.10 contains a hard-coded default credentials vulnerability that allows unauthenticated attackers to gain administrator access using the built-in admin/Databuff@123 account. Attackers can POST these credentials to /webapi/api/v1/auth/login to obtain an administrator token and access all protected /webapi routes. |
| DB-GPT through 0.8.2 contains a hardcoded credentials vulnerability in its default docker-compose.yml that sets a static MYSQL_ROOT_PASSWORD and publishes port 3306 on all interfaces. Attackers reaching port 3306 or the shared dbgptnet network can authenticate as root@% to gain full database access including FILE and SUPER privileges. |
| FlyCms through commit edfdf724 contains a default credentials vulnerability that allows unauthenticated remote attackers to gain super administrator access via the flycms account with password admin123. Attackers can log in through POST /api/auth/login, solving only the image captcha, to obtain full control of site content, users and configuration. |
| Vanus 0.8.0 through 0.9.0 contains a default credentials vulnerability that allows unauthenticated remote attackers to gain cluster-admin access by using the hardcoded admin token. Attackers can send the fixed Bearer token to the gateway gRPC proxy port to manage namespaces, eventbuses, users, tokens, and role bindings, and read or publish events. |
| JuggleIM im-server through 1.8.16 ships default administrator credentials admin/123456 that allow unauthenticated remote attackers to access the admin console on port 8090. Attackers can log in as administrator, even after account deletion since CheckLogin recreates it, to control tenant applications and app secrets. |
| Astron Agent is an agentic workflow platform for building and running AI agents. Prior to 1.1.2, the default workflow code-node path through /console-api/workflow/code/run and /workflow/v1/run selects LocalExecutor in core/workflow/engine/nodes/code/code_node.py when CODE_EXEC_TYPE is not explicitly changed. LocalExecutor supplies complete Python builtins to dynamic code execution without the documented sandbox restrictions. An authenticated low-privilege tenant can execute code as root in the core-workflow container and use shared service and database credentials to bypass application-level tenant checks, read or modify other tenants' data, and disrupt shared services. This issue is fixed in version 1.1.2. |
| A security vulnerability has been detected in PRVTPRO Amnezia-Web-Panel up to 1.6.2/1.7.2. This affects an unknown part of the file app.py of the component Backup Download. The manipulation leads to use of default credentials. The attack can be initiated remotely. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| Perforce P4 Search container images prior to 2026.4.2 reset the service authentication token to a publicly documented default value. An unauthenticated attacker with network access can obtain the highest application privilege, potentially leading to arbitrary code execution and compromise of the connected P4 Server. |
| An example environment-configuration file ships with a fixed, publicly-known secret value used to sign authentication cookies for a bundled packet-analysis component. A deployment that copies this example file into active configuration without running the setup routine that regenerates the value will use the known default, allowing an attacker aware of the default to forge valid authentication cookies for that component. |
| An example environment-configuration file for a bundled inventory-management component ships with a fixed, publicly-known administrative password. A deployment that copies this example file into active configuration without running the setup routine that regenerates credentials will expose that component's administrative interface to anyone aware of the default value. |
| X-SpringBoot through 6.0 ships with a hardcoded static master login verification code 172839 enabled by default in the database seed. Unauthenticated attackers can authenticate as any user by submitting the public master code to the emailOrMobileLogin endpoint with a known email or mobile number. |
| Use of default credentials vulnerability in Innotim Software, Telecommunications and Consultancy Trade Ltd. Co. Logsign SIEM allows Try Common or Default Usernames and Passwords.
This issue affects Logsign SIEM: from 6.4.101 before 6.4.117. |
| A flaw has been found in ningzichun student-management-system up to 98760f5711cf6dc8b4adca53a9e207ca49b02ebf. Affected by this vulnerability is an unknown functionality of the file example_lite.sql. Executing a manipulation can lead to use of default credentials. It is possible to launch the attack remotely. The exploit has been published and may be used. The project was informed of the problem early through an issue report but has not responded yet. |
| A vulnerability in the Eclipse Vert.x toolkit causes a memory leak in TCP servers configured with TLS and SNI support. When processing an unknown SNI server name assigned the default certificate instead of a mapped certificate, the SSL context is erroneously cached in the server name map, leading to memory exhaustion. This flaw allows attackers to send TLS client hello messages with fake server names, triggering a JVM out-of-memory error. |
| novel-plus through 5.3.3 contains an insecure default cache-management password in the CacheController.refreshCache endpoint that allows anonymous attackers to invalidate portal caches by supplying the hardcoded default value in the URL path. Attackers can trigger unauthorized cache invalidation by accessing the cache/refresh endpoint with the known default password, forcing unnecessary database queries to repopulate the cache. |
| IBM ContextForge MCP Gateway 1.0.0 through 1.0.7 could allow a remote attacker to gain administrative access due to the use of default credentials. |
| A vulnerability was identified in lenve vhr 1.0-SNAPSHOT. Affected by this issue is some unknown functionality of the file vhr.sql. The manipulation leads to use of default credentials. Remote exploitation of the attack is possible. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way. |
