| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath12k: fix node corruption in ar->arvifs list
In current WLAN recovery code flow, ath12k_core_halt() only reinitializes
the "arvifs" list head. This will cause the list node immediately following
the list head to become an invalid list node. Because the prev of that node
still points to the list head "arvifs", but the next of the list head
"arvifs" no longer points to that list node.
When a WLAN recovery occurs during the execution of a vif removal, and it
happens before the spin_lock_bh(&ar->data_lock) in
ath12k_mac_vdev_delete(), list_del() will detect the previously mentioned
situation, thereby triggering a kernel panic.
The fix is to remove and reinitialize all vif list nodes from the list head
"arvifs" during WLAN halt. The reinitialization is to make the list nodes
valid, ensuring that the list_del() in ath12k_mac_vdev_delete() can execute
normally.
Call trace:
__list_del_entry_valid_or_report+0xd4/0x100 (P)
ath12k_mac_remove_link_interface.isra.0+0xf8/0x2e4 [ath12k]
ath12k_scan_vdev_clean_work+0x40/0x164 [ath12k]
cfg80211_wiphy_work+0xfc/0x100
process_one_work+0x164/0x2d0
worker_thread+0x254/0x380
kthread+0xfc/0x100
ret_from_fork+0x10/0x20
The change is mostly copied from the ath11k patch:
https://lore.kernel.org/all/20250320053145.3445187-1-quic_stonez@quicinc.com/
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1 |
| In the Linux kernel, the following vulnerability has been resolved:
__legitimize_mnt(): check for MNT_SYNC_UMOUNT should be under mount_lock
... or we risk stealing final mntput from sync umount - raising mnt_count
after umount(2) has verified that victim is not busy, but before it
has set MNT_SYNC_UMOUNT; in that case __legitimize_mnt() doesn't see
that it's safe to quietly undo mnt_count increment and leaves dropping
the reference to caller, where it'll be a full-blown mntput().
Check under mount_lock is needed; leaving the current one done before
taking that makes no sense - it's nowhere near common enough to bother
with. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: ipset: fix region locking in hash types
Region locking introduced in v5.6-rc4 contained three macros to handle
the region locks: ahash_bucket_start(), ahash_bucket_end() which gave
back the start and end hash bucket values belonging to a given region
lock and ahash_region() which should give back the region lock belonging
to a given hash bucket. The latter was incorrect which can lead to a
race condition between the garbage collector and adding new elements
when a hash type of set is defined with timeouts. |
| In the Linux kernel, the following vulnerability has been resolved:
Revert "smb: client: fix TCP timers deadlock after rmmod"
This reverts commit e9f2517a3e18a54a3943c098d2226b245d488801.
Commit e9f2517a3e18 ("smb: client: fix TCP timers deadlock after
rmmod") is intended to fix a null-ptr-deref in LOCKDEP, which is
mentioned as CVE-2024-54680, but is actually did not fix anything;
The issue can be reproduced on top of it. [0]
Also, it reverted the change by commit ef7134c7fc48 ("smb: client:
Fix use-after-free of network namespace.") and introduced a real
issue by reviving the kernel TCP socket.
When a reconnect happens for a CIFS connection, the socket state
transitions to FIN_WAIT_1. Then, inet_csk_clear_xmit_timers_sync()
in tcp_close() stops all timers for the socket.
If an incoming FIN packet is lost, the socket will stay at FIN_WAIT_1
forever, and such sockets could be leaked up to net.ipv4.tcp_max_orphans.
Usually, FIN can be retransmitted by the peer, but if the peer aborts
the connection, the issue comes into reality.
I warned about this privately by pointing out the exact report [1],
but the bogus fix was finally merged.
So, we should not stop the timers to finally kill the connection on
our side in that case, meaning we must not use a kernel socket for
TCP whose sk->sk_net_refcnt is 0.
The kernel socket does not have a reference to its netns to make it
possible to tear down netns without cleaning up every resource in it.
For example, tunnel devices use a UDP socket internally, but we can
destroy netns without removing such devices and let it complete
during exit. Otherwise, netns would be leaked when the last application
died.
However, this is problematic for TCP sockets because TCP has timers to
close the connection gracefully even after the socket is close()d. The
lifetime of the socket and its netns is different from the lifetime of
the underlying connection.
If the socket user does not maintain the netns lifetime, the timer could
be fired after the socket is close()d and its netns is freed up, resulting
in use-after-free.
Actually, we have seen so many similar issues and converted such sockets
to have a reference to netns.
That's why I converted the CIFS client socket to have a reference to
netns (sk->sk_net_refcnt == 1), which is somehow mentioned as out-of-scope
of CIFS and technically wrong in e9f2517a3e18, but **is in-scope and right
fix**.
Regarding the LOCKDEP issue, we can prevent the module unload by
bumping the module refcount when switching the LOCKDDEP key in
sock_lock_init_class_and_name(). [2]
For a while, let's revert the bogus fix.
Note that now we can use sk_net_refcnt_upgrade() for the socket
conversion, but I'll do so later separately to make backport easy. |
| In the Linux kernel, the following vulnerability has been resolved:
acpi: nfit: fix narrowing conversion in acpi_nfit_ctl
Syzkaller has reported a warning in to_nfit_bus_uuid(): "only secondary
bus families can be translated". This warning is emited if the argument
is equal to NVDIMM_BUS_FAMILY_NFIT == 0. Function acpi_nfit_ctl() first
verifies that a user-provided value call_pkg->nd_family of type u64 is
not equal to 0. Then the value is converted to int, and only after that
is compared to NVDIMM_BUS_FAMILY_MAX. This can lead to passing an invalid
argument to acpi_nfit_ctl(), if call_pkg->nd_family is non-zero, while
the lower 32 bits are zero.
Furthermore, it is best to return EINVAL immediately upon seeing the
invalid user input. The WARNING is insufficient to prevent further
undefined behavior based on other invalid user input.
All checks of the input value should be applied to the original variable
call_pkg->nd_family.
[iweiny: update commit message] |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe/hmm: Don't dereference struct page pointers without notifier lock
The pnfs that we obtain from hmm_range_fault() point to pages that
we don't have a reference on, and the guarantee that they are still
in the cpu page-tables is that the notifier lock must be held and the
notifier seqno is still valid.
So while building the sg table and marking the pages accesses / dirty
we need to hold this lock with a validated seqno.
However, the lock is reclaim tainted which makes
sg_alloc_table_from_pages_segment() unusable, since it internally
allocates memory.
Instead build the sg-table manually. For the non-iommu case
this might lead to fewer coalesces, but if that's a problem it can
be fixed up later in the resource cursor code. For the iommu case,
the whole sg-table may still be coalesced to a single contigous
device va region.
This avoids marking pages that we don't own dirty and accessed, and
it also avoid dereferencing struct pages that we don't own.
v2:
- Use assert to check whether hmm pfns are valid (Matthew Auld)
- Take into account that large pages may cross range boundaries
(Matthew Auld)
v3:
- Don't unnecessarily check for a non-freed sg-table. (Matthew Auld)
- Add a missing up_read() in an error path. (Matthew Auld)
(cherry picked from commit ea3e66d280ce2576664a862693d1da8fd324c317) |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: mvm: clean up ROC on failure
If the firmware fails to start the session protection, then we
do call iwl_mvm_roc_finished() here, but that won't do anything
at all because IWL_MVM_STATUS_ROC_P2P_RUNNING was never set.
Set IWL_MVM_STATUS_ROC_P2P_RUNNING in the failure/stop path.
If it started successfully before, it's already set, so that
doesn't matter, and if it didn't start it needs to be set to
clean up.
Not doing so will lead to a WARN_ON() later on a fresh remain-
on-channel, since the link is already active when activated as
it was never deactivated. |
| In the Linux kernel, the following vulnerability has been resolved:
idpf: fix checksums set in idpf_rx_rsc()
idpf_rx_rsc() uses skb_transport_offset(skb) while the transport header
is not set yet.
This triggers the following warning for CONFIG_DEBUG_NET=y builds.
DEBUG_NET_WARN_ON_ONCE(!skb_transport_header_was_set(skb))
[ 69.261620] WARNING: CPU: 7 PID: 0 at ./include/linux/skbuff.h:3020 idpf_vport_splitq_napi_poll (include/linux/skbuff.h:3020) idpf
[ 69.261629] Modules linked in: vfat fat dummy bridge intel_uncore_frequency_tpmi intel_uncore_frequency_common intel_vsec_tpmi idpf intel_vsec cdc_ncm cdc_eem cdc_ether usbnet mii xhci_pci xhci_hcd ehci_pci ehci_hcd libeth
[ 69.261644] CPU: 7 UID: 0 PID: 0 Comm: swapper/7 Tainted: G S W 6.14.0-smp-DEV #1697
[ 69.261648] Tainted: [S]=CPU_OUT_OF_SPEC, [W]=WARN
[ 69.261650] RIP: 0010:idpf_vport_splitq_napi_poll (include/linux/skbuff.h:3020) idpf
[ 69.261677] ? __warn (kernel/panic.c:242 kernel/panic.c:748)
[ 69.261682] ? idpf_vport_splitq_napi_poll (include/linux/skbuff.h:3020) idpf
[ 69.261687] ? report_bug (lib/bug.c:?)
[ 69.261690] ? handle_bug (arch/x86/kernel/traps.c:285)
[ 69.261694] ? exc_invalid_op (arch/x86/kernel/traps.c:309)
[ 69.261697] ? asm_exc_invalid_op (arch/x86/include/asm/idtentry.h:621)
[ 69.261700] ? __pfx_idpf_vport_splitq_napi_poll (drivers/net/ethernet/intel/idpf/idpf_txrx.c:4011) idpf
[ 69.261704] ? idpf_vport_splitq_napi_poll (include/linux/skbuff.h:3020) idpf
[ 69.261708] ? idpf_vport_splitq_napi_poll (drivers/net/ethernet/intel/idpf/idpf_txrx.c:3072) idpf
[ 69.261712] __napi_poll (net/core/dev.c:7194)
[ 69.261716] net_rx_action (net/core/dev.c:7265)
[ 69.261718] ? __qdisc_run (net/sched/sch_generic.c:293)
[ 69.261721] ? sched_clock (arch/x86/include/asm/preempt.h:84 arch/x86/kernel/tsc.c:288)
[ 69.261726] handle_softirqs (kernel/softirq.c:561) |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: x86: Load DR6 with guest value only before entering .vcpu_run() loop
Move the conditional loading of hardware DR6 with the guest's DR6 value
out of the core .vcpu_run() loop to fix a bug where KVM can load hardware
with a stale vcpu->arch.dr6.
When the guest accesses a DR and host userspace isn't debugging the guest,
KVM disables DR interception and loads the guest's values into hardware on
VM-Enter and saves them on VM-Exit. This allows the guest to access DRs
at will, e.g. so that a sequence of DR accesses to configure a breakpoint
only generates one VM-Exit.
For DR0-DR3, the logic/behavior is identical between VMX and SVM, and also
identical between KVM_DEBUGREG_BP_ENABLED (userspace debugging the guest)
and KVM_DEBUGREG_WONT_EXIT (guest using DRs), and so KVM handles loading
DR0-DR3 in common code, _outside_ of the core kvm_x86_ops.vcpu_run() loop.
But for DR6, the guest's value doesn't need to be loaded into hardware for
KVM_DEBUGREG_BP_ENABLED, and SVM provides a dedicated VMCB field whereas
VMX requires software to manually load the guest value, and so loading the
guest's value into DR6 is handled by {svm,vmx}_vcpu_run(), i.e. is done
_inside_ the core run loop.
Unfortunately, saving the guest values on VM-Exit is initiated by common
x86, again outside of the core run loop. If the guest modifies DR6 (in
hardware, when DR interception is disabled), and then the next VM-Exit is
a fastpath VM-Exit, KVM will reload hardware DR6 with vcpu->arch.dr6 and
clobber the guest's actual value.
The bug shows up primarily with nested VMX because KVM handles the VMX
preemption timer in the fastpath, and the window between hardware DR6
being modified (in guest context) and DR6 being read by guest software is
orders of magnitude larger in a nested setup. E.g. in non-nested, the
VMX preemption timer would need to fire precisely between #DB injection
and the #DB handler's read of DR6, whereas with a KVM-on-KVM setup, the
window where hardware DR6 is "dirty" extends all the way from L1 writing
DR6 to VMRESUME (in L1).
L1's view:
==========
<L1 disables DR interception>
CPU 0/KVM-7289 [023] d.... 2925.640961: kvm_entry: vcpu 0
A: L1 Writes DR6
CPU 0/KVM-7289 [023] d.... 2925.640963: <hack>: Set DRs, DR6 = 0xffff0ff1
B: CPU 0/KVM-7289 [023] d.... 2925.640967: kvm_exit: vcpu 0 reason EXTERNAL_INTERRUPT intr_info 0x800000ec
D: L1 reads DR6, arch.dr6 = 0
CPU 0/KVM-7289 [023] d.... 2925.640969: <hack>: Sync DRs, DR6 = 0xffff0ff0
CPU 0/KVM-7289 [023] d.... 2925.640976: kvm_entry: vcpu 0
L2 reads DR6, L1 disables DR interception
CPU 0/KVM-7289 [023] d.... 2925.640980: kvm_exit: vcpu 0 reason DR_ACCESS info1 0x0000000000000216
CPU 0/KVM-7289 [023] d.... 2925.640983: kvm_entry: vcpu 0
CPU 0/KVM-7289 [023] d.... 2925.640983: <hack>: Set DRs, DR6 = 0xffff0ff0
L2 detects failure
CPU 0/KVM-7289 [023] d.... 2925.640987: kvm_exit: vcpu 0 reason HLT
L1 reads DR6 (confirms failure)
CPU 0/KVM-7289 [023] d.... 2925.640990: <hack>: Sync DRs, DR6 = 0xffff0ff0
L0's view:
==========
L2 reads DR6, arch.dr6 = 0
CPU 23/KVM-5046 [001] d.... 3410.005610: kvm_exit: vcpu 23 reason DR_ACCESS info1 0x0000000000000216
CPU 23/KVM-5046 [001] ..... 3410.005610: kvm_nested_vmexit: vcpu 23 reason DR_ACCESS info1 0x0000000000000216
L2 => L1 nested VM-Exit
CPU 23/KVM-5046 [001] ..... 3410.005610: kvm_nested_vmexit_inject: reason: DR_ACCESS ext_inf1: 0x0000000000000216
CPU 23/KVM-5046 [001] d.... 3410.005610: kvm_entry: vcpu 23
CPU 23/KVM-5046 [001] d.... 3410.005611: kvm_exit: vcpu 23 reason VMREAD
CPU 23/KVM-5046 [001] d.... 3410.005611: kvm_entry: vcpu 23
CPU 23/KVM-5046 [001] d.... 3410.
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btusb: mediatek: Add locks for usb_driver_claim_interface()
The documentation for usb_driver_claim_interface() says that "the
device lock" is needed when the function is called from places other
than probe(). This appears to be the lock for the USB interface
device. The Mediatek btusb code gets called via this path:
Workqueue: hci0 hci_power_on [bluetooth]
Call trace:
usb_driver_claim_interface
btusb_mtk_claim_iso_intf
btusb_mtk_setup
hci_dev_open_sync
hci_power_on
process_scheduled_works
worker_thread
kthread
With the above call trace the device lock hasn't been claimed. Claim
it.
Without this fix, we'd sometimes see the error "Failed to claim iso
interface". Sometimes we'd even see worse errors, like a NULL pointer
dereference (where `intf->dev.driver` was NULL) with a trace like:
Call trace:
usb_suspend_both
usb_runtime_suspend
__rpm_callback
rpm_suspend
pm_runtime_work
process_scheduled_works
Both errors appear to be fixed with the proper locking. |
| In the Linux kernel, the following vulnerability has been resolved:
mm: hugetlb: independent PMD page table shared count
The folio refcount may be increased unexpectly through try_get_folio() by
caller such as split_huge_pages. In huge_pmd_unshare(), we use refcount
to check whether a pmd page table is shared. The check is incorrect if
the refcount is increased by the above caller, and this can cause the page
table leaked:
BUG: Bad page state in process sh pfn:109324
page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x66 pfn:0x109324
flags: 0x17ffff800000000(node=0|zone=2|lastcpupid=0xfffff)
page_type: f2(table)
raw: 017ffff800000000 0000000000000000 0000000000000000 0000000000000000
raw: 0000000000000066 0000000000000000 00000000f2000000 0000000000000000
page dumped because: nonzero mapcount
...
CPU: 31 UID: 0 PID: 7515 Comm: sh Kdump: loaded Tainted: G B 6.13.0-rc2master+ #7
Tainted: [B]=BAD_PAGE
Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015
Call trace:
show_stack+0x20/0x38 (C)
dump_stack_lvl+0x80/0xf8
dump_stack+0x18/0x28
bad_page+0x8c/0x130
free_page_is_bad_report+0xa4/0xb0
free_unref_page+0x3cc/0x620
__folio_put+0xf4/0x158
split_huge_pages_all+0x1e0/0x3e8
split_huge_pages_write+0x25c/0x2d8
full_proxy_write+0x64/0xd8
vfs_write+0xcc/0x280
ksys_write+0x70/0x110
__arm64_sys_write+0x24/0x38
invoke_syscall+0x50/0x120
el0_svc_common.constprop.0+0xc8/0xf0
do_el0_svc+0x24/0x38
el0_svc+0x34/0x128
el0t_64_sync_handler+0xc8/0xd0
el0t_64_sync+0x190/0x198
The issue may be triggered by damon, offline_page, page_idle, etc, which
will increase the refcount of page table.
1. The page table itself will be discarded after reporting the
"nonzero mapcount".
2. The HugeTLB page mapped by the page table miss freeing since we
treat the page table as shared and a shared page table will not be
unmapped.
Fix it by introducing independent PMD page table shared count. As
described by comment, pt_index/pt_mm/pt_frag_refcount are used for s390
gmap, x86 pgds and powerpc, pt_share_count is used for x86/arm64/riscv
pmds, so we can reuse the field as pt_share_count. |
| In the Linux kernel, the following vulnerability has been resolved:
net/smc: check return value of sock_recvmsg when draining clc data
When receiving clc msg, the field length in smc_clc_msg_hdr indicates the
length of msg should be received from network and the value should not be
fully trusted as it is from the network. Once the value of length exceeds
the value of buflen in function smc_clc_wait_msg it may run into deadloop
when trying to drain the remaining data exceeding buflen.
This patch checks the return value of sock_recvmsg when draining data in
case of deadloop in draining. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: sync_linked_regs() must preserve subreg_def
Range propagation must not affect subreg_def marks, otherwise the
following example is rewritten by verifier incorrectly when
BPF_F_TEST_RND_HI32 flag is set:
0: call bpf_ktime_get_ns call bpf_ktime_get_ns
1: r0 &= 0x7fffffff after verifier r0 &= 0x7fffffff
2: w1 = w0 rewrites w1 = w0
3: if w0 < 10 goto +0 --------------> r11 = 0x2f5674a6 (r)
4: r1 >>= 32 r11 <<= 32 (r)
5: r0 = r1 r1 |= r11 (r)
6: exit; if w0 < 0xa goto pc+0
r1 >>= 32
r0 = r1
exit
(or zero extension of w1 at (2) is missing for architectures that
require zero extension for upper register half).
The following happens w/o this patch:
- r0 is marked as not a subreg at (0);
- w1 is marked as subreg at (2);
- w1 subreg_def is overridden at (3) by copy_register_state();
- w1 is read at (5) but mark_insn_zext() does not mark (2)
for zero extension, because w1 subreg_def is not set;
- because of BPF_F_TEST_RND_HI32 flag verifier inserts random
value for hi32 bits of (2) (marked (r));
- this random value is read at (5). |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath11k: Ignore frags from uninitialized peer in dp.
When max virtual ap interfaces are configured in all the bands with
ACS and hostapd restart is done every 60s, a crash is observed at
random times.
In this certain scenario, a fragmented packet is received for
self peer, for which rx_tid and rx_frags are not initialized in
datapath. While handling this fragment, crash is observed as the
rx_frag list is uninitialised and when we walk in
ath11k_dp_rx_h_sort_frags, skb null leads to exception.
To address this, before processing received fragments we check
dp_setup_done flag is set to ensure that peer has completed its
dp peer setup for fragment queue, else ignore processing the
fragments.
Call trace:
ath11k_dp_process_rx_err+0x550/0x1084 [ath11k]
ath11k_dp_service_srng+0x70/0x370 [ath11k]
0xffffffc009693a04
__napi_poll+0x30/0xa4
net_rx_action+0x118/0x270
__do_softirq+0x10c/0x244
irq_exit+0x64/0xb4
__handle_domain_irq+0x88/0xac
gic_handle_irq+0x74/0xbc
el1_irq+0xf0/0x1c0
arch_cpu_idle+0x10/0x18
do_idle+0x104/0x248
cpu_startup_entry+0x20/0x64
rest_init+0xd0/0xdc
arch_call_rest_init+0xc/0x14
start_kernel+0x480/0x4b8
Code: f9400281 f94066a2 91405021 b94a0023 (f9406401)
Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 |
| In the Linux kernel, the following vulnerability has been resolved:
IB/rdmavt: add lock to call to rvt_error_qp to prevent a race condition
The documentation of the function rvt_error_qp says both r_lock and s_lock
need to be held when calling that function. It also asserts using lockdep
that both of those locks are held. However, the commit I referenced in
Fixes accidentally makes the call to rvt_error_qp in rvt_ruc_loopback no
longer covered by r_lock. This results in the lockdep assertion failing
and also possibly in a race condition. |
| Protection mechanism failure for some Intel(R) AI Reference Models before version v3.4.1 within Ring 3: User Applications may allow an escalation of privilege. Unprivileged software adversary with a privileged user combined with a low complexity attack may enable escalation of privilege. This result may potentially occur via local access when attack requirements are present without special internal knowledge and requires passive user interaction. The potential vulnerability may impact the confidentiality (high), integrity (high) and availability (high) of the vulnerable system, resulting in subsequent system confidentiality (none), integrity (none) and availability (none) impacts. |
| Backstage is an open framework for building developer portals. Prior to 0.29.2, the experimental dynamic client registration and client ID metadata document features in the @backstage/plugin-auth-backend use full-string matcher.isMatch glob matching for auth.experimentalDynamicClientRegistration.allowedRedirectUriPatterns and the auth.experimentalClientIdMetadataDocuments allowedClientIdPatterns and allowedRedirectUriPatterns options. A hostname wildcard can match across URL component boundaries, allowing an attacker-controlled redirect URI with a trusted hostname suffix in its path to pass the allowlist and receive an OAuth authorization code after a victim completes the flow. Patterns without an explicit protocol can match unintended protocols, and redirect URIs containing embedded credentials are accepted after user information is stripped for matching. The features are experimental and disabled by default; only deployments that enable them and configure custom wildcard-hostname or protocol-less patterns are affected. This issue is first fixed in prerelease version 0.29.2. |
| Progress MarkLogic Server 12.x releases before 12.1.0 and 11.x releases before 11.3.7 enable XML external entity processing by default in multiple server paths, which could allow crafted XML to cause server-side requests or disclosure of local files. |
| OTRS does not sufficiently enforce the uniqueness of customer user identities across multiple configured CustomerUser backends. When multiple backends, such as a database and LDAP, are configured, the uniqueness check for customer user email addresses is performed only within the selected backend. As a result, an authenticated user with permission to create or modify customer users may create a customer user whose email address is already assigned to a customer user in another backend.
This can result in multiple customer user records representing the same communication identity. Depending on the affected workflow and backend resolution, customer-related information or email communication may subsequently be associated with or exposed to the wrong customer user.
The vulnerability does not allow unauthenticated users to create customer accounts. Exploitation requires permissions to create or modify customer users.
This issue affects OTRS:
* 7.0.X
* 8.0.X
* 2023.X
* 2024.X
* 2025.X
* 2026.X before 2026.7.X
Please note that ((OTRS)) Community Edition 6.x and before are vulnerable. Products based on the ((OTRS)) Community Edition also very likely to be affected |
| JIT miscompilation in the JavaScript Engine: JIT component. This vulnerability was fixed in Firefox 158, Firefox ESR 115.43, Firefox ESR 153.5, Thunderbird 158, and Thunderbird 153.5. |
