| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath12k: Avoid memory leak while enabling statistics
Driver uses monitor destination rings for extended statistics mode and
standalone monitor mode. In extended statistics mode, TLVs are parsed from
the buffer received from the monitor destination ring and assigned to the
ppdu_info structure to update per-packet statistics. In standalone monitor
mode, along with per-packet statistics, the packet data (payload) is
captured, and the driver updates per MSDU to mac80211.
When the AP interface is enabled, only extended statistics mode is
activated. As part of enabling monitor rings for collecting statistics,
the driver subscribes to HAL_RX_MPDU_START TLV in the filter
configuration. This TLV is received from the monitor destination ring, and
kzalloc for the mon_mpdu object occurs, which is not freed, leading to a
memory leak. The kzalloc for the mon_mpdu object is only required while
enabling the standalone monitor interface. This causes a memory leak while
enabling extended statistics mode in the driver.
Fix this memory leak by removing the kzalloc for the mon_mpdu object in
the HAL_RX_MPDU_START TLV handling. Additionally, remove the standalone
monitor mode handlings in the HAL_MON_BUF_ADDR and HAL_RX_MSDU_END TLVs.
These TLV tags will be handled properly when enabling standalone monitor
mode in the future.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 |
| The Formidable Forms WordPress plugin before 7.0 does not verify the identity of the caller before recording the timestamp it uses to rate limit payment gateway verification requests, allowing unauthenticated attackers to consume the daily allowance and cause legitimate verification attempts to be refused for the next 24 hours. |
| Vulnerability in the Oracle Solaris product of Oracle Systems (component: Services). The supported version that is affected is 11.4. Difficult to exploit vulnerability allows low privileged attacker with logon to the infrastructure where Oracle Solaris executes to compromise Oracle Solaris. Successful attacks of this vulnerability can result in unauthorized ability to cause a hang or frequently repeatable crash (complete DOS) of Oracle Solaris. CVSS 3.1 Base Score 4.7 (Availability impacts). CVSS Vector: (CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H). |
| Vulnerability in the Oracle Solaris product of Oracle Systems (component: Services). The supported version that is affected is 11.4. Easily exploitable vulnerability allows unauthenticated attacker with network access via HTTP to compromise Oracle Solaris. Successful attacks of this vulnerability can result in unauthorized ability to cause a hang or frequently repeatable crash (complete DOS) of Oracle Solaris and unauthorized read access to a subset of Oracle Solaris accessible data. CVSS 3.1 Base Score 8.2 (Confidentiality and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:H). |
| Vulnerability in the Oracle Net Services component of Oracle Database Server. Supported versions that are affected are 19.3-19.32, 21.3-21.23 and 23.4.0-23.26.3. Easily exploitable vulnerability allows high privileged attacker having None privilege with logon to the infrastructure where Oracle Net Services executes to compromise Oracle Net Services. Successful attacks of this vulnerability can result in unauthorized ability to cause a hang or frequently repeatable crash (complete DOS) of Oracle Net Services. CVSS 3.1 Base Score 4.4 (Availability impacts). CVSS Vector: (CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:U/C:N/I:N/A:H). |
| A flaw was found in gnome-remote-desktop as shipped in Red Hat Enterprise Linux. When the daemon is running in system mode with RDP enabled, the incoming connection handler bypasses the connection throttler, allowing an unauthenticated remote attacker to open many parallel pre-authentication connections to the RDP listener. This can accumulate accepted sockets and pending routing-token operations until timeout, exhausting resources and preventing legitimate users from establishing RDP sessions. This issue does not affect the upstream version. |
| Vulnerability in the PeopleSoft Enterprise PeopleTools product of Oracle PeopleSoft (component: Porting). Supported versions that are affected are 8.61-8.63. Easily exploitable vulnerability allows low privileged attacker with logon to the infrastructure where PeopleSoft Enterprise PeopleTools executes to compromise PeopleSoft Enterprise PeopleTools. Successful attacks of this vulnerability can result in unauthorized ability to cause a hang or frequently repeatable crash (complete DOS) of PeopleSoft Enterprise PeopleTools as well as unauthorized update, insert or delete access to some of PeopleSoft Enterprise PeopleTools accessible data and unauthorized read access to a subset of PeopleSoft Enterprise PeopleTools accessible data. CVSS 3.1 Base Score 6.6 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:L/I:L/A:H). |
| A denial of service vulnerability exists when Microsoft Common Object Runtime Library improperly handles web requests. An attacker who successfully exploited this vulnerability could cause a denial of service against a .NET web application.
A remote unauthenticated attacker could exploit this vulnerability by issuing specially crafted requests to the .NET application.
The update addresses the vulnerability by correcting how the .NET web application handles web requests. |
| A vulnerability was found in Eleveo Quality Management 9.7.0. This issue affects some unknown processing of the file /enc-fwk-data/api/v3/conversations/<ID>/events of the component Conversation Handler. The manipulation of the argument labels results in denial of service. The attack can be executed remotely. The exploit has been made public and could be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability in the bulk port configuration functionality could allow an unauthenticated attacker to crash the service. |
| Nginx UI is a web user interface for the Nginx web server. From 2.5.0 until 2.6.0, the node-signature authentication path performs temporary file staging of an attacker-controlled request body and synchronizes it before validating the body digest and cryptographic signature. An unauthenticated remote client that can reach the API and provide syntactically valid signature metadata can consume temporary filesystem capacity, disk input and output, and request-processing resources before rejection. The issue affects availability and does not bypass authentication or provide confidentiality or integrity impact. This issue is fixed in version 2.6.0. |
| Pre-authentication OIDC discovery and JWKS fetches run synchronously on the asyncio event loop, so one unauthenticated request stalls the whole service. |
| In Eclipse ioFog Controller versions 3.8.0 through 3.9.1, POST, PUT, and PATCH bodies on routes that enable template substitution are rendered by an uncapped Liquid engine before authentication and RBAC. The bearer check does not reject a missing or invalid token, and the auth rate limit applies only to user login routes. A small JSON body can stall or abort the Controller process. The anonymous caller does not receive the rendered result; the impact is availability of the control plane, including the agent API and in-process WebSocket relays on that process. |
| One logical thread of a user-mode ThreadX module costs the Module Manager's shared object pool two allocations, not one. The module asks for a `TX_THREAD` control block through `txm_module_object_allocate`; `_txm_module_manager_thread_create` then takes a second allocation of `TXM_MODULE_KERNEL_STACK_SIZE` bytes for the privileged kernel stack that thread's system calls run on, and records it in the control block. Both come from `_txm_module_manager_object_pool` and both are linked onto the module's allocation list.
The Module Manager's thread-delete dispatcher released only the first. The kernel stack stayed allocated until the whole module was stopped, so a module that creates, terminates and deletes threads in a loop — every state transition valid, every service returning `TX_SUCCESS` — removed a fixed block from a finite pool shared by the manager and by every other loaded module, on every cycle, for as long as it stayed loaded. Once the pool is exhausted, no memory-protected module can create any kernel object and no user-mode module thread can be created anywhere in the system.
Vulnerable function: `_txm_module_manager_tx_thread_delete_dispatch`, in `common_modules/module_manager/inc/txm_module_manager_dispatch.h`. |
| An unlimited gzip decompression routine in chttpd in Apache CouchDB 3.5.2 and below on all platforms allows any remote client to cause a denial of service via memory exhaustion.
Users are recommended to upgrade to version 3.5.3, which fixes this issue. |
| ApostropheCMS is an open-source Node.js content management system. Prior to 1.1.0 of db-connect and 4.33.0 of ApostropheCMS, an account with view-draft access can submit a projection exclusion path that traverses through a constructor prototype chain to a shared prototype member when a consumer uses a SQLite, PostgreSQL, or multipostgres adapter and has a matching document. Every editing role has view-draft access, while guestApiAccess broadens this prerequisite to any logged-in account. The unsetNestedField helper then deletes the shared runtime member, causing persistent process-wide integrity and availability effects; the default MongoDB adapter is not affected. This issue is fixed in db-connect 1.1.0 and ApostropheCMS 4.33.0. |
| The Bluetooth Classic Hands-Free Profile HF role in subsys/bluetooth/host/classic/hfp_hf.c does not release the AT command buffers that are still queued on hf->tx_pending when the RFCOMM DLC goes down. hfp_hf_disconnected() only cancelled the work items and cleared hf->acl, and no other code path ever dequeues those buffers, so each one is permanently lost from the fixed hf_pool (CONFIG_BT_MAX_CONN + 1 buffers, i.e. two in the default configuration). The same function also left BT_HFP_HF_FLAG_CONNECTED set, and hfp_hf_create() wiped the object with memset() as soon as hf->acl was NULL, without checking whether hf->work, hf->slc_work or hf->deferred_work was still pending or running.
The remote Audio Gateway peer controls the trigger end to end and needs no application involvement: an unsolicited +BCS: 1 response makes bcs_handle() call bt_hfp_hf_select_codec() and queue an AT+BCS buffer, which cannot be transmitted while BT_HFP_HF_FLAG_RX_ONGOING is set, and an immediately following RFCOMM DISC strands that buffer. Repeating the connect / +BCS / disconnect cycle a couple of times empties hf_pool for good.
With the pool exhausted, HFP command sending fails permanently, and because hfp_hf_send_cmd() allocates with K_FOREVER (bt_rfcomm_create_pdu() → bt_conn_create_pdu()) from the Bluetooth RX context — where that timeout is not downgraded to K_NO_WAIT — one further +BCS from the peer parks the Bluetooth RX thread inside net_buf_alloc() with no possible waker, halting all HCI event processing until the device is rebooted. Separately, reusing the HF slot while a work handler was still queued or running allowed memset() to wipe live k_work items out from under the system workqueue, corrupting shared kernel workqueue state. Exploitation requires an established HFP session (for SSP devices L2CAP enforces authentication before the RFCOMM channel is reachable) and a build with CONFIG_BT_HFP_HF enabled. |
| ApostropheCMS is an open-source Node.js content management system. Prior to 3.7.1 of the import-export module, an authenticated importer can submit archives whose decompressed bytes, entry count, and entry sizes are not bounded before document-type authorization, and extraction or parsing failures can leave staging and extracted artifacts without unconditional cleanup. The already-hardened pre-authentication and write-error paths are separate, and current end-to-end denial-of-service impact from this residual path remains subject to maintainer validation. This issue is fixed in version 3.7.1. |
| ApostropheCMS is an open-source Node.js content management system. Prior to 4.33.0 of ApostropheCMS and 3.7.0 of the import-export module, import routes invoke bigUploadMiddleware without an early authorize callback, allowing unauthenticated requests to perform upload initialization, chunk storage, temporary processing, and attacker-declared cleanup work before the later user check rejects the import. This issue is fixed in ApostropheCMS 4.33.0 and import-export 3.7.0. |
| Denial-of-service in the PDF Viewer component. This vulnerability was fixed in Firefox 158.0.1 and Thunderbird 158.0.1. |
