| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: seq: oss: Reject reads that cannot fit the next event
snd_seq_oss_read() checks whether the next queued OSS sequencer event
fits in the remaining userspace buffer before removing it from the read
queue.
The check is inverted. It currently stops when the event is smaller than
the remaining buffer, so a normal 4-byte event is not copied for an
8-byte read buffer. Conversely, an 8-byte event can be copied for a
smaller read count.
Break only when the remaining userspace buffer is smaller than the next
event, and report -EINVAL if no complete event has been copied. This
prevents an undersized read from looking like end-of-file while leaving
the event queued for a later read with a large enough buffer. |
| Out-of-bounds write in Windows Fast FAT Driver allows an authorized attacker to elevate privileges locally. |
| Snap7 through 1.4.3 contains an out-of-bounds write vulnerability in the passive partner that allows a malicious active partner to overflow application buffers by declaring an unvalidated BSend total length. Attackers connecting from the configured peer address can declare up to 65535 bytes and send a short fragment, causing BRecv to memcpy past the buffer and crash or corrupt SCADA, HMI or gateway processes. |
| Vyper from 0.2.13 before 0.2.15 allocates storage slots for @nonreentrant reentrancy locks at the same locations as contract storage variables. When a function using @nonreentrant is called, setting the lock overwrites the overlapping storage variable, corrupting contract state and breaking the contract's intended logic. |
| In the Linux kernel, the following vulnerability has been resolved:
firmware: arm_scmi: Validate BASE_ERROR_EVENT payload size
BASE_ERROR_EVENT carries a variable number of message reports,
with the count encoded in error_status. The notification parser used
that count without checking whether the received payload contained all
reported entries.
Reject truncated payloads before copying the report array. |
| An Out-of-bounds Write vulnerability in the routing protocol daemon (rpd) of Juniper Networks Junos OS and Junos OS Evolved allows an eBGP peer which has not negotiated four-octet-AS capability sending a specifically malformed BGP update to cause a Denial-of-Service (DoS). |
| The SOAP HTTP client guards its response buffer growth with a check that relies on signed integer overflow, which is undefined behaviour and is not guaranteed to trigger. When the check is optimised away, a malicious SOAP server can make the client allocate a buffer far smaller than the data it then writes into it, producing a heap buffer overflow. |
| A flaw was found in spice-server. Multiple migration data handlers use client-supplied offsets from SPICE_MSGC_MIGRATE_DATA messages without bounds validation, allowing a malicious authenticated SPICE client during VM live migration to read arbitrary heap memory or trigger heap corruption via out-of-bounds read and write operations on the message buffer. |
| MariaDB server is a community developed fork of MySQL server. From 10.6.1 until 10.6.28, 10.11.19, 11.4.13, 11.8.9, 12.3.3, and 13.0.2, ST_AsText can write beyond an allocated output buffer when converting deeply nested GeometryCollections because recursive WKT serialization does not account for bytes consumed or reserve sufficient space. A low-privileged remote attacker can submit a specially crafted GIS object to corrupt memory and potentially achieve code execution when combined with another vulnerability. This issue is fixed in versions 10.6.28, 10.11.19, 11.4.13, 11.8.9, 12.3.3, and 13.0.2. |
| In the Linux kernel, the following vulnerability has been resolved:
nvmet-auth: fix out-of-bounds write in nvmet_auth_challenge()
nvmet_auth_challenge() receives its output buffer as a void pointer.
sizeof(*d) therefore evaluates to one with GCC and undercounts the fixed
challenge header by 15 bytes. A short AUTH_RECEIVE buffer can pass the
check before the challenge is copied past the end of its allocation.
Use the typed challenge pointer when calculating the response size.
BUG: KASAN: slab-out-of-bounds in nvmet_execute_auth_receive (drivers/nvme/target/fabrics-cmd-auth.c:442 drivers/nvme/target/fabrics-cmd-auth.c:569)
Write of size 32 by task kworker/1:1H/64
Workqueue: nvmet_tcp_wq nvmet_tcp_io_work
Call Trace:
nvmet_execute_auth_receive (drivers/nvme/target/fabrics-cmd-auth.c:442 drivers/nvme/target/fabrics-cmd-auth.c:569)
nvmet_tcp_try_recv_pdu (drivers/nvme/target/tcp.c:1119 drivers/nvme/target/tcp.c:1243)
nvmet_tcp_io_work (drivers/nvme/target/tcp.c:1350 drivers/nvme/target/tcp.c:1382 drivers/nvme/target/tcp.c:1445)
process_one_work (kernel/workqueue.c:3322)
worker_thread (kernel/workqueue.c:3405 kernel/workqueue.c:3486)
kthread (kernel/kthread.c:436)
ret_from_fork (arch/x86/kernel/process.c:158)
ret_from_fork_asm (arch/x86/entry/entry_64.S:245)
The buggy address is located 16 bytes inside of
allocated 33-byte region [ffff888000554e80, ffff888000554ea1)
Kernel panic - not syncing: KASAN: panic_on_warn set ... |
| CFITSIO through 4.7.0 contains an out-of-bounds write vulnerability in ffgcls2() in getcols.c that trusts attacker-controlled heap descriptor lengths for variable-length string columns. Attackers can supply a crafted FITS file that overflows a fixed 28,800-byte stack buffer and the caller's string array, enabling arbitrary code execution. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix BPF_F_CPU validation for sparse CPU IDs
BPF_F_CPU stores the target CPU ID in the upper 32 bits of the map
operation flags. bpf_map_check_op_flags() currently compares that ID
with num_possible_cpus(), which is the number of possible CPUs rather
than a bound on CPU IDs.
On an arm64 QEMU guest with a CPU device-tree hole, the possible CPU
mask was 0,2-3. A userspace program using raw bpf() syscalls creates
a BPF_MAP_TYPE_PERCPU_ARRAY and performs update and lookup operations
for each CPU by setting BPF_F_CPU and the CPU ID in the flags.
With the old check, CPU 1 is incorrectly accepted while valid CPU 3 is
rejected with -ERANGE. The CPU 1 update then reaches the per-CPU map
access path and triggers:
Unable to handle kernel paging request at virtual address ...
pc : __pi_memcpy_generic+0x5c/0x22c
lr : bpf_percpu_array_update+0x2dc/0x2e8
Call trace:
__pi_memcpy_generic
bpf_map_update_value
map_update_elem
__sys_bpf
Check the CPU ID against nr_cpu_ids and cpu_possible() instead. This
rejects CPU IDs outside the valid range and CPUs absent from the
possible mask, while allowing valid sparse CPU IDs. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ipconfig: bound DHCP option construction
ic_dhcp_init_options() appends the hostname (option 12), vendor-class
(option 60) and client-ID (option 61) options into the fixed 312-byte
bootp_pkt.exten[] buffer. Only the client-ID branch checked the
remaining space; the hostname and vendor-class writes were unbounded.
A 64-byte hostname together with the maximum 252-byte dhcpclass=
identifier needs 18 + (2 + 64) + (2 + 252) = 338 of the 312 available
bytes even before the terminating END marker, so the vendor-class memcpy
runs past the end of exten[]. With CONFIG_FORTIFY_SOURCE this is
reported as a field-spanning write and, when the kernel is booted with
panic_on_warn=1, aborts boot with a panic.
Route the optional options through a common helper that makes sure the
option, its 2-byte header and the END marker all fit and drops an option
that would not. Configurations with short options keep sending exactly
the same bytes as before. |
| F´ (F Prime) is a framework that enables development and deployment of spaceflight and other embedded software applications. Prior to 4.2.0, Svc::FpySequencer STORE directive stack write validation the bounds check adds attacker-controlled offset and size before memcpy, allowing integer wraparound to make an out-of-range destination appear valid. When a sequence-controlled STORE directive supplies a stack offset and size whose U32 sum wraps, memcpy can write outside the sequencer stack, causing memory corruption, denial of service, and potentially code execution. This issue is fixed in version 4.2.0. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: block: Fix zones_cond out-of-bounds write on zone report
blk_revalidate_disk_zones() sizes the zones_cond array from the disk
capacity and zone size, but the index used by blk_revalidate_zone_cond()
comes from the device-driven report_zones() walk and is never checked
against the array size. A device reporting more zones than fit the array
makes blk_zone_set_cond() write out of bounds.
One way to reach this is a zone count exceeding 32 bits: both
blk_revalidate_zone_args.nr_zones and struct zoned_disk_info.nr_zones are
unsigned int, so a disk advertising more than UINT_MAX zones (e.g. 2^32 +
1024 zones of one 512-byte logical block) gets its zone count truncated to
a small value, undersizing the array while the report walk keeps counting
upward.
Check the index against the array size before storing the zone condition,
and refuse to revalidate when the zone count does not fit 32 bits. |
| An Out-of-bounds Write vulnerability in the routing protocol daemon (rpd) of Juniper Networks Junos OS and Junos OS Evolved allows an adjacent attacker which sends a specific set of BGP communities to cause a Denial-of-Service (DoS) as rpd crashes when graceful-shutdown sender community is added when attempting to advertise. |
| A flaw was found in the DPDK GSO library. When software GSO copies packet headers into a new mbuf, it does not check that the header fits in the source first segment or in the destination buffer, and a header longer than the configured GSO segment size can underflow the payload-size calculation. A remote or guest-supplied packet processed with software GSO can trigger an out-of-bounds read or write. |
| A vulnerability exists in NGINX Plus and NGINX Open Source when a location is configured that uses the alias directive together with rewrite and a set or return directive referencing the $request_filename variable. Alternatively, the same result could be achieved when the $request_filename variable is used in an access log format directive. An unauthenticated attacker along with conditions beyond their control can exploit this vulnerability by sending crafted HTTP requests. This may cause a heap buffer overflow in the NGINX worker process leading to a restart. Additionally, attackers can execute code on systems with Address Space Layout Randomization (ASLR) disabled or when the attacker can bypass ASLR.
Impact:
This vulnerability may allow remote attackers to cause a denial-of-service (DoS) on the NGINX system or to possibly trigger a code execution. There is no control plane exposure; this is a data plane issue only.
Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated. |
| Out-of-bounds write vulnerability in Citrix Workspace app for Windows.
This issue affects Workspace app for Windows: before 2603.20 CR, before LTSR 2607 Hotfix 1, and before LTSR 2507 CU3 Hotfix 1. |
| A flaw was found in xorg-x11-server. In the X Keyboard Extension (XKB), key name memory is allocated with an insufficient buffer size compared to the maximum supported range. An authenticated local client can exploit this flaw by sending requests that modify the keycode range, triggering a heap-based buffer overflow. This vulnerability can lead to arbitrary code execution or cause a Denial of Service (DoS) by crashing the X server. |
