| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| FreeRDP from 2.0.0 before 3.32.0 contains a memory exhaustion vulnerability in wts_read_drdynvc_data_first that allows authenticated clients to force servers to commit large memory allocations. Attackers can send a seven-byte DATA_FIRST message on an opened DVC declaring a large 32-bit length, causing zeroed resident memory growth and server resource exhaustion. |
| A weakness has been identified in sgl-project SGLang up to 0.5.19. Affected by this vulnerability is an unknown functionality of the file python/sglang/srt/managers/io_struct.py of the component generate Endpoint. This manipulation of the argument session_params causes denial of service. The attack is possible to be carried out remotely. The exploit has been made available to the public and could be used for attacks. The project was informed of the problem early through an issue report but has not responded yet. |
| In the Linux kernel, the following vulnerability has been resolved:
octeontx2-af: fix cn20k mailbox lifetime on repeated rvu_mbox_init()
rvu_mbox_init() is called separately for AF-PF mailboxes during probe
and for AF-VF mailboxes when SR-IOV is enabled. Each call used to
allocate a new ng_rvu object, leaking the first allocation when the
pointer was overwritten on the second call.
Sharing one ng_rvu across both paths exposed several teardown bugs:
the error path freed all cn20k mailbox DMA and kfree()d ng_rvu even
when only the failing init type should be unwound, leaving live AF-PF
mailbox memory in use after an AF-VF init failure. mutex_init() was
also re-run on the AF-VF path while AF-PF mailbox handlers could still
hold rvu->mbox_lock. Probe and SR-IOV failure paths did not release
cn20k mailbox DMA either, since cleanup only happened in rvu_remove().
Allocate ng_rvu once with devm_kzalloc(), initialize mbox_lock in the
same block, unwind only the mailbox memory for the failing init type,
and free cn20k mailbox DMA from the probe and pci_enable_sriov()
error paths. |
| In the Linux kernel, the following vulnerability has been resolved:
nvme-pci: fix dma_vecs leak on p2p memory
We don't unmap P2P memory, so we don't need to track it. The dma_vec
allocation was getting leaked on the completion. |
| In the Linux kernel, the following vulnerability has been resolved:
nvme-pci: fix dma mapping leak on data setup error
We're leaking the initial DMA mapping during iteration if we fail to
allocate the tracking descriptor for both PRP and SGL. Unmap the
iterator directly; we can't use the existing unmap helper because it
depends on the tracking descriptor being successfully allocated, so a
new one for an in-use iterator is provided.
The mappings were also leaking when the driver detects an invalid
bio_vec when mapping PRPs, so fix that too. |
| In the Linux kernel, the following vulnerability has been resolved:
ACPI: button: Fix ACPI GPE handler leak during removal
Commit a7e23ec17fee ("ACPI: button: Install notifier for system events
as well") changed the ACPI notify handler type for ACPI buttons to
ACPI_ALL_NOTIFY, but it forgot to update acpi_button_remove() to reflect
that change. This leads to leaking the notify handler past driver
removal, which may cause a kernel crash to occur if ACPI notify on
the given device is triggered after removing the driver, and causes a
subsequent probe of the given device with the same driver to fail.
Address this by updating the acpi_remove_notify_handler() call in
acpi_button_remove() as appropriate. |
| In the Linux kernel, the following vulnerability has been resolved:
power: supply: max77705: Free allocated workqueue and fix removal order
Use devm interface for allocating workqueue to fix two bugs at the same
time:
1. Driver leaks the memory on remove(), because the workqueue is not
destroyed.
2. Driver allocates workqueue and then registers interrupt handlers
with devm interface. This means that probe error paths will not use a
reversed order, but first destroy the workqueue and then, via devm
release handlers, free the interrupt.
The interrupt handler schedules work on this exact workqueue, thus if
interrupt is hit in this short time window - after destroying
workqueue, but before devm() frees the interrupt - the schedulled
work will lead to use of freed memory.
Change is not equivalent in the workqueue itself: use non-legacy API
which does not set (__WQ_LEGACY | WQ_MEM_RECLAIM). The workqueue is
used to update power supply (power_supply_changed()) status, thus there
is no point to run it for memory reclaim. Note that dev_name() is not
directly used in second argument to prevent possible unlikely parsing
any "%" character in device name as format. |
| In the Linux kernel, the following vulnerability has been resolved:
ptp: ocp: fix resource freeing order
Commit a60fc3294a37 ("ptp: rework ptp_clock_unregister() to disable
events") added a call to ptp_disable_all_events() which changes the
configuration of pins if they support EXTTS events. In ptp_ocp_detach()
pins resources are freed before ptp_clock_unregister() and it leads to
use-after-free during driver removal. Fix it by changing the order of
free/unregister calls. To avoid irq handler running on the other core
while ptp device unregistering, call synchronize_irq() after HW is
configured to stop producing irqs and no irqs are in-flight. |
| A flaw was found in the OpenShift Lightspeed Service, which is vulnerable to unauthenticated API request flooding. Repeated queries to non-existent endpoints inflate metrics storage and processing, consuming excessive resources. This issue can lead to monitoring system degradation, increased disk usage, and potential service unavailability. Since the issue does not require authentication, an external attacker can exhaust CPU, RAM, and disk space, impacting both application and cluster stability. |
| ImageMagick before 7.1.2-32 contains a policy bypass vulnerability in the -script operation due to missing checks on file descriptor handling. Attackers can use the -script operation to close file descriptors not opened by the current operation, circumventing configured security policies. |
| ImageMagick before 6.9.13-57 and 7.x before 7.1.2-32 contains a memory leak in the SVG encoder (WriteSVGImage) that fails to release allocated memory when handling crafted images. Attackers can supply crafted image files that are processed by the SVG encoder to leak memory and cause a denial of service through resource consumption. |
| In the Linux kernel, the following vulnerability has been resolved:
isofs: validate Rock Ridge CE continuation extent against volume size
rock_continue() reads rs->cont_extent verbatim from the Rock Ridge CE
record and passes it to sb_bread() without checking that the block
number is within the mounted ISO 9660 volume. commit e595447e177b
("[PATCH] rock.c: handle corrupted directories") added cont_offset
and cont_size rejection for the CE continuation but did not validate
the extent block number itself. commit f54e18f1b831 ("isofs: Fix
infinite looping over CE entries") later capped the CE chain length
at RR_MAX_CE_ENTRIES = 32 but again left the block number unchecked.
With a crafted ISO mounted via udisks2 (desktop optical auto-mount)
or via CAP_SYS_ADMIN mount, rs->cont_extent can therefore point at
an out-of-range block or at blocks belonging to an adjacent
filesystem on the same block device. sb_bread() on an out-of-range
block returns NULL cleanly via the block layer EIO path, so there
is no memory-safety violation. For in-range reads of adjacent-
filesystem data, the CE buffer is parsed as Rock Ridge records and
only the text of SL sub-records reaches userspace through
readlink(), which makes the info-leak channel narrow and difficult
to exploit; still, rejecting the malformed CE outright matches the
rejection shape already present in the same function for
cont_offset and cont_size.
Add an ISOFS_SB(sb)->s_nzones bounds check to rock_continue() next
to the existing offset/size rejection, printing the same
corrupted-directory-entry notice. |
| In the Linux kernel, the following vulnerability has been resolved:
net/rds: handle zerocopy send cleanup before the message is queued
A zerocopy send can fail after user pages have been pinned but before
the message is attached to the sending socket.
The purge path currently infers zerocopy state from rm->m_rs, so an
unqueued message can be cleaned up as if it owned normal payload pages.
However, zerocopy ownership is really determined by the presence of
op_mmp_znotifier, regardless of whether the message has reached the
socket queue.
Capture op_mmp_znotifier up front in rds_message_purge() and use it as
the cleanup discriminator. If the message is already associated with a
socket, keep the existing completion path. Otherwise, drop the pinned
page accounting directly and release the notifier before putting the
payload pages.
This keeps early send failure cleanup consistent with the zerocopy
lifetime rules without changing the normal queued completion path. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ftgmac100: fix ring allocation unwind on open failure
ftgmac100_alloc_rings() allocates rx_skbs, tx_skbs, rxdes, txdes, and
rx_scratch in stages. On intermediate failures it returned -ENOMEM
directly, leaking resources allocated earlier in the function.
Rework the failure path to use staged local unwind labels and free
allocated resources in reverse order before returning -ENOMEM. This
matches common netdev allocation cleanup style. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: server: fix active_num_conn leak on transport allocation failure
Commit 77ffbcac4e56 ("smb: server: fix leak of active_num_conn in
ksmbd_tcp_new_connection()") addressed the kthread_run() failure
path. The earlier alloc_transport() == NULL path in the same
function has the same leak, is reachable pre-authentication via any
TCP connect to port 445, and was empirically reproduced on UML
(ARCH=um, v7.0-rc7): a small number of forced allocation failures
were sufficient to put ksmbd into a state where every subsequent
connection attempt was rejected for the remainder of the boot.
ksmbd_kthread_fn() increments active_num_conn before calling
ksmbd_tcp_new_connection() and discards the return value, so when
alloc_transport() returns NULL the socket is released and -ENOMEM
returned without decrementing the counter. Each such failure
permanently consumes one slot from the max_connections pool; once
cumulative failures reach the cap, atomic_inc_return() hits the
threshold on every subsequent accept and every new connection is
rejected. The counter is only reset by module reload.
An unauthenticated remote attacker can drive the server toward the
memory pressure that makes alloc_transport() fail by holding open
connections with large RFC1002 lengths up to MAX_STREAM_PROT_LEN
(0x00FFFFFF); natural transient allocation failures on a loaded
host produce the same drift more slowly.
Mirror the existing rollback pattern in ksmbd_kthread_fn(): on the
alloc_transport() failure path, decrement active_num_conn gated on
server_conf.max_connections.
Repro details: with the patch reverted, forced alloc_transport()
NULL returns leaked counter slots and subsequent connection
attempts -- including legitimate connects issued after the
forced-fail window had closed -- were all rejected with "Limit the
maximum number of connections". With this patch applied, the same
connect sequence produces no rejections and the counter cycles
cleanly between zero and one on every accept. |
| In the Linux kernel, the following vulnerability has been resolved:
net: altera-tse: fix skb leak on DMA mapping error in tse_start_xmit()
When dma_map_single() fails in tse_start_xmit(), the function returns
NETDEV_TX_OK without freeing the skb. Since NETDEV_TX_OK tells the
stack the packet was consumed, the skb is never freed, leaking memory
on every DMA mapping failure.
Add dev_kfree_skb_any() before returning to properly free the skb. |
| In the Linux kernel, the following vulnerability has been resolved:
nfc: nci: free skb on nci_transceive early error paths
nci_transceive() takes ownership of the skb passed by the caller,
but the -EPROTO, -EINVAL, and -EBUSY error paths return without
freeing it.
Due to issues clearing NCI_DATA_EXCHANGE fixed by subsequent changes
the nci/nci_dev selftest hits the error path occasionally in NIPA,
and kmemleak detects leaks:
unreferenced object 0xff11000015ce6a40 (size 640):
comm "nci_dev", pid 3954, jiffies 4295441246
hex dump (first 32 bytes):
6b 6b 6b 6b 00 a4 00 0c 02 e1 03 6b 6b 6b 6b 6b kkkk.......kkkkk
6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk
backtrace (crc 7c40cc2a):
kmem_cache_alloc_node_noprof+0x492/0x630
__alloc_skb+0x11e/0x5f0
alloc_skb_with_frags+0xc6/0x8f0
sock_alloc_send_pskb+0x326/0x3f0
nfc_alloc_send_skb+0x94/0x1d0
rawsock_sendmsg+0x162/0x4c0
do_syscall_64+0x117/0xfc0 |
| In the Linux kernel, the following vulnerability has been resolved:
gue: Fix skb memleak with inner IP protocol 0.
syzbot reported skb memleak below. [0]
The repro generated a GUE packet with its inner protocol 0.
gue_udp_recv() returns -guehdr->proto_ctype for "resubmit"
in ip_protocol_deliver_rcu(), but this only works with
non-zero protocol number.
Let's drop such packets.
Note that 0 is a valid number (IPv6 Hop-by-Hop Option).
I think it is not practical to encap HOPOPT in GUE, so once
someone starts to complain, we could pass down a resubmit
flag pointer to distinguish two zeros from the upper layer:
* no error
* resubmit HOPOPT
[0]
BUG: memory leak
unreferenced object 0xffff888109695a00 (size 240):
comm "syz.0.17", pid 6088, jiffies 4294943096
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 40 c2 10 81 88 ff ff 00 00 00 00 00 00 00 00 .@..............
backtrace (crc a84b336f):
kmemleak_alloc_recursive include/linux/kmemleak.h:44 [inline]
slab_post_alloc_hook mm/slub.c:4958 [inline]
slab_alloc_node mm/slub.c:5263 [inline]
kmem_cache_alloc_noprof+0x3b4/0x590 mm/slub.c:5270
__build_skb+0x23/0x60 net/core/skbuff.c:474
build_skb+0x20/0x190 net/core/skbuff.c:490
__tun_build_skb drivers/net/tun.c:1541 [inline]
tun_build_skb+0x4a1/0xa40 drivers/net/tun.c:1636
tun_get_user+0xc12/0x2030 drivers/net/tun.c:1770
tun_chr_write_iter+0x71/0x120 drivers/net/tun.c:1999
new_sync_write fs/read_write.c:593 [inline]
vfs_write+0x45d/0x710 fs/read_write.c:686
ksys_write+0xa7/0x170 fs/read_write.c:738
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xa4/0xf80 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f |
| In the Linux kernel, the following vulnerability has been resolved:
vsock/virtio: cap TX credit to local buffer size
The virtio transports derives its TX credit directly from peer_buf_alloc,
which is set from the remote endpoint's SO_VM_SOCKETS_BUFFER_SIZE value.
On the host side this means that the amount of data we are willing to
queue for a connection is scaled by a guest-chosen buffer size, rather
than the host's own vsock configuration. A malicious guest can advertise
a large buffer and read slowly, causing the host to allocate a
correspondingly large amount of sk_buff memory.
The same thing would happen in the guest with a malicious host, since
virtio transports share the same code base.
Introduce a small helper, virtio_transport_tx_buf_size(), that
returns min(peer_buf_alloc, buf_alloc), and use it wherever we consume
peer_buf_alloc.
This ensures the effective TX window is bounded by both the peer's
advertised buffer and our own buf_alloc (already clamped to
buffer_max_size via SO_VM_SOCKETS_BUFFER_MAX_SIZE), so a remote peer
cannot force the other to queue more data than allowed by its own
vsock settings.
On an unpatched Ubuntu 22.04 host (~64 GiB RAM), running a PoC with
32 guest vsock connections advertising 2 GiB each and reading slowly
drove Slab/SUnreclaim from ~0.5 GiB to ~57 GiB; the system only
recovered after killing the QEMU process. That said, if QEMU memory is
limited with cgroups, the maximum memory used will be limited.
With this patch applied:
Before:
MemFree: ~61.6 GiB
Slab: ~142 MiB
SUnreclaim: ~117 MiB
After 32 high-credit connections:
MemFree: ~61.5 GiB
Slab: ~178 MiB
SUnreclaim: ~152 MiB
Only ~35 MiB increase in Slab/SUnreclaim, no host OOM, and the guest
remains responsive.
Compatibility with non-virtio transports:
- VMCI uses the AF_VSOCK buffer knobs to size its queue pairs per
socket based on the local vsk->buffer_* values; the remote side
cannot enlarge those queues beyond what the local endpoint
configured.
- Hyper-V's vsock transport uses fixed-size VMBus ring buffers and
an MTU bound; there is no peer-controlled credit field comparable
to peer_buf_alloc, and the remote endpoint cannot drive in-flight
kernel memory above those ring sizes.
- The loopback path reuses virtio_transport_common.c, so it
naturally follows the same semantics as the virtio transport.
This change is limited to virtio_transport_common.c and thus affects
virtio-vsock, vhost-vsock, and loopback, bringing them in line with the
"remote window intersected with local policy" behaviour that VMCI and
Hyper-V already effectively have.
[Stefano: small adjustments after changing the previous patch]
[Stefano: tweak the commit message] |
| In the Linux kernel, the following vulnerability has been resolved:
pnfs/flexfiles: Fix memory leak in nfs4_ff_alloc_deviceid_node()
In nfs4_ff_alloc_deviceid_node(), if the allocation for ds_versions fails,
the function jumps to the out_scratch label without freeing the already
allocated dsaddrs list, leading to a memory leak.
Fix this by jumping to the out_err_drain_dsaddrs label, which properly
frees the dsaddrs list before cleaning up other resources. |
