| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability has been identified in the GRUB2 bootloader's normal command that poses an immediate Denial of Service (DoS) risk. This flaw is a Use-after-Free issue, caused because the normal command is not properly unregistered when the module is unloaded. An attacker who can execute this command can force the system to access memory locations that are no longer valid. Successful exploitation leads directly to system instability, which can result in a complete crash and halt system availability. Impact on the data integrity and confidentiality is also not discarded. |
| A use-after-free vulnerability has been identified in the GNU GRUB (Grand Unified Bootloader). The flaw occurs because the file-closing process incorrectly retains a memory pointer, leaving an invalid reference to a file system structure. An attacker could exploit this vulnerability to cause grub to crash, leading to a Denial of Service. Possible data integrity or confidentiality compromise is not discarded. |
| A vulnerability has been identified in the GRUB2 bootloader's network module that poses an immediate Denial of Service (DoS) risk. This flaw is a Use-after-Free issue, caused because the net_set_vlan command is not properly unregistered when the network module is unloaded from memory. An attacker who can execute this command can force the system to access memory locations that are no longer valid. Successful exploitation leads directly to system instability, which can result in a complete crash and halt system availability |
| In the Linux kernel, the following vulnerability has been resolved:
mailbox: mailbox-test: free channels on probe error
On probe error, free the previously obtained channels. This not only
prevents a leak, but also UAF scenarios because the client structure
will be removed nonetheless because it was allocated with devm. |
| In the Linux kernel, the following vulnerability has been resolved:
net: enetc: fix NTMP DMA use-after-free issue
The AI-generated review reported a potential DMA use-after-free issue
[1]. If netc_xmit_ntmp_cmd() times out and returns an error, the pending
command is not explicitly aborted, while ntmp_free_data_mem()
unconditionally frees the DMA buffer. If the buffer has already been
reallocated elsewhere, this may lead to silent memory corruption. Because
the hardware eventually processes the pending command and perform a DMA
write of the response to the physical address of the freed buffer.
To resolve this issue, this patch does the following modifications:
1. Convert cbdr->ring_lock from a spinlock to a mutex
The lock was originally a spinlock in case NTMP operations might be
invoked from atomic context. After downstream support for all NTMP
tables, no such usage has materialized. A mutex lock is now required
because the driver now needs to reclaim used BDs and release associated
DMA memory within the lock's context, while dma_free_coherent() might
sleep.
2. Introduce software command BD (struct netc_swcbd)
The hardware write-back overwrites the addr and len fields of the BD,
so the driver cannot rely on the hardware BD to free the associated DMA
memory. The driver now maintains a software shadow BD storing the DMA
buffer pointer, DMA address, and size. And netc_xmit_ntmp_cmd() only
reclaims older BDs when the number of used BDs reaches
NETC_CBDR_CLEAN_WORK (16). The software BD enables correct DMA memory
release. With this, struct ntmp_dma_buf and ntmp_free_data_mem() are no
longer needed and are removed.
3. Require callers to hold ring_lock across netc_xmit_ntmp_cmd()
netc_xmit_ntmp_cmd() releases the ring_lock before the caller finishes
consuming the response. At this point, if a concurrent thread submits
a new command, it may trigger ntmp_clean_cbdr() and free the DMA buffer
while it is still in use. Move ring_lock ownership to the caller to
ensure the response buffer cannot be reclaimed prematurely. So the
helpers ntmp_select_and_lock_cbdr() and ntmp_unlock_cbdr() are added.
These changes eliminate the DMA use-after-free condition and ensure safe
and consistent BD reclamation and DMA buffer lifecycle management. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe/eustall: Fix drm_dev_put called before stream disable in close
In xe_eu_stall_stream_close(), drm_dev_put() is called before the
stream is disabled and its resources are freed. If this drops the
last reference, the device structures could be freed while the
subsequent cleanup code still accesses them, leading to a
use-after-free.
Fix this by moving drm_dev_put() after all device accesses are
complete. This matches the ordering in xe_oa_release().
(cherry picked from commit 35aff528f7297e949e5e19c9cd7fd748cf1cf21c) |
| In the Linux kernel, the following vulnerability has been resolved:
net: ethernet: mtk_eth_soc: Fix use-after-free in metadata dst teardown
mtk_free_dev() calls metadata_dst_free() which frees the metadata_dst
with kfree() immediately, bypassing the RCU grace period.
In the RX path, skb_dst_set_noref() sets a non-refcounted pointer from
the skb to the metadata_dst. This function requires RCU read-side
protection and the dst must remain valid until all RCU readers complete.
Since metadata_dst_free() calls kfree() directly, a use-after-free can
occur if any skb still holds a noref pointer to the dst when the driver
tears it down.
Replace metadata_dst_free() with dst_release() which properly goes
through the refcount path: when the refcount drops to zero, it schedules
the actual free via call_rcu_hurry(), ensuring all RCU readers have
completed before the memory is freed. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: timer: Forcibly close timer instances at closing
When snd_timer object is freed via snd_timer_free() and still pending
snd_timer_instance objects are assigned to the timer object, it tries
to unlink all instances and just set NULL to each ti->timer, then
releases the resources immediately. The problem is, however, when
there are slave timer instances that are associated with a master
instance linked to this timer: namely, those slave instances still
point to the freed timer object although the master instance is
unlinked, which may lead to user-after-free. The bug can be easily
triggered particularly when a new userspace-driven timers
(CONFIG_SND_UTIMER) is involved, since it can create and delete the
timer object via a simple file open/close, while the other
applications may keep accessing to that timer.
This patch is an attempt to paper over the problem above: now instead
of just unlinking, call snd_timer_close[_locked]() forcibly for each
pending timer instance, so that all assigned slave timer instances are
properly detached, too. Since snd_timer_close() might be called later
by the driver that created that instance, the check of
SNDRV_TIMER_IFLG_DEAD is added at the beginning, too. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: hisilicon/sec2 - prevent req used-after-free for sec
During packet transmission, if the system is under heavy load,
the hardware might complete processing the packet and free the
request memory (req) before the transmission function finishes.
If the software subsequently accesses this req, a use-after-free
error will occur. The qp_ctx memory exists throughout the packet
sending process, so replace the req with the qp_ctx. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu: Fix WARN_ON in __iommu_group_set_domain_nofail() due to reset
In __iommu_group_set_domain_internal(), concurrent domain attachments are
rejected when any device in the group is recovering. This is necessary to
fence concurrent attachments to a multi-device group where devices might
share the same RID due to PCI DMA alias quirks, but triggers the WARN_ON in
__iommu_group_set_domain_nofail().
Other IOMMU_SET_DOMAIN_MUST_SUCCEED callers in detach/teardown paths, such
as __iommu_group_set_core_domain and __iommu_release_dma_ownership, should
not be rejected, as the domain would be freed anyway in these nofail paths
while group->domain is still pointing to it. So pci_dev_reset_iommu_done()
could trigger a UAF when re-attaching group->domain.
Honor the IOMMU_SET_DOMAIN_MUST_SUCCEED flag, allowing the callers through
the group->recovery_cnt fence, so as to update the group->domain pointer.
Instead add a gdev->blocked check in the device iteration loop, to prevent
any concurrent per-device detachment. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix NULL pointer dereference in bpf_sk_storage_clone and diag paths
bpf_selem_unlink_nofail() sets SDATA(selem)->smap to NULL before
removing the selem from the storage hlist. A concurrent RCU reader in
bpf_sk_storage_clone() can observe the selem still on the list with
smap already NULL, causing a NULL pointer dereference.
general protection fault, probably for non-canonical address 0xdffffc000000000a:
KASAN: null-ptr-deref in range [0x0000000000000050-0x0000000000000057]
RIP: 0010:bpf_sk_storage_clone+0x1cd/0xaa0 net/core/bpf_sk_storage.c:174
Call Trace:
<IRQ>
sk_clone+0xfed/0x1980 net/core/sock.c:2591
inet_csk_clone_lock+0x30/0x760 net/ipv4/inet_connection_sock.c:1222
tcp_create_openreq_child+0x35/0x2680 net/ipv4/tcp_minisocks.c:571
tcp_v4_syn_recv_sock+0x123/0xf90 net/ipv4/tcp_ipv4.c:1729
tcp_check_req+0x8e1/0x2580 include/net/tcp.h:855
tcp_v4_rcv+0x1845/0x3b80 net/ipv4/tcp_ipv4.c:2347
Add a NULL check for smap in bpf_sk_storage_clone().
bpf_sk_storage_diag_put_all() has the same issue. Add a NULL check
and pass the validated smap directly to diag_get(), which is refactored
to take smap as a parameter instead of reading it internally.
bpf_sk_storage_diag_put() uses diag->maps[i] which is always valid
under its refcount, so diag->maps[i] is passed directly to diag_get(). |
| Use after free in AdFilter in Google Chrome on Android prior to 149.0.7827.201 allowed a remote attacker who convinced a user to engage in specific UI gestures to execute arbitrary code via a crafted HTML page. (Chromium security severity: High) |
| Nokogiri is an open source XML and HTML library for the Ruby programming language. Prior to 1.19.4, calling Document#encoding= with an invalid encoding (e.g., a non-string, or a string containing a null byte) raises an exception, but only after freeing the document's current encoding string without replacing it. The document is left referencing freed memory, so the next call to Document#encoding reads invalid memory, which can cause a segfault or leak freed bytes into a Ruby String. Affects the CRuby (libxml2) implementation only; JRuby is not affected. This vulnerability is fixed in 1.19.4. |
| Nokogiri is an open source XML and HTML library for the Ruby programming language. Prior to 1.19.4, Nokogiri’s CRuby native extension could leave a Ruby wrapper pointing to freed memory when replacing the value of an XML attribute. If Ruby code had already accessed an attribute child node, Nokogiri::XML::Attr#value= could free the underlying native child node while the wrapper remained reachable through the document node cache. A later use of the freed child node or a Ruby GC mark could dereference an invalid pointer, causing an invalid read and a possible segfault. This vulnerability is fixed in 1.19.4. |
| Nokogiri is an open source XML and HTML library for the Ruby programming language. Prior to 1.19.4, XInclude substitution performed by Nokogiri::XML::Node#do_xinclude replaced each <xi:include> in place, freeing the include node along with its children (such as <xi:fallback> and its descendants) and any namespaces declared on them. If an application had already exposed one of those nodes or namespaces to Ruby, the corresponding Ruby object was left pointing at freed memory. Using the object could result in invalid reads or writes to memory. This vulnerability is fixed in 1.19.4. |
| Use after free in Payments in Google Chrome on Android prior to 149.0.7827.201 allowed a local attacker to potentially exploit heap corruption via physical access to the device. (Chromium security severity: High) |
| In the Linux kernel, the following vulnerability has been resolved:
gfs2: prevent NULL pointer dereference during unmount
When flushing out outstanding glock work during an unmount, gfs2_log_flush()
can be called when sdp->sd_jdesc has already been deallocated and sdp->sd_jdesc
is NULL. Commit 35264909e9d1 ("gfs2: Fix NULL pointer dereference in
gfs2_log_flush") added a check for that to gfs2_log_flush() itself, but it
missed the sdp->sd_jdesc dereference in gfs2_log_release(). Fix that. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rtlwifi: pci: fix possible use-after-free caused by unfinished irq_prepare_bcn_tasklet
The irq_prepare_bcn_tasklet is initialized in rtl_pci_init() and
scheduled when RTL_IMR_BCNINT interrupt is triggered by hardware.
But it is never killed in rtl_pci_deinit(). When the rtlwifi card
probe fails or is being detached, the ieee80211_hw is deallocated.
However, irq_prepare_bcn_tasklet may still be running or pending,
leading to use-after-free when the freed ieee80211_hw is accessed
in _rtl_pci_prepare_bcn_tasklet().
Similar to irq_tasklet, add tasklet_kill() in rtl_pci_deinit() to
ensure that irq_prepare_bcn_tasklet is properly terminated before
the ieee80211_hw is released.
The issue was identified through static analysis. |
| In the Linux kernel, the following vulnerability has been resolved:
drm: Replace old pointer to new idr
Commit 5e28b7b94408 introduced a logical error by failing to replace the
newly generated IDR pointer to old id's pointer at the correct location
within the "change handle" logic; this resulted in the issue reported by
syzbot [1].
Specifically, the new IDR object pointer is intended to replace the original
id's pointer during the normal execution flow.
Additionally, an unnecessary conditional check for the ret exit path has
been removed.
[1]
!RB_EMPTY_ROOT(&prime_fpriv->dmabufs)
WARNING: drivers/gpu/drm/drm_prime.c:224 at drm_prime_destroy_file_private+0x48/0x60 drivers/gpu/drm/drm_prime.c:224, CPU#0: syz.0.17/5833
Call Trace:
drm_file_free.part.0+0x7e6/0xcc0 drivers/gpu/drm/drm_file.c:269
drm_file_free drivers/gpu/drm/drm_file.c:237 [inline]
drm_close_helper.isra.0+0x186/0x200 drivers/gpu/drm/drm_file.c:290
drm_release+0x1ab/0x360 drivers/gpu/drm/drm_file.c:438 |
| Use after free in WebGL in Google Chrome on Android prior to 149.0.7827.197 allowed a remote attacker to potentially perform a sandbox escape via a crafted HTML page. (Chromium security severity: Critical) |
