| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| The OpenStation: Desktop Windows, Dock & Virtual Desktops for WP Admin plugin for WordPress is vulnerable to authorization bypass in all versions up to, and including, 1.1.16. This is due to the plugin not properly verifying that a user is authorized to perform an action. This makes it possible for authenticated attackers, with subscriber-level access and above, to modify arbitrary other users' placement rows (position, sort order, parent folder, and meta) and read serialized metadata — including title, permalink, and post status — of the entities those orphaned placements reference. Exploitation requires at least one orphaned placement to exist — a state produced naturally by the plugin's own trash cascade, which marks a parent folder as trashed while leaving child placements' parent_id intact — and the attacker must first self-enable OpenStation via the save-openstation AJAX endpoint, which requires only the 'read' capability held by every default WordPress role. This was also independently found by the OpenStation team. |
| Insecure permissions in Tailscale versionCode 297862600 allows unauthorized attackers to make arbitrary changes to another user's VPN configurations and preferences. |
| Insecure permissions in the autosave component of AppML neutriNote CE versionCode 1387 allows unauthorized attackers to write arbitrary files. |
| An issue in Forkyz versionCode 8500000 allows attackers to arbitrarily change another user's storage settings via supplying a crafted URI string. |
| Insecure permissions in ProjectMAXS MAXS Main v0.5.19 (versionCode 19) allows unauthorized attackers to arbitrarily manipulate the app's MAXS command/transport mechanism. |
| Insecure permissions in the ActivityMain component of M66B/Marcel Bokhorst NetGuard no-root firewall versionCode 2026080101/versionName 2.337 allows unauthorized attackers to arbitrarily force a device reset or Denial of Service (DoS). |
| Insecure permissions in LeafPad / Leaf Note v1.21 (versionCode 21) allows unauthorized attackers to arbitrarily read another user's note data. |
| Insecure permissions in wbpxre150 Shopping List v11.0 (versionCode 11) allows unauthorized attackers to invoke an exported component, leading to manipulation of the shopping-list data. |
| Insecure permissions in the ContentProvider component of mhss1 MyBrain v3.1.0 allows unauthorized attackers to arbitrarily read another user's private notes/tasks/diary content. |
| Insecure permissions in the ShortcutDispatchActivity component of canvoki versionCode 14 allows unauthorized attackers to arbitrarily trigger another user's configured automated actions. |
| The Apache Pulsar broker exposes a transaction administration REST API under /admin/v3/transactions. When authentication and authorization are enabled, most of the read endpoints of this API verify only that the request is authenticated and that the broker serves the requested topic or transaction coordinator. They do not check whether the caller is permitted to access the tenant, namespace or topic whose data is returned. The endpoints that modify state, which abort a transaction or scale the transaction coordinators, correctly require super-user access and are not affected.
As a result, any authenticated user, including one that has been granted no permissions, can read transaction coordinator and transaction information belonging to other tenants. This includes the list of transaction coordinators with the broker service URLs that serve them, transaction coordinator statistics and internal statistics, transaction metadata including the names of the topics and subscriptions a transaction involves and the principal that opened it, the list of long-running transactions on a transaction coordinator, transaction buffer and pending acknowledgement statistics and internal statistics for any topic and subscription, and whether a given message position of a subscription is currently held in a pending transactional acknowledgement.
The disclosure of transaction metadata and statistics can only occur when transaction support is enabled in the broker (transactionCoordinatorEnabled, which is disabled by default). When transaction support is disabled, these endpoints return no transaction data; the only residual effect is that one endpoint's error response can reveal whether a named topic exists in another tenant.
The impact is limited to disclosure of transaction-related metadata and statistics across tenant boundaries. The issue does not allow reading message contents, modifying or aborting transactions, or changing any configuration.
This issue affects Apache Pulsar versions from 2.8.0 before 4.0.14 and from 4.1.0 before 4.2.5.
- 4.0.x version users should upgrade to at least 4.0.14.
- 4.1.x and 4.2.x version users should upgrade to at least 4.2.5.
Users operating versions prior to those listed above should upgrade to the aforementioned patched versions or newer versions.
The currently supported Apache Pulsar release lines are 4.0.x and 5.0.x. The supported versions schedule is available at https://pulsar.apache.org/contribute/release-policy/.
Users who cannot upgrade immediately and do not use Pulsar transactions should keep transaction support disabled. Where transactions are required, restricting network access to the broker's admin HTTP endpoints to trusted administrative clients reduces the exposure. |
| The Apache Pulsar WebSocket service allows a WebSocket consumer to configure a dead letter policy through query parameters of the consumer endpoint, including the deadLetterTopic parameter that names the topic to which messages are written after the maximum number of redeliveries is exceeded. When authorization is enabled, the WebSocket service checks only that the connecting user holds the CONSUME permission on the subscribed topic. It does not check whether the user holds the PRODUCE permission on the topic named in deadLetterTopic. The dead letter messages are then written by the WebSocket service using its own broker client identity rather than the identity of the connecting user.
As a result, an authenticated user who holds the CONSUME permission on at least one topic can cause messages to be written to a topic of their choosing in any existing namespace, including namespaces belonging to other tenants, provided the role used by the WebSocket service to connect to the brokers is authorized to produce to that topic and the topic accepts a producer that registers no schema. The dead letter producer created by the WebSocket service registers no schema, so it is rejected when the target topic has a schema and schema validation is enforced for that topic or its namespace; this setting is not enabled by default. The same user is refused when attempting to produce to that topic directly. Where automatic topic creation is enabled, which is the default, the named topic is created if it does not already exist. The issue can only be triggered when the WebSocket service is enabled, either in the broker (webSocketServiceEnabled, which is disabled by default) or as a standalone WebSocket proxy.
The impact is unauthorized injection of messages into topics the user is not permitted to produce to. The user can determine the content of the injected messages when they also control the messages on the subscribed topic. The issue does not allow reading, modifying or deleting existing messages in the target topic. Injected messages carry the dead letter message properties and a dead letter producer name, so they can be distinguished from messages produced normally; however, the values of these properties are not authenticated and should not be relied upon to establish the origin of a message. Whether an injected message has further consequences depends on how the applications consuming the target topic process it. Repeated injection also consumes storage and backlog capacity in the target namespace.
This issue affects Apache Pulsar versions from 2.3.0 before 4.0.14 and from 4.1.0 before 4.2.5.
- 4.0.x version users should upgrade to at least 4.0.14.
- 4.1.x and 4.2.x version users should upgrade to at least 4.2.5.
Users operating versions prior to those listed above should upgrade to the aforementioned patched versions or newer versions.
The currently supported Apache Pulsar release lines are 4.0.x and 5.0.x. The supported versions schedule is available at https://pulsar.apache.org/contribute/release-policy/.
Users who cannot upgrade immediately and do not require the WebSocket service should disable it. Where the WebSocket service is required, restricting network access to it and limiting the permissions granted to the role the WebSocket service uses to connect to the brokers to the namespaces WebSocket clients are intended to access reduces the exposure. |
| The Pulsar broker serves two schema commands on its binary protocol: GetSchema, which returns the schema registered for a topic, and GetOrCreateSchema, which registers a new schema version for an existing topic. The broker handled both commands after checking only that the client connection was authenticated. Unlike the broker's other topic commands, such as those for creating producers and consumers or for looking up topics, these two commands did not check whether the authenticated client was authorized for the target topic. The Pulsar REST API endpoints for schemas were not affected.
An authenticated client without any permission on the target topic, namespace or tenant could use these commands to:
- read the schema registered for a topic in another namespace or tenant, disclosing the schema definition such as record field names and types. Message payloads are not disclosed.
- register a new schema version on an existing topic in another namespace or tenant. The topic's schema compatibility and schema auto-update policies still apply. The issue does not allow message data to be read or modified, but a registered schema version can cause legitimate producers and consumers of that topic to fail with schema incompatibility errors until the schema is corrected by an administrator.
The standard Pulsar client performs an authorized topic lookup before it sends these commands, so the missing check could not be observed when testing with the standard client. A client that implements the binary protocol directly is not required to perform that lookup first.
This issue is relevant only to deployments that have authentication and authorization enabled. The GetSchema command is affected from Apache Pulsar 2.2.0, and the GetOrCreateSchema command from Apache Pulsar 2.5.0. After the fix, the broker requires the lookup permission on the topic for GetSchema and the produce permission on the topic for GetOrCreateSchema. This impact analysis assumes that Pulsar has been configured with the default authorization provider. For custom authorization providers, the impact could be slightly different.
This issue affects Apache Pulsar versions from 2.2.0 before 4.0.14, from 4.1.0 through 4.1.3, and from 4.2.0 before 4.2.5.
- 4.0.x version users should upgrade to at least 4.0.14.
- 4.1.x and 4.2.x version users should upgrade to at least 4.2.5.
Users operating versions prior to those listed above should upgrade to the aforementioned patched versions or newer versions.
The currently supported Apache Pulsar release lines are 4.0.x and 5.0.x. The supported versions schedule is available at https://pulsar.apache.org/contribute/release-policy/. |
| The Ak Framework plugin for WordPress, included in the Newsy - Viral News & Magazine WordPress Theme, is vulnerable to Privilege Escalation in all versions up to, and including, 2.9.8. This is due to missing capability checks in the ajax_refresh_nonce and ak_admin_ajax handlers before passing attacker-controlled option names and values to update_option(). This makes it possible for unauthenticated attackers to update arbitrary WordPress options including users_can_register and default_role to escalate privileges to administrator by enabling user registration with administrator as the default role. |
| Apache Pulsar's MultiRolesTokenAuthorizationProvider authorizes a client with all roles listed in a claim of its JSON Web Token (JWT). The provider is intended for use with token authentication, which verifies the token before authorization. The provider did not verify the token itself: it parsed the token's claims with the signature removed and trusted that authentication had already checked it.
When authentication and authorization are enabled with a non-empty anonymousUserRole setting, some HTTP requests whose credentials fail authentication are not rejected, but are handled as requests of the anonymous user role. For the broker's HTTP endpoints, such as the admin REST API, this fallback applies to requests that do not name an authentication method and requires strictAuthMethod to be false (the default) where that setting is available. For the WebSocket API, failed credentials can also fall back to the anonymous user role; this path does not enforce strictAuthMethod. The authentication data kept for such a request still contained the request's Authorization header. MultiRolesTokenAuthorizationProvider then read the bearer token from that header without verifying its signature and authorized the request with the roles in the token's role claim.
As a result, in deployments that use MultiRolesTokenAuthorizationProvider together with a non-empty anonymousUserRole and that permit this fallback, an unauthenticated client can send an HTTP request, for example to the admin REST API or the WebSocket API, with a forged or unsigned token that lists arbitrary roles, and be authorized with those roles. The impact can include super-user access when the token lists a role configured in superUserRoles, allowing the client to read and change tenants, namespaces, topics, permissions and broker configuration. No valid credentials are required.
Deployments are not affected if they use the default authorization provider (PulsarAuthorizationProvider) or another authorization provider, or if anonymousUserRole is not set (the default). Requests that authenticate successfully with a valid token are not affected, because the token that MultiRolesTokenAuthorizationProvider reads is the token that authentication verified. Connections that use the Pulsar binary protocol are not affected by this issue, because the broker does not keep client authentication data for connections that it assigns to the anonymous user role.
In fixed versions, MultiRolesTokenAuthorizationProvider obtains roles only from tokens that the configured token authentication provider has verified, using its configured keys and validation settings. Broker HTTP requests that are assigned to the anonymous user role are authorized only as that role, and invalid tokens cannot supply additional roles to WebSocket requests. The broker fails to start if MultiRolesTokenAuthorizationProvider is configured with authorization enabled but without a token authentication provider.
This issue affects Apache Pulsar versions from 2.8.1 before 4.0.14 and from 4.1.0 before 4.2.5.
- 4.0.x version users should upgrade to at least 4.0.14.
- 4.1.x and 4.2.x version users should upgrade to at least 4.2.5.
Users operating versions prior to those listed above should upgrade to the aforementioned patched versions or newer versions.
The currently supported Apache Pulsar release lines are 4.0.x and 5.0.x. The supported versions schedule is available at https://pulsar.apache.org/contribute/release-policy/.
Users who cannot upgrade immediately can remove the anonymousUserRole setting from the broker and WebSocket service configurations, or restrict network access to the HTTP endpoints of these services to trusted clients. |
| Allocation of Resources Without Limits or Throttling vulnerability in esaml_binding in dropbox esaml allows an unauthenticated attacker to exhaust the Erlang VM atom table and crash the node via a crafted SAMLResponse.
esaml_binding:decode_response/2 parses the decoded SAMLResponse with xmerl_scan:string/2, which interns every element name, attribute name, and namespace prefix it reads as a permanent atom. The SAML consume (ACS) and single-logout endpoints call it on unauthenticated requests before any signature check, so one well-formed document with thousands of distinct names mints thousands of atoms while staying inside the 128 KB request body limit. Atoms are never reclaimed and the VM caps the atom table at about one million entries, so a few dozen requests abort the node.
This issue affects esaml: from 0.1.0 onward. |
| WarehousePG (WHPG) 6.27.1 through 6.27.6 and 7.2.1 through 7.6.0 are affected by a missing authorization vulnerability (CWE-862) in the built-in cluster expansion functions gp_expand_lock_catalog() and gp_expand_bump_version(). Any authenticated database role can run them, and neither checks privileges. A low-privileged user can call gp_expand_lock_catalog() inside an open transaction to block all catalog changes across the cluster for every user, superusers included, until that transaction ends, which in practice requires a superuser to terminate the session. Blocked changes include DDL, temporary table creation, GRANT and CREATE ROLE. The same user can call gp_expand_bump_version() repeatedly. Each call disconnects sessions that hold temporary tables, with a FATAL error on their next catalog change, and makes every other session rebuild its segment connections. |
| WarehousePG (WHPG) 7.2.1 through 7.6.0 is affected by a missing authorization vulnerability (CWE-862) in the built-in function gp_log_backend_memory_contexts(). Any authenticated database role can run this function without a GRANT. It also gets around the superuser restriction that PostgreSQL places on the underlying pg_log_backend_memory_contexts() function. A low-privileged user can force the segment backends of any other session, superuser sessions included, to write their memory context details to the segment server logs, which the attacker cannot read. Those details can include query text from other users' cached plans, and the call can be repeated to generate large amounts of log output. WarehousePG 6.x is not affected. |
| The Independent Analytics Pro plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'utm_campaign' parameter in all versions up to, and including, 2.15.5 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. Exploitation requires the Independent Analytics Pro build to be active, as the free build nulls campaign parameters; additionally, the attacker must first visit a frontend page to obtain a server-signed payload that can be replayed with a crafted utm_campaign value against the unauthenticated /iawp/search REST endpoint, since the signature check does not cover utm_* fields. |
| The JS Help Desk – AI-Powered Support & Ticketing System plugin for WordPress is vulnerable to arbitrary file deletion due to insufficient file path validation in the setSupportCustomImage function in all versions up to, and including, 5.0.1. This makes it possible for authenticated attackers, with administrator-level access and above, to delete arbitrary files on the server, which can easily lead to remote code execution when the right file is deleted (such as wp-config.php). Exploitation requires a two-step sequence: an administrator first saves a traversal-crafted value in the support_custom_img configuration field, then triggers deletion by uploading a new support custom image, at which point setSupportCustomImage() resolves and deletes the attacker-controlled path. |
