| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A flaw was found in OpenLDAP in versions before 2.4.56. This flaw allows an attacker who sends a malicious packet processed by OpenLDAP to force a failed assertion in csnNormalize23(). The highest threat from this vulnerability is to system availability. |
| A flaw was found in OpenLDAP. This flaw allows an attacker who can send a malicious packet to be processed by OpenLDAP’s slapd server, to trigger an assertion failure. The highest threat from this vulnerability is to system availability. |
| Gitoxide gix-pack before 0.75.0 contains a denial of service vulnerability that allows malicious remotes to crash fetch operations by sending crafted thin-pack OFS_DELTA entries. Attackers can serve a thin pack with a REF_DELTA referencing an existing object followed by an OFS_DELTA whose base_distance exceeds pack_offset, triggering a panic in LookupRefDeltaObjectsIter that aborts the fetch process. |
| FreeRDP 3.11.0 before 3.32.1 contains a reachable assertion vulnerability in urb_isoch_transfer that allows malicious RDP servers to crash clients by sending unvalidated OutputBufferSize values. Attackers can send a TS_URB_ISOCH_TRANSFER IN-direction request with OutputBufferSize above INT32_MAX over URBDRC, triggering an assertion in libusb_udev_isoch_transfer that terminates the client. |
| RIOT is an open-source microcontroller operating system designed for Internet of Things devices and other embedded systems. From version 2023.07 through version 2026.07, nanocoap_fileserver callers in sys/net/application_layer/nanocoap/fileserver.c ignore a failure returned by _resp_init() when coap_build_reply() cannot fit a response header into the response buffer. A remote client can send a CoAP request with a sufficiently large extended token when nanocoap_token_ext is enabled, causing response initialization to fail while _get_file() or _get_directory() continues with stale response state. The path then reaches _calc_szx2() and its pdu->payload_len > reserve assertion, terminating the affected service or device task. No fixed release is available as of this review. |
| A security issue was discovered in MongoDB mongos (the sharded cluster router) where an authenticated user with readWrite privileges could crash the mongos process by crafting a specially formed aggregation pipeline. The issue leverages an internal aggregation stage that lacks proper authorization checks despite being intended for internal use, allowing a subsequent stage to be forced to execute on the router under conditions it was not designed to handle. This results in an unhandled fatal error that causes the mongos process to immediately abort, resulting in denial of service for all clients routed through the affected mongos instance. |
| FreeRDP 3.0.0 before 3.32.0 does not remove card handles when Emulate_SCardReleaseContext releases a smartcard-emulation context, so Emulate_SCardTransmit later looks up the deleted parent context and reaches a terminating WINPR_ASSERT. A malicious RDP server can crash a connecting client with smartcard emulation and redirection enabled by releasing a context, establishing another, and issuing SCardTransmit with the stale card handle. |
| ZcashFoundation Zebra 6.4.0 before 6.4.2 parses version 6 transactions carrying a pre-NU6.3 consensus branch ID, but the size computation during UnminedTx construction treats re-serialization of the Orchard bundle as infallible, so the resulting error trips an expect that aborts zebrad. Unauthenticated peers can send a single pre-handshake tx message to crash the node, and can repeat this after each restart. |
| gitoxide gix-pack before 0.75.0 contains a reachable assertion in BytesToEntriesIter::new_from_header: the pack header decoder accepts version 3, but a release-enabled assert_eq! requires version 2. A malicious remote can send a 12-byte pack header declaring version 3 to panic the client and abort the clone or fetch. |
| FreeRDP 3.0.0-beta1 before 3.32.0, when built with verbose WinPR assertions and using smartcard emulation, has a reachable assertion: the emulated SCardStatusA passes a NULL reader-name destination to scard_copy_strings. A malicious RDP server can send an SCardStatusA request with fmszReaderNamesIsNULL=1 to abort a connecting client. |
| In the Linux kernel, the following vulnerability has been resolved:
perf/x86/intel/pt: Fix stop/start with no update
If pt_event_stop() is called without PERF_EF_UPDATE flag, then
perf_aux_output_end() is not called. A subsequent call to pt_event_start()
will call perf_aux_output_begin() again which violates the rule against
nesting and triggers a WARNING in perf_aux_output_begin().
Originally, pt_event_stop() was never called without PERF_EF_UPDATE,
because the only code paths to do so are from event overflow, and Intel PT
does not do that.
However the introduction of group throttling by commit 9734e25fbf5ae
("perf: Fix the throttle logic for a group") meant that an Intel PT event
could be throttled if it was part of a group. Throttling calls PMU
->stop() / ->start() callbacks without flags.
An example is when AUX area sampling is used. The following commands
hit the issue:
echo 10000 > /proc/sys/kernel/perf_event_max_sample_rate
perf record -F32000 --aux-sample -e '{intel_pt//u,cycles:u}' \
-- bash -c 'for i in `seq 1 100000` ; do true ; done'
Use PERF_HES_UPTODATE to track whether perf_aux_output_begin() and
perf_aux_output_end() are balanced. A cleared PERF_HES_UPTODATE bit
indicates that an AUX output context is still open.
Amend pt_event_start() / pt_event_stop() accordingly so that begin/end
stay balanced:
- In non-snapshot mode, stop() always closes the buffer (the buffer may
have run out of space, and that accounting is done by the update), so
a following start() opens a fresh one as before.
- In snapshot/overwrite mode, stop() without PERF_EF_UPDATE leaves the
buffer open so that pt_event_snapshot_aux() can still copy from it,
and start() then only re-enables tracing instead of calling
perf_aux_output_begin() again.
Note that pt_event_del() calls pt_event_stop() with PERF_EF_UPDATE flag set
(as is required by the documentation), so a final call to
perf_aux_output_end() is assured. |
| Navigating to a certain URL on the switch’s web server causes the switch to reboot. This can be automated using a tool like curl to create DoS conditions where the switch constantly reboots. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe/shrinker: Take a runtime PM ref before shrinking non-system memory
__xe_shrinker_walk() walks the SYSTEM and TT LRUs without a runtime PM
reference. Shrinking a bo outside system memory invalidates its GPU
mappings, which needs the device resumed, so while it is runtime
suspended the page table zap trips an assert and the TLB invalidation
returns -ENODEV:
WARNING: drivers/gpu/drm/xe/xe_bo.c:770 at xe_bo_move_notify+0x1fc/0x450 [xe]
xe_bo_shrink+0x20f/0x2b0 [xe]
__xe_shrinker_walk+0x174/0x410 [xe]
xe_shrinker_scan+0x10c/0x1e0 [xe]
do_shrink_slab+0x176/0x7e0
drop_caches_sysctl_handler+0x9c/0xf0
Take a reference before walking a memory type other than XE_PL_SYSTEM
and stop there if it cannot be acquired. Reuse the shrinker's existing
acquire path, which resumes the device directly where reclaim allows
that and otherwise queues the PM worker for a later scan. Stop the walk
once the scan target is met, so a satisfied scan does not wake the
device. System memory is still reclaimed while the device is suspended.
Gate this on xe_device_is_l2_flush_optimized(), the same condition under
which xe_bo_trigger_rebind() issues the invalidation for a non-fault-mode
vm, so reclaim is unaffected elsewhere. The System CCS copy already has
its own reference in xe_bo_shrink().
Only a non-fault-mode vm can reach this, since a fault-mode vm requires
LR mode and that holds a runtime PM reference for the vm's lifetime.
Reproduced with igt@xe_madvise@dontneed-before-exec while the GPU is
runtime suspended.
v2: simplify needs_rpm check. (Matt)
retarget Fixes tag since the issue occurs with the non-fault-mode
path added by 4e7ebff69aed.
v3: handle this in xe_shrinker.c instead of xe_bo.c (Thomas)
v4: stop the walk once the scan target is met. (Sashiko)
v5: rebase on the freed page accounting fix. (Sashiko)
v6: reuse the shrinker acquire path so runtime pm can be resumed
directly instead of always queueing a worker. (Thomas)
v7: replace xe_pm_runtime_put() with xe_shrinker_runtime_pm_put(). (Thomas)
(cherry picked from commit 628f92b28bf4c371c10207daf6fc4caee0c0db2e) |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: don't allow injecting frames wider than the chanctx
Frames injected on a monitor interface can carry a radiotap
field requesting a bandwidth, which mac80211 passes down to
the driver regardless of the the actual operational bandwidth.
If the bandwidth requested is too wide, that triggers a warning
in hwsim:
WARN_ON(hwsim_get_chanwidth(bw) > hwsim_get_chanwidth(confbw))
Drop such frames entirely instead since they cannot be sent. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: unlist vifs when their netdev is unregistered
mac80211 only removes vifs from the local->interfaces list when
an interface is removed via ieee80211_if_remove(), before it
unregisters the netdev. However, it's possible for a netdev to
be unregistered without going through that: When the netns that
holds the wiphy is destroyed, the wiphy is supposed to move to
the init_ns, but that can run into allocation failures.
Then, mac80211 has an interface listed that doesn't exist, and
will eventually hit
BUG: failure at net/wireless/core.h:141/wiphy_to_rdev()!
...
_cfg80211_unregister_wdev+0x24/0x36a [cfg80211]
cfg80211_unregister_wdev+0x15/0x1d [cfg80211]
ieee80211_remove_interfaces+0x1ff/0x257 [mac80211]
ieee80211_unregister_hw+0x73/0x1d1 [mac80211]
mac80211_hwsim_del_radio+0x114/0x166 [mac80211_hwsim]
Remove the interface from the list in ->ndo_uninit if it's still
around to avoid this. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: cfg80211: don't filter by BSS type when removing stale entries
When an assoc AP switches to a channel that already has a BSS entry,
cfg80211_update_assoc_bss_entry() removes that entry before rehashing
the real one, since the two would otherwise collide in the BSS rbtree.
The lookup for that entry also required it to match the connection's BSS
type, so an entry advertising e.g. the IBSS capability bit was left in
place, and the following cfg80211_rehash_bss() then ran into it:
WARN_ON(!cmp)
Changing the type shouldn't really happen, but can be triggered by a
rogue AP/device, so drop the check and remove any entries matching
the comparison. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: cfg80211: only group hidden BSSes with beacon entries
When a probe response for an unknown BSS comes in, __cfg80211_bss_update()
looks for an existing entry with the same BSSID and a hidden (zero-length
or NUL-filled) SSID, and if it finds one it groups them, using the beacon
IEs from the existing entry.
But that could find another entry without a beacon, if it was also from a
probe response (with SSID), so there's a group without beacon elements.
If a beacon with a hidden SSID for that BSSID arrives later,
cfg80211_combine_bsses() goes looking for the probe response entries that
belong to it - i.e. entries with the same BSSID and channel that have no
beacon IEs - and finds those two. They are already grouped with each
other, so it hits its
WARN_ON_ONCE(bss->pub.hidden_beacon_bss)
WARN_ON_ONCE(!list_empty(&bss->hidden_list))
which are there because an entry without beacon elements is not supposed
to be part of a group yet.
Only combine entries when a beacon was already received, ones that are
kept separate will be combined when a beacon arrives. |
| A reachable assertion in the illumos bhyve instruction emulator allows a guest to panic the host. When emulating a REP-prefixed MOVS or STOS instruction that accesses guest MMIO, vie_emulate_movs() and vie_emulate_stos() in usr/src/uts/intel/io/vmm/vmm_instruction_emul.c do not clear the VIES_REPEAT status flag on the final iteration. For MMIO regions emulated in the kernel (the local APIC, I/O APIC and HPET), the stale flag causes a VERIFY assertion in vie_advance_pc() to fail, and the host panics. A privileged user within a guest VM can issue a REP MOVS or REP STOS instruction against the local APIC page to cause a denial of service of the host and every other guest running on it. The flaw has existed since 2020 (illumos-gate commit e0c0d44e), and affects any illumos distribution prior to illumos-gate commit 696ecf8d. |
| named in ISC BIND 9.x before 9.9.7-P2 and 9.10.x before 9.10.2-P3 allows remote attackers to cause a denial of service (REQUIRE assertion failure and daemon exit) via TKEY queries. |
| Open5GS through 2.8.0 contains a reachable assertion vulnerability in mme_gn_handle_sgsn_context_request() that allows remote unauthenticated attackers to crash the MME via malformed SGSN Address IEs. Attackers sending GTPv1-C traffic from a configured SGSN address with a known UE IMSI or P-TMSI can supply an invalid address length to terminate open5gs-mmed, denying service to all subscribers. |
