| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Use after free in Remote Desktop Gateway Service allows an authorized attacker to execute code locally. |
| Use after free in Microsoft Office PowerPoint allows an unauthorized attacker to execute code over a network. |
| Server-side request forgery (ssrf) in Microsoft 365 Agents SDK allows an authorized attacker to disclose information over a network. |
| Out-of-bounds read in Windows DNS allows an unauthorized attacker to disclose information over a network. |
| Authorization bypass through user-controlled key in Microsoft MCP Gateway allows an authorized attacker to elevate privileges over a network. |
| Use after free in Microsoft Office Word allows an unauthorized attacker to execute code over a network. |
| Cross-site request forgery (csrf) in ASP.NET Core allows an unauthorized attacker to elevate privileges over a network. |
| Deserialization of untrusted data in Microsoft Office SharePoint allows an authorized attacker to execute code over a network. |
| Missing authorization in Microsoft Office SharePoint allows an authorized attacker to elevate privileges over an adjacent network. |
| Deserialization of untrusted data in Microsoft Office SharePoint allows an authorized attacker to execute code over a network. |
| Exposure of sensitive information to an unauthorized actor in Microsoft Entra Private Network Connector allows an authorized attacker to disclose information locally. |
| Improper neutralization of special elements used in an os command ('os command injection') in Azure CLI allows an authorized attacker to execute code over a network. |
| Improper neutralization of input during web page generation ('cross-site scripting') in Microsoft Office SharePoint allows an authorized attacker to perform spoofing over a network. |
| In the Linux kernel, the following vulnerability has been resolved:
net: skbuff: propagate shared-frag marker in skb_zerocopy()
skb_zerocopy() moves frag descriptors from @from into @to and takes a
reference on each frag, but it does not copy skb_shinfo(from)->flags into
skb_shinfo(to)->flags. A destination skb holding the same page-cache
backed frags as the source therefore reports skb_has_shared_frag() as
false.
That breaks the invariant relied on by later in-place writers. ESP input
checks skb_has_shared_frag() before deciding whether an uncloned
nonlinear skb can skip skb_cow_data(); with the marker lost, an skb that
skb_zerocopy() built for nfnetlink_queue or for an openvswitch upcall is
decrypted in place, letting an unprivileged user write into the page
cache of a root-owned read-only file.
Propagate SKBFL_SHARED_FRAG when frag descriptors are copied, as done for
the other frag-transfer helpers. |
| Incorrect authorization in Microsoft Office SharePoint allows an authorized attacker to disclose information over a network. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: conntrack: tcp: use UNACK timeout for non-closing RST packets
Commit be0502a3f2e9 ("netfilter: conntrack: tcp: only close if RST
matches exact sequence") keeps an established conntrack entry in
ESTABLISHED when an in-window RST does not match the expected sequence
number exactly, so the endpoint can validate the RST with a challenge
ACK.
The timeout selection nevertheless uses the CLOSE timeout for every RST
packet. The bug is that timeout selection is based on the packet type,
not on the state transition result: even when RST validation keeps
new_state in ESTABLISHED, the timeout is still forced to
TCP_CONNTRACK_CLOSE.
Linux TCP independently rate limits challenge ACKs per socket. A second
non-exact RST can therefore arrive after the first challenge ACK has
restored the timeout but before the rate limit expires. The second RST
lowers the timeout to 10 seconds again while the endpoint suppresses the
second challenge ACK, allowing the conntrack entry to expire while both
TCP endpoints remain established.
Using the ESTABLISHED timeout for such RSTs would avoid this short
expiration window, but it could also retain stale entries for the
five-day default because conntrack cannot reliably match the endpoint's
exact TCP state.
Use the UNACK timeout for RST packets that leave the conntrack entry in
TCP_CONNTRACK_ESTABLISHED. Exact-match RSTs and accepted RST packet
trains still fall through to timeouts[new_state], which preserves the
CLOSE timeout when conntrack accepts the RST as closing the flow.
This avoids the aggressive 10-second expiration window for non-exact
RSTs while preserving the short timeout for RSTs that conntrack accepts
as closing the flow. |
| Improper neutralization of input during web page generation ('cross-site scripting') in Microsoft Office SharePoint allows an authorized attacker to perform spoofing over a network. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: sch_teql: fix use-after-free on lower qdisc drop
The issue: teql_master_xmit() tests the slave's ndo_start_xmit() return
value against NETDEV_TX_OK alone. A slave that consumes the skb but
returns an error code (rc < NET_XMIT_MASK, e.g. NET_XMIT_DROP) is treated
as if the skb were still owned, so the loop restores skb->dev and calls
__skb_pull() on it. A VLAN slave returns the result of dev_queue_xmit()
from its ndo_start_xmit() (propagated since cbbef5e18307), and when the
lower qdisc drops the packet that value is NET_XMIT_DROP after the skb
has been freed, giving a use-after-free in teql_master_xmit().
The Fix: test for consumption with dev_xmit_complete(), which accepts
NETDEV_TX_OK and every rc < NET_XMIT_MASK, matching other callers that
need to distinguish consumed results from busy. Only NETDEV_TX_OK keeps
the packet counted in tx_packets/tx_bytes and advances the slave; a
consumed result that is neither a success nor NET_XMIT_CN ends the
attempt and is charged to tx_dropped, so lower-qdisc drops are no longer
reported as good transmits. NET_XMIT_CN is counted like success because
it can accompany acceptance of the current packet: pfifo_head_drop drops
the old head, enqueues the current skb and returns NET_XMIT_CN.
Conditions to recreate the bug:
With CONFIG_NET_SCH_TEQL,
CONFIG_VLAN_8021Q and CONFIG_DUMMY enabled, add lkrdummy0 (dummy) and
lkrvlan0 (VLAN id 37 on lkrdummy0); set a pfifo limit 0 root on lkrdummy0
and a teql0 root on lkrvlan0; bring teql0 up with an address and send one
UDP packet to it. The VLAN xmit returns NET_XMIT_DROP from the lower
qdisc while holding a freed skb. |
| Use after free in Windows Projected File System Filter Driver allows an authorized attacker to elevate privileges locally. |
| In the Linux kernel, the following vulnerability has been resolved:
tun: Require CAP_NET_ADMIN to attach to an ownerless device
Twenty years ago I made creating a tuntap device require CAP_NET_ADMIN
in commit ca6bb5d7ab22 ("[NET]: Require CAP_NET_ADMIN to create tuntap
devices.")
The idea was to allow the permissions on /dev/net/tun to be relaxed to
0666 and thus allow owners of tun devices assigned with TUNSETOWNER to
actually open it and get at their devices.
What we missed at the time was that persistent devices with *no* owner
were already essentially world-consumable, and anyone who could open
the device node could also attach to those.
Even then, using persistent devices with no explicitly set owner — on
the (false) presumption that CAP_NET_ADMIN would be required to open
them — wasn't an egregious userspace bug. There are cases where it does
make sense to separate the creation/configuration of the netdevice, from
the process which shovels packets into it.
Since then, TUNSETGROUP was added a year later in commit 8c644623fe7e
("[NET]: Allow group ownership of TUN/TAP devices."). Its commit message
noted that if both uid and gid are set, both have to match (in itself a
bizarre choice) — but still not that with *neither* set, no permission
at all was required.
Then in 2012 commit c8d68e6be1c3 ("tuntap: multiqueue support") allowed
new queues to be attached to a device from the moment of its creation,
with no way for userspace to close the race between creation and a
subsequent TUNSET{OWNER,GROUP}.
In 2024, commit 3ca459eaba1bf ("tun: fix group permission check") tried
to fix things to be saner: only require the user *or* the group to
match, in line with standard POSIX permissions, and require
CAP_NET_ADMIN if neither the user nor group authorised the access
(although it put the CAP_NET_ADMIN check first, and would wrongly have
reported the capability as having been used even when it was not).
That fix was reverted in commit a70c7b3cbc06 ("tun: revert fix group
permission check") due to allegedly causing a regression in an selinux
test suite which *expected* the attachment to succeed when authorised
by none of user, group, nor CAP_NET_ADMIN:
https://lore.kernel.org/netdev/CAFqZXNtkCBT4f+PwyVRmQGoT3p1eVa01fCG_aNtpt6dakXncUg@mail.gmail.com/
We should not break UAPI. But we don't have to consider an selinux test
case which deliberately exercises a security flaw to be UAPI worth
preserving either. To which end, I have fixed it in selinux-testsuite
commit b2f894f0016b ("tests/tun_tap: set an owner on the device for the
relabel tests").
So: fix the lack of CAP_NET_ADMIN check on devices which *haven't* been
assigned an owner or group, while leaving the weird tun ownership model
as it was (user *and* group have to match, if both are set). If someone
still wants to fix the latter (which wasn't actually the reason the
previous attempt was reverted), they can do it under separate cover.
Permit attaching to an existing device only if an owner and/or group was
set and the caller matches all that were set, or if the caller has
CAP_NET_ADMIN. The only behavioural change is that a device with no
owner or group now requires CAP_NET_ADMIN to attach — precisely the
loophole we want to close.
And put the CAP_NET_ADMIN check in the right place this time. |
