| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Invalid pointer, undefined behavior in the DOM: Notifications component. This vulnerability was fixed in Firefox 158 and Thunderbird 158. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: samsung: i2s: enable op_clk in probe to balance runtime PM
The probe function puts the device into the runtime PM active state with
only the "iis" bus clock enabled, but it also sets priv->op_clk to the
parent of the RCLK_SRC mux without enabling it. The runtime PM suspend
callback disables both clocks, so the first runtime suspend after probe
disables op_clk once more than it was enabled.
On Exynos5250 Arndale both clocks resolve to the same EXYNOS_I2S_BUS gate,
so this triggers the following warning during boot:
WARNING: drivers/clk/clk.c:1270 at clk_core_disable+0xe4/0x23c, CPU#0: kworker/u8:3/45
i2s_bus already disabled
...
Workqueue: pm pm_runtime_work
Call trace:
...
clk_core_disable from clk_disable+0x28/0x34
clk_disable from i2s_runtime_suspend+0x58/0x68 [snd_soc_i2s]
i2s_runtime_suspend [snd_soc_i2s] from genpd_runtime_suspend+0xc4/0x298
genpd_runtime_suspend from __rpm_callback+0x48/0x18c
__rpm_callback from rpm_callback+0x4c/0x50
rpm_callback from rpm_suspend+0xf4/0x718
rpm_suspend from pm_runtime_work+0x9c/0xa0
...
Fix this by enabling op_clk in probe right after getting it, so the clock
state matches the runtime PM active state, and by disabling it in remove. |
| Asterisk is an open source private branch exchange and telephony toolkit. Prior to Asterisk 20.20.1, 21.12.3, 22.10.1, 23.4.1 and Certified Asterisk 20.7-cert11, 22.8-cert3, an authenticated attacker may cause a heap-use-after-free in `PJSIP TCP/SDP` handling by sending a `SIP INVITE` over a connection-oriented transport and disconnecting before Asterisk responds with the `200 OK`. So far, the crash has only been reproduced when Asterisk is built with `Address Sanitizer`, which detects the issue. `Address Sanitizer` is a development tool with significant performance overhead and, according to the maintainer, is not used in production systems. This issue is fixed in Asterisk 20.20.1, 21.12.3, 22.10.1, 23.4.1 and Certified Asterisk 20.7-cert11, 22.8-cert3. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Drop task_to_inode and inet_conn_established from lsm sleepable hooks
bpf_lsm_task_to_inode() is called under rcu_read_lock() and
bpf_lsm_inet_conn_established() is called from softirq context, so
neither hook can be used by sleepable LSM programs. |
| As part of Cisco's ongoing commitment to proactive security and product quality, Cisco has conducted a comprehensive internal security review. This review resulted in a software hardening release that addresses multiple internally discovered vulnerabilities. The vulnerabilities tracked by CVE-2026-76300 are related to improper control of a resource through its lifetime and are grouped under the Common Weakness Enumeration (CWE) CWE-664. |
| A security vulnerability has been detected in Yoosee GM8135S Camera 21.00.01.36. This impacts an unknown function of the file wpa_supplicantX.conf of the component WiFi Configuration. Such manipulation leads to improper initialization. The attack can only be initiated within the local network. This attack is characterized by high complexity. The exploitability is said to be difficult. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| OpenClaw (aka clawdbot or Moltbot) before 2026.1.29 obtains a gatewayUrl value from a query string and automatically makes a WebSocket connection without prompting, sending a token value. |
| In the Linux kernel, the following vulnerability has been resolved:
riscv: errata: select RISCV_ALTERNATIVE_EARLY for THEAD GHOSTWRITE
errata_probe_ghostwrite() only marks the CPU as vulnerable when it is
called at the RISCV_ALTERNATIVES_EARLY_BOOT stage, and the mitigation
in ghostwrite_enable_mitigation() only takes effect if the vulnerable
state was recorded before the boot alternatives are patched.
The early boot stage is only executed when CONFIG_RISCV_ALTERNATIVE_EARLY
is enabled, which currently is only selected by ERRATA_THEAD_MAE. In a
kernel built with ERRATA_THEAD_GHOSTWRITE=y but ERRATA_THEAD_MAE=n, the
early alternatives never run, so ghostwrite_state is never set to
VULNERABLE: ghostwrite_enable_mitigation() returns false, xtheadvector
remains enabled, and sysfs reports "Not affected" on a vulnerable
T-Head C9xx CPU.
Select RISCV_ALTERNATIVE_EARLY from ERRATA_THEAD_GHOSTWRITE so that the
vulnerability is detected in the early boot stage and the default
mitigation is applied. |
| In the Linux kernel, the following vulnerability has been resolved:
nvmet: use the local P2P device on metadata allocation failure
nvmet_req_alloc_p2pmem_sgls() assigns req->p2p_dev only after the data
and metadata SGL allocations succeed. If the data allocation succeeds
but the metadata allocation fails, out_free_sg passes req->p2p_dev to
pci_p2pmem_free_sgl() before that assignment has taken place.
Pass the local p2p_dev argument instead, so cleanup uses the same PCI
device as the successful data allocation. |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: stop exchanging reflink flags when exchanging mappings
When an exchange covers both files from offset 0 to i_disk_size,
xmi_can_exchange_reflink_flags() assumes every mapping moved and hands
the reflink flag over to the other file.
That assumption is wrong. A file can still own shared blocks past
i_disk_size, e.g. after EXCHANGE_RANGE_TO_EOF sets a smaller size
without unmapping anything. The flag is cleared anyway, and the next
write to such a block happens in place instead of CoW, corrupting the
other file that shares it.
Commit a23eca88448e ("xfs: fix exchange-range reflink flag clearing
issue with INO1_WRITTEN") fixed one instance of this. Rather than add
another special case, stop moving the flags.
xfs_exchmaps_ensure_reflink() already sets the flag on both inodes
before the exchange, so both just keep it.
Nothing sets CLEAR_INO{1,2}_REFLINK anymore. Intents logged by older
kernels may still carry them; recovery already masks them off, so they
stay in the log format mask and are ignored.
XFS_IOC_SWAPEXT has the same problem: it moves the reflink flag from
one inode to the other along with the extents. Just removing that is
not enough here: the exchange path flags both inodes up front in
xfs_exchmaps_ensure_reflink(), but swapext has no such step, so the
inode receiving the shared extents would be left without the flag.
Set it on both inodes instead, and make sure both have a CoW fork,
since an inode with the reflink flag is expected to have one.
The flag now stays until FALLOC_FL_UNSHARE_RANGE, xfs_scrub, or a
truncate to zero removes it. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix xattr replace when multiple xattrs are packed in the same item
If we have a btrfs_dir_item item that packs multiple xattrs and then we
replace the value of one of them (with the setxattr(2) family of syscalls)
with another value of a different size, we end up not having a fully
initialized btrfs_dir_item, resulting in a corruption that the tree
checker will detect at extent buffer writeback time.
This is because in btrfs_setxattr() when we find a btrfs_dir_item with
multiple xattrs (due to the crc32c hash of their name being the same)
we delete one of the xattr items (btrfs_dir_item) and then insert a new
one, but the deletion and insertion results in shifting existing data in
the leaf and therefore when the new value of a xattr has a different size,
the new btrfs_dir_item is placed in a leaf section that was not
initialized and we only copy the value's data and set the value's length
in the new btrfs_dir_item, without setting the name, the name's length,
the key (which must be all zeroes for xattrs), flags (BTRFS_FT_XATTR) and
transaction ID.
The following script reproduces the issue:
$ cat test.sh
#!/bin/bash
DEV=/dev/sdi
MNT=/mnt/sdi
mkfs.btrfs -f $DEV
mount $DEV $MNT
touch $MNT/testfile
# Add two xattrs that, on btrfs, have the same hash (crc32c) for their
# name and therefore are packed into the same btrfs_dir_item.
setfattr -n user.foobar -v 123 $MNT/testfile
setfattr -n user.WvG1c1Td -v qwerty $MNT/testfile
# Verify the xattrs are present.
echo "xattrs before:"
getfattr --absolute-names --dump $MNT/testfile
# Now replace the value of the foobar xattr with a significantly larger
# value.
setfattr -n user.foobar -v abcdefghijklmnopqrstuvwxyz $MNT/testfile
# Check the xattrs have the expected values.
echo "xattrs after:"
getfattr --absolute-names --dump $MNT/testfile
umount $MNT
Running it:
$ ./test.sh
(...)
xattrs before:
# file: /mnt/sdi/testfile
user.WvG1c1Td="qwerty"
user.foobar="123"
xattrs after:
# file: /mnt/sdi/testfile
user.WvG1c1Td="qwerty"
So the "user.foobar" xattr is missing and there was a transaction abort
when unmounting the fs with the following traces in dmesg:
$ dmesg
[869800.159271] BTRFS warning (device sdi): access to eb bytenr 30474240 len 16384 out of range start 16015 len 25964
[869800.159293] ------------[ cut here ]------------
[869800.159296] WARNING: fs/btrfs/extent_io.c:4408 at report_eb_range+0x44/0x60 [btrfs], CPU#8: getfattr/2605179
[869800.168961] Modules linked in: btrfs dm_thin_pool (...)
[869800.190527] CPU: 8 UID: 0 PID: 2605179 Comm: getfattr Tainted: G W 7.3.0-rc3-btrfs-next-244+ #1 PREEMPT(full)
[869800.193726] Tainted: [W]=WARN
[869800.194502] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.2-0-gea1b7a073390-prebuilt.qemu.org 04/01/2014
[869800.197576] RIP: 0010:report_eb_range+0x44/0x60 [btrfs]
[869800.198985] Code: 48 8b 7b 18 (...)
[869800.203531] RSP: 0018:ffffce4541937d58 EFLAGS: 00010246
[869800.204609] RAX: 0000000000000000 RBX: ffff8dde054b8738 RCX: 0000000000000000
[869800.206137] RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffffffffc04c92a0
[869800.207645] RBP: 0000000000003e8f R08: 0000000000000000 R09: 3fffffffffefffff
[869800.226175] R10: ffffce4541937a88 R11: 0000000000000003 R12: 000000000000656c
[869800.227594] R13: ffff8dde14be800f R14: 000000000000656c R15: 0000000000000069
[869800.229097] FS: 00007f59023bb780(0000) GS:ffff8de5788ed000(0000) knlGS:0000000000000000
[869800.231137] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[869800.232321] CR2: 0000558dc45e6a78 CR3: 0000000765b16004 CR4: 0000000000370ef0
[869800.233783] Call Trace:
[869800.234330] <TASK>
[869800.234791] read_extent_buffer+0x4d/0x100 [btrfs]
[869800.235898] btrfs_listxattr+0x199/0x240 [btrfs]
[869800.236912] vfs_listxattr+0x51/0
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
namespace: don't inherit MNT_UMOUNT in clone_mnt()
MNT_UMOUNT gets raised on a mount that umount_tree() or umount_one() has
taken out of its namespace. It's never cleared. __detach_mounts()
unhooks a mount that carries it instead of unmounting it.
disconnect_mount() lets an unmounted child stay attached only if its
parent carries it. propagate_umount() takes it as the sign that a mount
is going to be unmounted when it decides what else can be unmounted,
where a chain of locked mounts ends and where a for reparenting an
overmount.
clone_mnt() copies the flags of the source and only masks
MNT_INTERNAL_FLAGS which doesn't include MNT_UMOUNT. A mount that was
lazily unmounted but is kept alive by a file descriptor can still be
copied when its root is an nsfs or pidfs file because may_copy_tree()
accepts those before checking whether the source is mounted at all:
mount --bind /proc/self/ns/net /tmp/x
exec 3< /tmp/x
umount -l /tmp/x
mount --bind /proc/self/fd/3 /tmp/y
The mount on /tmp/y is attached to the caller's namespace with
MNT_UMOUNT already set and every copy of it inherits the flag again.
That causes a number of bugs:
- Unlink its mountpoint from a mount namespace where it isn't one.
__detach_mounts() takes it for a mount that was unmounted earlier,
unhooks it from its parent and drops the reference the namespace
holds on it. It stays in the namespace with one reference too few
and as its own parent, so it can't be unmounted through the file
descriptor anymore and the namespace never finds it again. When the
namespace goes away it's leaked and points to a freed struct
mnt_namespace that may_change_propagation() and anon_ns_root() read
on the next propagation change or mount_setattr() through the file
descriptor.
- Make it shared and unmount a peer. trace_transfers() follows the
flag from the peer into it and strips it from its peer group.
- Let a propagated umount reach it. gather_candidates() marks it with
T_UMOUNT_CANDIDATE but never puts it on the candidate list, so the
mark is never cleared and every later propagated umount skips it. If
it's the parent of a locked mount handle_locked() takes it as the
cutoff and commits the locked child that should have stayed and
disconnect_mount() leaves that child attached to it, unmounted under
a mounted parent, which is what disconnect_mount() exists to
prevent. When the namespace goes away umount_tree() visits the child
a second time. And once __detach_mounts() has made it its own parent
reparent() never finds the end of the chain of unmounted parents.
A clone is a new mount that has never been unmounted. Add MNT_UMOUNT
to MNT_INTERNAL_FLAGS so clone_mnt() never copies it. And warn when
umount_tree() reaches a mount that already has it set. |
| In the Linux kernel, the following vulnerability has been resolved:
optee: register TEE devices only once fully initialized
optee_probe() called tee_device_register() on both the client and the
supplicant device before the rest of struct optee had been initialized.
tee_device_register() calls cdev_device_add(), which does two things at
once: it creates /dev/tee0 and /dev/teepriv0, and it links the device
into the tee class so that class_find_device() can find it. From that
moment on the device is reachable both from user space via tee_open()
and from kernel space via tee_client_open_context(). The only gate in
teedev_open() is tee_device_get(), which merely checks that
teedev->desc is non-NULL, which was already set by tee_device_alloc().
Therefore, there is effectively no gate at all.
A context opened in that window can run against a struct optee where
- optee->call_queue.mutex is not initialized by optee_cq_init()
- optee->supp mutex and completions is not initialized by
optee_supp_init()
- optee->rpmb_dev_mutex is not initialized yet,
- the message argument cache is not initialized by
optee_shm_arg_cache_init()
- optee->ctx is still NULL
Any open session or invoke during this window takes uninitialized
mutexes and dereferences a NULL pointer.
Fix it by moving both tee_device_register() calls down to the point
where all of struct optee is set up.
[JW: adding fixes and cc] |
| In the Linux kernel, the following vulnerability has been resolved:
namespace: look at the topmost mount for a mount namespace file
attach_recursive_mnt() preallocates a mountpoint for the root of the
topmost mount of the source so that a mount that already sits at the
destination can be put on top of the source or on top of one of its
propagated copies.
The copies are made without CL_COPY_MNT_NS_FILE so their chain of
overmounts is shorter than the source's. It ends below the first bind
mount of a mount namespace file. So while the loop walks up the chain of
the source it remembers the mountpoint of that mount in "shorter" and
the existing mount is put there for the copies.
But the loop ends at the topmost mount without ever looking at it. If
the topmost mount is the only mount namespace file in the chain
"shorter" stays NULL and mnt_change_mountpoint() attaches the existing
mount of the copy below the root of the mount namespace file. That's a
dentry of nsfs. No path walk in the copy's mount namespace ever gets
there. The mount is gone until its parent goes and the copy that took
its place can't be unmounted synchronously because it has a child:
S bind mount of a file
N bind mount of a mount namespace file on top of S
A shared mount, B a slave of A, Q mounted on B/file
move_mount(S, A/file)
cat B/file -> the content of S instead of Q
umount B/file -> EBUSY
Look at every mount of the chain including the topmost one. |
| In the Linux kernel, the following vulnerability has been resolved:
Input: ati_remote2 - fix type confusion in device attribute handlers
Previously, the channel_mask and mode_mask attributes were registered on
the parent usb_device via sysfs_create_group(). When commit b20d6bf8014b
("Input: ati-remote2 - use driver core to instantiate device
attributes") converted the driver to let the driver core manage them via
dev_groups in struct usb_driver, the attributes moved to the bound
usb_interface devices, but the show and store callbacks were not updated
accordingly.
As a result, the callbacks still invoked to_usb_device() on a device
pointer belonging to a struct usb_interface, producing an invalid
usb_device pointer.
Use to_usb_interface() directly in the attribute handlers to obtain the
interface and its driver data. |
| In the Linux kernel, the following vulnerability has been resolved:
staging: fbtft: make dirty_lock IRQ-safe
fbtft_mkdirty() can be reached from the fbcon rendering path while
processing printk() in hardirq context. Meanwhile, dirty_lock is also
taken by fbtft_deferred_io() in workqueue context with local interrupts
enabled.
Lockdep reports a possible IRQ lock inversion involving dirty_lock and
console_owner. A hardirq can interrupt a CPU holding dirty_lock and
enter the console rendering path, which can attempt to acquire
dirty_lock again.
The following lockdep report was observed on an RK3566 system with
CONFIG_PROVE_LOCKING enabled:
WARNING: possible irq lock inversion dependency detected
swapper/2/0 just changed the state of lock:
(console_owner){-...}-{0:0}
but this lock took another, HARDIRQ-unsafe lock in the past:
(&par->dirty_lock){+.+.}-{2:2}
CPU0 CPU1
---- ----
lock(&par->dirty_lock);
local_irq_disable();
lock(console_owner);
lock(&par->dirty_lock);
<Interrupt>
lock(console_owner);
*** DEADLOCK ***
Use spin_lock_irqsave() for fbtft_mkdirty() and spin_lock_irq() for
fbtft_deferred_io(). They only access the dirty line range, so the
IRQ-off regions remain short. |
| In the Linux kernel, the following vulnerability has been resolved:
regulator: of: fill in supply names in of_regulator_bulk_get_all()
of_regulator_bulk_get_all() returns an array it allocated itself, and
fills in only the consumer of each entry. Every other way of getting a
bulk array has the supply name set, because the caller provides it, and
the core expects it to be there: regulator_bulk_enable() prints it when
a supply fails to enable, so a caller that hands such an array to it
dereferences uninitialised memory on that path.
Copy each name into the array's own allocation, right behind the
entries, so that it shares the array's lifetime and callers still have
nothing extra to free. That also retires the fixed 64 byte stack buffer
the names were assembled in, which is_supply_name() never bounded the
copy against. |
| In the Linux kernel, the following vulnerability has been resolved:
gpio: exar: initialize the ID before registering its cleanup
devm_add_action_or_reset() invokes the cleanup action immediately when
registering the action fails. gpio_exar_probe() currently stores the
allocated ID in exar_gpio only after registering the action, so that
failure makes exar_devm_ida_free() release ID 0. If the allocated ID is
nonzero, this leaks that ID and can free ID 0 belonging to another device.
Store the ID before registering the cleanup action so both the immediate
failure path and normal device teardown release the correct allocation. |
| In the Linux kernel, the following vulnerability has been resolved:
net: microchip: sparx5: clean up PSFP resources on flower setup failure
sparx5_tc_flower_psfp_setup() allocates PSFP stream gate, flow meter and
stream filter resources before adding VCAP actions. If a later step
fails, the resources allocated earlier in the function are not unwound.
Add error paths to release the stream filter, flow meter and stream gate
when setup fails after they have been acquired.
Also make sparx5_psfp_fm_add() return the acquired flow-meter id before
the existing-flow-meter early return. When an existing flow meter is
reused, sparx5_psfp_fm_get() increments its pool reference count, but the
caller previously kept psfp_fmid as 0. If a later setup step failed, the
error path could try to delete flow-meter id 0 instead of the reused flow
meter, leaving the incremented reference behind. |
| In the Linux kernel, the following vulnerability has been resolved:
macsec: initialize SecY before registering the netdevice
Creating a MACsec device with MAC offload over an LRO-capable lower
device triggers a warning in rtmsg_ifinfo_build_skb() when IPv4
forwarding is enabled by default.
register_netdevice() invokes inetdev_init(), which disables LRO and emits
a NETDEV_FEAT_CHANGE notification. This reaches macsec_fill_info() before
macsec_add_dev() initializes the SecY. key_len is still zero, so
macsec_fill_info() returns -EMSGSIZE and trips the WARN_ON in
rtmsg_ifinfo_build_skb(), even though the skb has enough space.
Even without the warning, notifications during registration can report
uninitialized SecY attributes, including the SCI. This ordering has existed
since the driver was introduced.
Initialize the SecY and apply the new-link attributes before registration.
Move MAC address inheritance into macsec_newlink() so the SCI can also be
initialized before registration-time notifications report it. Move the
per-CPU statistics and metadata destination allocation into ndo_init(),
and release partial allocations on failure. |
