| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
riscv: patch: fix handling of bpf-jit execmem addresses
Commit 8718e5a3090b ("riscv: patch: skip fixmap mapping when kernel text
is already writable") gated the core_kernel_text() branch of patch_map()
on CONFIG_STRICT_KERNEL_RWX, and explicitly left the vmalloc branch
unchanged. That branch has a separate problem.
That branch only creates a temporary writable fixmap alias when
CONFIG_STRICT_MODULE_RWX is enabled, and otherwise assumes the target is
directly writable and returns the address unchanged. That assumption no
longer holds: bpf_prog_pack_alloc calls set_memory_rox() on every pack
unconditionally in alloc_new_pack(), independently of any
CONFIG_STRICT_*_RWX option, so BPF text in the vmalloc area is read-only
regardless of what CONFIG_STRICT_MODULE_RWX says.
With CONFIG_STRICT_MODULE_RWX=n, patch_map() returns the read-only
address directly, the subsequent copy_to_kernel_nofault() takes a
page fault and returns -EFAULT. bpf_arch_text_copy() turns that into
-EINVAL, which propagates through bpf_jit_binary_pack_finalize() to the
WARN_ON() in bpf_int_jit_compile() and leaves the program un-JITed.
Note that BPF cannot be fixed the way kprobes was in
commit bdc46e507b59 ("riscv: mm: make EXECMEM_KPROBES writable without
CONFIG_STRICT_MODULE_RWX"). EXECMEM_BPF is already PAGE_KERNEL, i.e.
writable at allocation time; the read-only mapping is established
afterwards by generic code in alloc_new_pack(), which arch code cannot
influence. The only place this can be handled is patch_map().
This is the same problem that was fixed on arm64 by commit b1480ed230ac
("arm64: patching: fix handling of execmem addresses"), and the fix is
the same: CONFIG_EXECMEM is what actually tracks whether the vmalloc
area can hold executable memory that needs a temporary alias to be
written. CONFIG_BPF_JIT, CONFIG_KPROBES and CONFIG_MODULES all select
it.
Note that this is not limited to CONFIG_MODULES=n. Unlike arm64, riscv
selects CONFIG_ARCH_OPTIONAL_KERNEL_RWX, so CONFIG_STRICT_MODULE_RWX can
be disabled with CONFIG_MODULES=y as well, and the bug is reachable in
that configuration too.
The !CONFIG_MMU build is unaffected: it has its own __patch_insn_set()
and __patch_insn_write() implementations and never calls patch_map(). |
| A Floating-Point Exception (FPE) in the reframer_send_packet function (/filters/reframer.c) of GPAC Project/MP4Box before 2.5 allows attackers to cause a Denial of Service (DoS) via supplying a crafted MP4 file. |
| The guard checker in Rocq Prover does not follow recursive calls made through a fixpoint's own arguments. A fixpoint may pass itself as a higher-order argument to a second fixpoint, which then applies it to a value that is not a subterm of the structural argument. Passing the recursive function to a plain definition is rejected because the checker unfolds the definition and observes the call, but passing it to a fixpoint is accepted because higher-order recursive calls through fixpoint arguments are not tracked. This admits a type that is definitionally equal to its own negation, so self-application produces False in purely definitional code, without tactics, axioms, plugins or unsafe flags, and Print Assumptions reports the result as closed under the global context. Fixed in Rocq 9.2.0. |
| The guard checker in Rocq Prover does not recheck the recursive tree representation of an inductive type parameter after that parameter has been changed by transport. A fixpoint may apply a rewrite along an equality between types to its recursive argument, which the guard checker accepts because the inductive type is preserved, while the recursive tree recorded for the parameter is altered. A second fixpoint that calls the first inherits the altered recursive tree without verification, so a call that is not structurally decreasing is accepted as terminating. The resulting non-terminating definition proves that a natural number equals its own successor and therefore False, from which any proposition follows. The demonstration uses two axioms that follow from univalence and are consistent with the calculus of inductive constructions, so the contradiction comes from the guard check rather than from the assumptions. A fix is proposed but not merged. |
| The guard checker in Rocq Prover treats a parameter of a nested mutual fixpoint as uniform without examining calls between the different bodies of that fixpoint. find_uniform_parameters in kernel/inductive.ml inspects only self-recursive calls, so when no body calls itself the function concludes that every parameter is uniform. A parameter that grows through a cross-call from one body to another therefore keeps the subterm specification it inherited from the enclosing fixpoint, and a recursive call guarded by that specification is accepted although the argument is not structurally smaller. A non-terminating definition is admitted as structurally decreasing, which yields a term whose value equals its own successor and so a proof of False, from which any proposition follows. The proof requires no axioms, plugins or unsafe flags and Print Assumptions reports it as closed under the global context. Introduced in Coq 8.20 and fixed in Rocq 9.2.0. |
| ImageMagick before 6.9.13-58 and 7.x before 7.1.2-33 contains uncontrolled recursion in the MVG decoder that can lead to a stack overflow. Attackers can supply a crafted MVG file that, when read with specific arguments, exhausts the stack and crashes the process, causing a denial of service. |
| Crow before 1.3.4 contains an uncontrolled recursion vulnerability in crow::json::load() that allows remote unauthenticated attackers to crash the server by sending deeply nested JSON. Attackers can send a request body with thousands of nested objects to exhaust the worker thread stack, terminating the process and dropping all connections. |
| odhcpd is the DHCPv6, DHCPv4, and router-advertisement server used by OpenWrt. Prior to version 25.12, odhcpd's DHCPv6 IA handler keeps a per-message `first` lease pointer so multiple IA options in one message reuse the same Reconfigure authentication key. A DHCPv6 REQUEST from an adjacent-network client can make the first IA set `first`, then make a later same-IAID IA fail the on-link check and free that same lease, leaving `first` dangling. A following IA in the same packet allocates a new lease and copies `first->key`, producing a 16-byte heap-use-after-free read. ASan confirms the UAF; native tracing shows the packet shape can deterministically reclaim the freed lease as the destination allocation, producing a zeroed Reconfigure key copy. The validated impact is unauthenticated adjacent-network denial of service and DHCPv6 Reconfigure/ForceRenew key confusion. Arbitrary PC control is not proven for this UAF alone. This issue has been patched in version 25.12. |
| Command injection vulnerabilities exist in the affected interface of AOS-10 that could allow an authenticated remote attacker with high privileges to perform command injection. Successful exploitation could allow an attacker to execute arbitrary commands as a privileged user on the underlying operating system. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: cap ATOM command table nesting depth
Cap nesting at 32 levels with execute_depth and
return -ELOOP when exceeded. |
| pupnp is an SDK for development of UPnP device and control point applications. Prior to 2.0.0, multiple ixml DOM traversal functions process deeply nested XML with unbounded recursion. The iterative XML parser accepts the document, but ixmlPrintDomTreeRecursive in ixml/src/ixml.c and ixmlNode_getElementsByTagNameRecursive, ixmlNode_getElementsByTagNameNSRecursive, ixmlNode_cloneNodeTreeRecursive, and ixmlNode_isAncestor in ixml/src/node.c recurse over firstChild and nextSibling links. An unauthenticated peer on the local network can supply deeply nested XML through a SOAP request, exhaust a service thread's stack, and crash the UPnP service. This is an incomplete-fix case for CVE-2021-28302 because its remediation converted ixmlNode_free but left these traversal paths recursive. This issue is fixed in 2.0.0. |
| Avahi is a system which facilitates service discovery on a local network via the mDNS/DNS-SD protocol suite. In versions 0.9rc2 and below, avahi-daemon can be crashed via a segmentation fault by sending an unsolicited mDNS response containing a recursive CNAME record, where the alias and canonical name point to the same domain (e.g., "h.local" as a CNAME for "h.local"). This causes unbounded recursion in the lookup_handle_cname function, leading to stack exhaustion. The vulnerability affects record browsers where AVAHI_LOOKUP_USE_MULTICAST is set explicitly, which includes record browsers created by resolvers used by nss-mdns. This issue is patched in commit 78eab31128479f06e30beb8c1cbf99dd921e2524, which is part of version 0.9-rc3. |
| On Windows, PHP's filesystem and stream APIs do not reject reserved device names such as CON, PRN, AUX, NUL, COM1 to COM9, LPT1 to LPT9, CONIN$ and CONOUT$ when they appear as a component of a path. An attacker-controlled filename therefore reaches CreateFileW() and opens a device instead of the regular file the application expected, which can block or hang the request and exhaust worker processes. |
| cleanup_xml_node() in the SOAP XML parser recurses once per XML nesting level with no depth limit. An unauthenticated attacker can post a SOAP request containing tens of thousands of nested elements to any SoapServer endpoint, exhaust the stack and crash the process. The same unbounded recursion exists in the SOAP value decoder and in the WSDL node search helper. |
| kin-openapi is a Go project for handling OpenAPI files. Prior to 0.149.0, runtime request, response, and direct schema validation lacks cycle detection when an allOf, anyOf, or oneOf chain refers back to an ancestor schema, even though loading and document validation accept the circular reference. A request or response that reaches the affected schema causes unbounded recursion in Schema.visitJSON or openapi3filter.decodeValue and exhausts the Go goroutine stack. The resulting fatal stack overflow cannot be caught with recover and terminates the entire process, including unrelated requests. This issue is fixed in version 0.149.0. |
| FasterXML Jackson 1.x, confirmed in jackson-mapper-asl versions 1.8.3, 1.9.2, 1.9.11, 1.9.12, and 1.9.13, allows attackers to cause a denial of service by supplying deeply nested JSON input to an application that deserializes untrusted JSON using ObjectMapper.readValue. |
| In EmberZNet 9.1.1 and earlier, a malformed Publish Billing Period command can result in a recursive function call that will never reach its end condition. These messages must come from a device that has already joined the network. Only devices supporting the Price Cluster are impacted. |
| libIEC61850 is an open-source implementation of IEC 61850 client and server protocols including MMS, GOOSE, Sampled Values, and R-Session. From 1.6.1 until 1.6.2, a successful MMS ObtainFile operation closes MmsObtainFileTask::fileHandle but leaves the stale non-NULL value in a task marked MMS_FILE_UPLOAD_STATE_NOT_USED. If a later ObtainFile request reuses that task and destination creation fails, MMS_FILE_UPLOAD_STATE_SEND_OBTAIN_FILE_ERROR_DESTINATION cleanup closes the stale FILE object again. Servers with the MMS file service and ObtainFile enabled can therefore be crashed remotely by the success-then-failure request sequence. This issue is fixed in version 1.6.2. |
| The workaround for XSA-433 (Zenbleed, CVE-2023-20593) was later
re-worked to better integrate with other manipulations of the same MSR.
In this rework an inverted conditional was introduced, resulting in the
workaround to not be applied when needed and vice versa.
For more details, see:
http://xenbits.xen.org/xsa/advisory-433.html |
| Uncontrolled recursion in the AMF parser in Apache bRPC < 1.18.0 allows a remote RTMP peer to crash a bRPC process by sending deeply nested AMF objects or arrays. The parser recursively processed nested AMF containers without enforcing a depth limit, which could exhaust the native stack.
Affected Scenarios:
Applications using bRPC RTMP support and parsing AMF data from an untrusted RTMP peer. This includes RTMP servers parsing client command messages, RTMP clients parsing server responses or status messages, and either side parsing inbound AMF script data such as metadata or cue points. Direct callers of ReadAMFObject or ReadAMFArray on untrusted input are also affected.
How to Fix:
1. Upgrade Apache bRPC to 1.18.0.
2. Apply the patch from PR https://github.com/apache/brpc/pull/3344 .
Note:
The fix introduces a configurable AMF nesting depth limit with default value 128. AMF objects or arrays deeper than amf_max_depth are rejected after applying the fix. |
