Export limit exceeded: 16509 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (16509 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-1883 | 2026-04-15 | 7.8 High | ||
| Out-Of-Bounds Write vulnerability exists in the OBJ file reading procedure in SOLIDWORKS eDrawings on Release SOLIDWORKS Desktop 2025. This vulnerability could allow an attacker to execute arbitrary code while opening a specially crafted OBJÂ file. | ||||
| CVE-2025-61553 | 1 Bitvisor | 1 Bitvisor | 2026-04-15 | 8.2 High |
| An out-of-bounds write in VirtIO network device emulation in BitVisor from commit 108df6 (2020-05-20) to commit 480907 (2025-07-06) allows local attackers to cause a denial of service (host hypervisor crash) via a crafted PCI configuration space access. Given it's a heap overflow in a privileged hypervisor context, exploitation may enable arbitrary code execution or guest-to-host privilege escalation. | ||||
| CVE-2025-41238 | 1 Vmware | 3 Esxi, Fusion, Workstation | 2026-04-15 | 9.3 Critical |
| VMware ESXi, Workstation, and Fusion contain a heap-overflow vulnerability in the PVSCSI (Paravirtualized SCSI) controller that leads to an out of-bounds write. A malicious actor with local administrative privileges on a virtual machine may exploit this issue to execute code as the virtual machine's VMX process running on the host. On ESXi, the exploitation is contained within the VMX sandbox and exploitable only with configurations that are unsupported. On Workstation and Fusion, this may lead to code execution on the machine where Workstation or Fusion is installed. | ||||
| CVE-2025-41413 | 2026-04-15 | 7.8 High | ||
| Fuji Electric Smart Editor is vulnerable to an out-of-bounds write, which may allow an attacker to execute arbitrary code. | ||||
| CVE-2025-41649 | 2026-04-15 | 7.5 High | ||
| An unauthenticated remote attacker can exploit insufficient input validation to write data beyond the bounds of a buffer, potentially leading to a denial-of-service condition for the devices. | ||||
| CVE-2024-7139 | 2026-04-15 | 6.5 Medium | ||
| Due to an unchecked buffer length, a specially crafted L2CAP packet can cause a buffer overflow. This buffer overflow triggers an assert, which results in a temporary denial of service. If a watchdog timer is not enabled, a hard reset is required to recover the device. | ||||
| CVE-2024-7137 | 2026-04-15 | 6.5 Medium | ||
| The L2CAP receive data buffer for L2CAP packets is restricted to packet sizes smaller than the maximum supported packet size. Receiving a packet that exceeds the restricted buffer length may cause a crash. A hard reset is required to recover the crashed device. | ||||
| CVE-2025-5943 | 1 Microdicom | 1 Dicom Viewer | 2026-04-15 | 8.8 High |
| MicroDicom DICOM Viewer suffers from an out-of-bounds write vulnerability. Remote attackers are able to exploit this issue to potentially execute arbitrary code on affected installations of DICOM Viewer. User interaction is required to exploit the vulnerability in that the user must either visit a malicious website or open a malicious DICOM file locally. | ||||
| CVE-2024-37676 | 1 Htop | 1 Htop | 2026-04-15 | 8.4 High |
| An issue in htop-dev htop v.2.20 allows a local attacker to cause an out-of-bounds access in the Header_populateFromSettings function. | ||||
| CVE-2024-45320 | 2026-04-15 | N/A | ||
| Out-of-bounds write vulnerability exists in DocuPrint CP225w 01.22.01 and earlier, DocuPrint CP228w 01.22.01 and earlier, DocuPrint CM225fw 01.10.01 and earlier, and DocuPrint CM228fw 01.10.01 and earlier. If an affected MFP processes a specially crafted printer job file, a denial-of-service (DoS) condition may occur. | ||||
| CVE-2025-25050 | 2026-04-15 | 8.8 High | ||
| An out-of-bounds write vulnerability exists in the cv_upgrade_sensor_firmware functionality of Dell ControlVault3 prior to 5.15.10.14 and Dell ControlVault 3 Plus prior to 6.2.26.36. A specially crafted ControlVault API call can lead to an out-of-bounds write. An attacker can issue an API call to trigger this vulnerability. | ||||
| CVE-2024-45288 | 1 Freebsd | 1 Freebsd | 2026-04-15 | 8.4 High |
| A missing null-termination character in the last element of an nvlist array string can lead to writing outside the allocated buffer. | ||||
| CVE-2025-59729 | 1 Ffmpeg | 1 Ffmpeg | 2026-04-15 | 6.8 Medium |
| When parsing the header for a DHAV file, there's an integer underflow in offset calculation that leads to reading the duration from before the start of the allocated buffer. If we load a DHAV file that is larger than MAX_DURATION_BUFFER_SIZE bytes (0x100000) for example 0x101000 bytes, then at [0] we have size = 0x101000. At [1] we have end_buffer_size = 0x100000, and at [2] we have end_buffer_pos = 0x1000. The loop then scans backwards through the buffer looking for the dhav tag; when it is found, we'll calculate end_pos based on a 32-bit offset read from the buffer. There is subsequently a check [3] that end_pos is within the section of the file that has been copied into end_buffer, but it only correctly handles the cases where end_pos is before the start of the file or after the section copied into end_buffer, and not the case where end_pos is within the the file, but before the section copied into end_buffer. If we provide such an offset, (end_pos - end_buffer_pos) can underflow, resulting in the subsequent access at [4] occurring before the beginning of the allocation. We recommend upgrading to version 8.0 or beyond. | ||||
| CVE-2025-59733 | 1 Ffmpeg | 1 Ffmpeg | 2026-04-15 | 6.5 Medium |
| When decoding an OpenEXR file that uses DWAA or DWAB compression, there's an implicit assumption that all image channels have the same pixel type (and size), and that if there are four channels, the first four are "B", "G", "R" and "A". The channel parsing code can be found in decode_header. The buffer td->uncompressed_data is allocated in decode_block based on the xsize, ysize and computed current_channel_offset. The function dwa_uncompress then assumes at [5] that if there are 4 channels, these are "B", "G", "R" and "A", and in the calculations at [6] and [7] that all channels are of the same type, which matches the type of the main color channels. If we set the main color channels to a 4-byte type and add duplicate or unknown channels of the 2-byte EXR_HALF type, then the addition at [7] will increment the pointer by 4-bytes * xsize * nb_channels, which will exceed the allocated buffer. We recommend upgrading to version 8.0 or beyond. | ||||
| CVE-2025-59730 | 1 Ffmpeg | 1 Ffmpeg | 2026-04-15 | 6.5 Medium |
| When decoding a frame for a SANM file (ANIM v0 variant), the decoded data can be larger than the buffer allocated for it. Frames encoded with codec 48 can specify their resolution (width x height). A buffer of appropriate size is allocated depending on the resolution. This codec can encode the frame contents using a run-length encoding algorithm. There are no checks that the decoded frame fits in the allocated buffer, leading to a heap-buffer-overflow. process_frame_obj initializes the buffers based on the frame resolution: We recommend upgrading to version 8.0 or beyond. | ||||
| CVE-2025-35975 | 1 Microdicom | 1 Dicom Viewer | 2026-04-15 | 8.8 High |
| MicroDicom DICOM Viewer is vulnerable to an out-of-bounds write which may allow an attacker to execute arbitrary code. The user must open a malicious DCM file for exploitation. | ||||
| CVE-2025-59731 | 1 Ffmpeg | 1 Ffmpeg | 2026-04-15 | N/A |
| When decoding an OpenEXR file that uses DWAA or DWAB compression, the specified raw length of run-length-encoded data is not checked when using it to calculate the output data. We read rle_raw_size from the input file at [0], we decompress and decode into the buffer td->rle_raw_data of size rle_raw_size at [1], and then at [2] we will access entries in this buffer up to (td->xsize - 1) * (td->ysize - 1) + rle_raw_size / 2, which may exceed rle_raw_size. We recommend upgrading to version 8.0 or beyond. | ||||
| CVE-2024-43688 | 2 Openbsd, Vixie | 2 Openbsd, Cron | 2026-04-15 | 7.3 High |
| cron/entry.c in vixie cron before 9cc8ab1, as used in OpenBSD 7.4 and 7.5, allows a heap-based buffer underflow and memory corruption. NOTE: this issue was introduced during a May 2023 refactoring. | ||||
| CVE-2026-27664 | 1 Siemens | 2 Cpci85 Central Processing\/communication, Sicore Base System | 2026-04-14 | 7.5 High |
| A vulnerability has been identified in CPCI85 Central Processing/Communication (All versions < V26.10), SICORE Base system (All versions < V26.10.0). The affected application contains an out-of-bounds write vulnerability while parsing specially crafted XML inputs. This could allow an unauthenticated attacker to exploit this issue by sending a malicious XML request, which may cause the service to crash, resulting in a denial-of-service condition. | ||||
| CVE-2026-4685 | 1 Mozilla | 2 Firefox, Firefox Esr | 2026-04-14 | 7.5 High |
| Incorrect boundary conditions in the Graphics: Canvas2D component. This vulnerability was fixed in Firefox 149, Firefox ESR 115.34, Firefox ESR 140.9, Thunderbird 149, and Thunderbird 140.9. | ||||