Export limit exceeded: 430618 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (430618 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-99794 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-22 | 8.3 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: Reject signalling responses in invalid states A peer can send configuration messages while an incoming channel is in BT_CONNECT2, before the security or deferred accept gate has completed. A configuration response can then promote the channel to BT_CONNECTED. Configuration responses can also act on channels that are closing, and a late connection response can move a disconnecting channel back to BT_CONFIG. Accept connection responses only while waiting in BT_CONNECT. Answer configuration requests in BT_CONNECT2, but defer our own request until BT_CONFIG so configuration cannot complete before the gate. Ignore configuration responses outside BT_CONFIG and BT_CONNECTED, and only complete configuration in BT_CONFIG. | ||||
| CVE-2026-99793 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-22 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: Only accept connection responses to outstanding requests An outgoing channel waits in BT_CONNECT until security and the feature mask exchange complete, and only then sends its connection request. A peer can answer it before that with a connection response matching our source CID. The channel then moves to BT_CONFIG, completes configuration and becomes connected before security has completed. If security then fails, l2cap_security_cfm() leaves the connected channel alone, so it stays up on a link that did not reach the required security level. A connection response with a zero source CID is matched by identifier. Another channel can hold the same identifier for a response it still has to send, so the lookup can pick the wrong channel. Only accept a connection response while our request is outstanding, and only look at such channels when matching by identifier. | ||||
| CVE-2026-99792 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-22 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: smb/server: prevent file publication after tree disconnect TREE_DISCONNECT closes the tree's published file handles before marking and removing the tree connection. A concurrent CREATE that already holds a tree reference can therefore publish its file after the close pass. When CREATE drops its reference, the tree can be freed while the published file still points to it. Mark and remove the tree connection before closing its files, and serialize both new-open and durable-reconnect volatile ID publication with that state transition. An opener is then either published in time for the close pass or rejected after disconnect with STATUS_NETWORK_NAME_DELETED. Keep a tree reference while a file carries its tree pointer. This protects asynchronous users that can defer the file's final destruction past tree disconnect. The close pass can race the successful FP_NEW to FP_INITED transition. Take the opening request's file reference atomically with that transition. This keeps the file alive until request completion even if teardown removes the ID immediately. BUG: KASAN: slab-use-after-free in proc_show_files (fs/smb/server/vfs_cache.c:126) Read of size 4 at addr ff11000101540f80 by task poc/153 Call Trace: proc_show_files (fs/smb/server/vfs_cache.c:126) seq_read_iter (fs/seq_file.c:231) proc_reg_read_iter (fs/proc/inode.c:299) vfs_read (fs/read_write.c:574) ksys_read (fs/read_write.c:716) do_syscall_64 (arch/x86/entry/syscall_64.c:84) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121) Allocated by: ksmbd_tree_conn_connect (fs/smb/server/mgmt/tree_connect.c:35) smb2_tree_connect (fs/smb/server/smb2pdu.c:2819) handle_ksmbd_work (fs/smb/server/server.c:368) Freed by: kfree (mm/slub.c:6801) handle_ksmbd_work (fs/smb/server/server.c:332) | ||||
| CVE-2026-99785 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-22 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: 9p/trans_virtio: reject mount tags longer than NAME_MAX at probe p9_virtio_probe() reads a 16-bit mount tag length (tag_len) from the device config and kzalloc()s tag_len + 1 bytes for chan->tag with no upper bound. A malicious or compromised host can present a tag of up to 65535 bytes; that tag is later copied into the single-page sysfs buffer by p9_mount_tag_show() (memcpy(buf, chan->tag, tag_len + 1)), a host-controlled out-of-bounds write of up to ~64 KiB past the PAGE_SIZE attribute buffer. Reject an overlong tag at probe time. A 9p mount tag is a name-like identifier, so bound it by NAME_MAX (255): that limit is independent of the sysfs/seq_file page size and is far above any legitimate mount tag, which keeps p9_mount_tag_show() safe at the root without hard-coding a seq_file implementation detail. | ||||
| CVE-2026-99773 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-22 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/drm_crtc: ensure dma_fence_ops remain valid during device unbind In [1], sashiko reported the following issue: === snip === Looking at how these fences are managed, drm_crtc_create_fence() creates a dma_fence without taking a reference to the drm_device or drm_crtc. Because the sync_file framework exposes this fence to userspace, the fence can outlive the CRTC. The dma_fence contract requires that data accessed by dma_fence_ops (like get_driver_name) must remain valid for an RCU grace period after the fence is signaled. However, drm_crtc_cleanup() and the subsequent freeing of the device do not wait for an RCU grace period via synchronize_rcu(). If userspace calls ioctl(SYNC_IOC_FILE_INFO) concurrently with a device hot-unplug: CPU1 (Userspace) sync_file_get_name() ops = rcu_dereference(fence->ops); if (!dma_fence_test_signaled_flag()) // Preempted or delayed here CPU2 (Driver Teardown) Signals the fence (setting fence->ops = NULL) Destroys and frees the CRTC without waiting for an RCU grace period CPU1 (Resumes) ops->get_driver_name(fence) -> drm_crtc_fence_get_driver_name() crtc = fence_to_crtc(fence); // Casts to the freed CRTC return crtc->dev->driver->name; // Use-after-free ... Does the CRTC or DRM device need to be kept alive for the RCU grace period, or should the fence hold a proper reference to prevent the use-after-free when get_driver_name() and get_timeline_name() access the freed CRTC structure? === snap === I believe this to be a correct observation and this patch implements the suggestion of waiting for an RCU grace period before proceeding with destruction of the drm_crtc, so that get_driver_name() and get_timeline_name() can still work. | ||||
| CVE-2026-99761 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-22 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: batman-adv: stop originator purge worker before freeing TT batadv_mesh_free() releases the translation tables via batadv_tt_free() before batadv_originator_free() stops orig_work. The purge worker can therefore still run while the TT is torn down. When an originator times out, batadv_purge_orig_ref() calls batadv_tt_global_del_orig(), which loads tt.global_hash and walks all buckets while taking their locks: CPU0 CPU1 batadv_tt_free() batadv_purge_orig() batadv_tt_global_del_orig() hash = ...tt.global_hash; batadv_tt_global_table_free() batadv_hash_destroy(hash); spin_lock_bh(&hash->list_locks[i]); Disable orig_work at the beginning of batadv_mesh_free(), directly after the mesh was marked as deactivating. The second disable_delayed_work_sync() in batadv_originator_free() is harmless because it is free'd anyway. | ||||
| CVE-2026-99760 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-22 | 7.6 High |
| In the Linux kernel, the following vulnerability has been resolved: batman-adv: tt: ignore ROAM flag of received ADD changes A received TT change (OGM diff or full table response) with the ROAM flag but without DEL is handled by batadv_tt_global_add() like a ROAMING_ADV: * a newly created global entry gets BATADV_TT_CLIENT_ROAM and is therefore excluded from the global CRC. The sender has it in its local CRC and the receiver has to request the full table again * batadv_tt_global_purge_local() removes the local entry of the receiver. The receiver's own client is considered as roamed to the sender and frames for it are rerouted The ROAM flag only has a meaning together with DEL. Drop it on reception to keep it from populating the global table with a temporary ROAMING entry which is not part of the CRC - and therefore causing a CRC mismatch. | ||||
| CVE-2026-99753 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-22 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/loongson: Fix double free on BO initialization failure If ttm_bo_init_validate() fails, it drops the buffer object's reference and cleans it up through the supplied destroy callback. lsdc_bo_destroy() releases the GEM object and frees the enclosing lsdc_bo, so freeing it again in lsdc_bo_create() causes a double free on a synchronous failure path. Let TTM own the cleanup after initialization has started and return the error directly. Keep the explicit free on drm_gem_object_init() failure, which occurs before ownership is passed to TTM. Tested on LS7A2000 by making drm_vma_offset_add() return -ENOSPC for one selected dumb-buffer creation. The error reached userspace, the destroy callback ran once, and no handle was published or tracked BO retained. Normal buffer creation, zeroing, mapping, readback and release passed. AI assistance was used for the ownership analysis, fix, fault-injection tools, build and test execution. | ||||
| CVE-2026-99746 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-22 | 7 High |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: SOF: Intel: hda-sdw-bpt: Stop active DMA before closing BPT streams When sdw_enable_stream() fails in intel_ace2x_bpt_send_async() after hda_sdw_bpt_send_async() has already started the TX and RX DMA streams, intel_ace2x_bpt_close_stream() invokes hda_sdw_bpt_close() directly without calling hda_sdw_bpt_wait(). As a result, hda_sdw_bpt_dma_deprepare() tears down the DMA buffers and BDL while the DMA hardware is still running. Disable any running TX or RX BPT DMA stream at the start of hda_sdw_bpt_close() before unmapping channels and depreparing DMA resources. | ||||
| CVE-2026-99744 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-22 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: net: atl1c: drop oversized RX frames instead of panicking atl1c sizes its receive buffers from the netdev MTU plus a fixed set of L2 overheads, which comes to 1522 bytes at the default MTU. A link partner that sends a longer frame - in practice a MikroTik CCR2004-1G-2XS-PCIe, whose RouterOS side defaults to l2mtu 1600 while the host stays at MTU 1500 - makes the length reported by the RX return descriptor exceed what the hardware wrote, and skb_put() then either includes bytes that were never received or trips skb_over_panic and takes the host down. Compare the descriptor length against buffer_info->length, the length the hardware was given, rather than against skb_tailroom(): the skb carries 64 bytes of slack for the DMA erratum, so tailroom is larger than the DMA buffer and a frame in between would pass the check and still be delivered with a tail the device never wrote. The same test rejects frames shorter than ETH_HLEN + ETH_FCS_LEN; before this change a reported length below ETH_FCS_LEN underflowed in skb_put(). The frame is dropped with kfree_skb_reason(SKB_DROP_REASON_PKT_TOO_BIG) so drop_monitor and the kfree_skb tracepoint see it, and counted through dev_core_stats_rx_dropped_inc(), which survives atl1c_get_stats() overwriting the hardware counters on every read. It also counts as work: atl1c_clean_rfd() has already recycled the RFD, and the refill at the end of the poll only runs when work_done is non-zero, so sustained oversized traffic would otherwise drain the ring and stop RX. Tested on a MikroTik CCR2004-1G-2XS-PCIe (4x AR8151) in a Proxmox VE host, with atl1c built from a DKMS tree carrying this change: the l2mtu-1600 traffic that panics the stock driver is dropped and counted with the patch applied, and received normally once the host MTU is raised to match. This complements commit 36c2009d90f2 ("net: atl1c: fix soft lockup on out-of-range tpd_cons read"), which fixed the TX side of the same "host dies while the card resets" problem. | ||||
| CVE-2026-99735 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-22 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: mm/mglru: don't use stack pointers when walking PUD and PMD tables MGLRU passes stack copies of page-table entries in walk_pud_range() and walk_pmd_range() when walking to the next level. These copies can become stale when khugepaged or MADV_DONTNEED (CONFIG_PT_RECLAIM) removes a PTE table concurrently. This pattern dates back to commit bd74fdaea146 ("mm: multi-gen LRU: support page table walks"). Likely, earlier locking masked the latent bug. Later changes exposed it: commit 1d65b771bc08 ("mm/khugepaged: retract_page_tables() without mmap or vma lock") allowed concurrent retraction, and commit cf4a65539c13 ("memcg-v1: no need for memcg locking for MGLRU") dropped the walker's outer RCU protection. The fix is simple, so just fix the original commit so we don't have to speculate. To fix it, pass the actual PMD/PUD pointers. This restores the RCU-protected lookup and validation against the live PMD. Note that the PUD handling is required as well to handle folded page tables correctly in all cases. Fix generated by an LLM and sent by Josef Bacik in private. [ david: handle walk_pud_range() as well, clarify+simplify description, adjust Fixes: ] | ||||
| CVE-2026-99730 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-22 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: mm/filemap: finish fault cleanup before dropping the fault lock On a retried fault, a fatal signal interrupting the folio lock wait makes lock_folio_maybe_drop_mmap() drop the fault lock without pinning the file. However, filemap_fault() may still need to release mapping->invalidate_lock. A concurrent munmap() can release the last file reference and free the mapping before that unlock. Defer dropping the fault lock to filemap_fault()'s retry cleanup, after releasing invalidate_lock. If the fault lock was already dropped for I/O, release the existing file reference instead. Keep the fault lock held for FAULT_FLAG_RETRY_NOWAIT as before. | ||||
| CVE-2026-99728 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-22 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: mm/huge_memory: fix list corruption when deferred_split_scan() races with deferred_split_folio() Since the deferred split queue became a list_lru, the isolate callback moves the folios it took a reference on to an on-stack list, linked through folio->_deferred_list, and deferred_split_scan() takes them off that list with list_del_init() without holding the list_lru lock. deferred_split_folio() does not know about the on-stack list. It only holds the list_lru lock when it looks at the same list_head, and it can run for such a folio: a THP is queued when it is mapped, as a candidate for the underused check, and is queued "again" when a part of it gets unmapped: CPU0 deferred_split_scan() CPU1 deferred_split_folio() list_del_init(&folio->_deferred_list) next->prev = prev prev->next = next entry->next = entry list_lru_lock_irqsave() folio_set_partially_mapped() __list_lru_add() list_empty(item) -> true list_add_tail(item, &l->list) item->next = &l->list item->prev = tail entry->prev = entry The folio now sits on the list_lru with ->prev pointing to itself. The next removal leaves the neighbours pointing to it, and they still do so after the folio has been freed. With CONFIG_DEBUG_LIST: list_del corruption. prev->next should be ffd4000000270090, but was ffd4000000278090. (prev=ffd4000000270090) Fix it by grabbing the lock around list_del_init() so deferred_split_folio() cannot race with it. | ||||
| CVE-2026-99725 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-22 | 7 High |
| In the Linux kernel, the following vulnerability has been resolved: cipso: fix optlen corruption in cipso_v4_delopt() cipso_v4_delopt() recomputes the option length by walking the option buffer after the CIPSO option has been moved out. The walk then reads the stale bytes at the tail of the buffer as option data, and a crafted setsockopt(IP_OPTIONS) buffer can make it treat one of them as an option length, increasing opt->opt.optlen beyond the valid option data. The corrupted length stays on the socket and is later used as the copy length by getsockopt(IP_OPTIONS) and by the udp/raw/ping sendmsg paths, where it exceeds the size of the buffers they copy into. Compute the new length from the intact options before the move and subtract the CIPSO length, and fill the padding with IPOPT_END. | ||||
| CVE-2026-99724 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-22 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ntfs: don't allow compression on volumes with clusters larger than 4K On a volume made with "mkntfs -c 8192", a user can set FILE_ATTR_COMPRESSED on an empty file through system.ntfs_attrib. Writing to the file and reading it back after dropping the page cache then crashes: BUG: KASAN: slab-out-of-bounds in ntfs_read_compressed_block+0xa2c/0x2040 Read of size 8192 at addr ffff88804355a000 by task dd/106 The read path only handles clusters up to 4K. It copies each cluster out of a single page, and a compression block of 16 8K clusters does not fit in the 64K ntfs_compression_buffer. Loading an inode already rejects compressed data on such volumes. Reject the flag change the same way. | ||||
| CVE-2026-99715 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-22 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: nvme-rdma: fix NULL queue->ctrl dereference on reconnect Since commit 2a8513091d2f ("nvme-rdma: parallelize I/O queue allocation and startup"), a reconnect that gets more I/O queues than before grows the tag set before the new queues are set up. queue->ctrl is only set by nvme_rdma_setup_io_queues(), so I/O submitted in between reaches nvme_rdma_queue_rq() on a queue that was never allocated and dereferences a NULL queue->ctrl: BUG: kernel NULL pointer dereference, address: 000000000000034c RIP: 0010:nvme_rdma_queue_rq+0x52/0xb90 Set queue->ctrl for every queue when allocating the controller. Such requests are then requeued like on any other queue that is not live. | ||||
| CVE-2026-99697 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-22 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: mm: memcontrol: fix NULL pointer deref and UAF from high_work_func() on dying memcg When memory.high is exceeded in non-task context, try_charge_memcg() schedules memcg->high_work without taking a reference on the memcg, and high_work_func() invokes reclaim_high() without pinning the memcg. With obj_cgroup reparenting, introduced in commit bf4f059954dc ("mm: memcg/slab: obj_cgroup API"), objects charged to a child memcg are reparented to its parent in mem_cgroup_css_offline() instead of holding a reference on the child until uncharged. Subsequent uncharges of those objects go to the parent, which can leave the child's memory use permanently above its high limit, so any later charge on the offlined memcg in non-task context schedules high_work. This was later widened from kernel memory to LRU folios when commit f1cf8d2f36dc ("mm: memcontrol: eliminate the problem of dying memory cgroup for LRU folios") converted LRU folios to use obj_cgroup reparenting. cancel_work_sync(&memcg->high_work) only runs at the end of teardown in mem_cgroup_css_free(), so high_work_func() can start or still be running reclaim_high() after mem_cgroup_css_released() or shrink_many() has called lru_gen_release_memcg() and unhashed lruvec->lrugen.list. If reclaim tries to rotate the memcg, lru_gen_rotate_memcg() dereferences a NULL pprev pointer. This issue is specific to MGLRU and was introduced with the memcg LRU in commit e4dde56cd208 ("mm: multi-gen LRU: per-node lru_gen_folio lists"). With either traditional LRU or MGLRU, css_free_rwork_fn() calls css_rstat_exit() which frees per-CPU rstat data before calling mem_cgroup_css_free(). If reclaim_high() is still running, rstat updates via mod_lruvec_state() -> __css_rstat_updated() cause a use-after-free on the per-CPU rstat data. This was introduced when commit 5da3bfa029d6 ("cgroup: use separate rstat trees for each subsystem") moved css_rstat_exit() ahead of ss->css_free(). Fix both problems by acquiring a reference with css_tryget_online() in high_work_func() before calling reclaim_high(), and by resetting memory.high and swap.high to PAGE_COUNTER_MAX in mem_cgroup_css_offline() so that charges via references on an offlined memcg do not trigger high_work on the dead child and skip checking live ancestors in try_charge_memcg(). Acquiring the reference in high_work_func() rather than before scheduling high_work is safe because mem_cgroup_css_free() calls irq_work_sync() and cancel_work_sync() which cancels pending work and waits for an already running high_work_func() to complete before mem_cgroup_free() frees the memcg. css_tryget_online() uses percpu_ref_tryget_live() and is safe to call after percpu_ref_exit() before the cgroup is freed unlike css_tryget(). Oops: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] CPU: 1 UID: 0 PID: 27 Comm: kworker/1:0 Tainted: G B W 7.3.0-rc5-g2bba28e98578 #284 PREEMPT(full) Tainted: [B]=BAD_PAGE, [W]=WARN <-- Taint from lru_gen_rotate_memcg() VM_WARN_ON_ONCE Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-debian-1.17.0-1 04/01/2014 Workqueue: events high_work_func RIP: 0010:lru_gen_rotate_memcg+0x1a3/0xe90 Call Trace: <TASK> ? read_ctrl_pos+0x22f/0x3f0 shrink_lruvec+0x16cb/0x1b80 ? ret_from_fork_asm+0x1a/0x30 ? lapic_next_event+0x15/0x20 ? clockevents_program_event+0x2bb/0x6f0 ? lapic_next_event+0x15/0x20 ? __pfx_shrink_lruvec+0x10/0x10 ? __pfx_clockevents_program_event+0x10/0x10 ? _raw_spin_lock+0x84/0xe0 ? __pfx__raw_spin_lock+0x10/0x10 ? kasan_save_stack+0x30/0x50 ? psi_group_change+0x381/0x740 ? __pfx_sched_clock_cpu+0x10/0x10 ? save_fpregs_to_fpstate+0xc4/0x2c0 ? finish_task_switch.isra.0+0x1de/0xac0 ? __schedule+0xf62/0x42c0 ? __pfx___schedule+0x10/0x10 ? __pfx___irq_work_queue_lo ---truncated--- | ||||
| CVE-2026-99690 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-22 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ocfs2: cache the mount context for dentry lock callbacks ocfs2_drop_dentry_lock() drops the inode reference before releasing the DENTRY lock. This lets inode eviction release the local inode and open locks before a remote unlink can proceed past the DENTRY lock. A DLM callback can still arrive before the DENTRY lock has been dropped. ocfs2_get_dentry_osb() obtains the mount context through dl_inode->i_sb, which can access a freed inode when the downconvert thread drops the last inode reference in its post-unlock callback: Downconvert thread DLM callback thread ------------------ ------------------- ocfs2_process_blocked_lock() ocfs2_dentry_post_unlock() ocfs2_dentry_lock_put() ocfs2_drop_dentry_lock() iput(dl->dl_inode) [inode reclaimed after RCU] ocfs2_blocking_ast() ocfs2_get_dentry_osb() dl->dl_inode->i_sb ocfs2_simple_drop_lockres() Store the mount context in the DENTRY lock resource's l_priv field and use the default mount-context lookup. Recover the containing dentry lock with container_of(), as already done for refcount locks, and remove ocfs2_get_dentry_osb(). ocfs2_dismount_volume() shuts down the DLM before freeing the mount context, so callbacks can use it without accessing the inode. Preserve the existing iput-before-unlock order to avoid delaying local inode and open lock release until after the DENTRY lock is released. | ||||
| CVE-2026-99688 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-22 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: sch_qfq: prevent aggregate self-replacement qfq_change_class() snapshots the current aggregate settings while holding the qdisc tree lock, but drops the lock before selecting the destination aggregate. During that gap, qfq_enqueue() can move the class to an aggregate matching the requested settings. When qfq_change_class() resumes, qfq_find_agg() then returns cl->agg. If it is a singleton, qfq_deact_rm_from_agg() frees the aggregate before qfq_add_to_agg() immediately accesses the same pointer, causing a use-after-free. While holding the tree lock, skip the replacement when the destination is already the current aggregate. Any estimator replacement has already completed, so the class change can finish normally. | ||||
| CVE-2026-99686 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-22 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: vhost: fix used ring index wrap in vhost_add_used_n_in_order vhost_add_used_n_in_order() advances start by nheads[i] but wraps it with a single subtraction. If start + nheads[i] >= 2 * vq->num, start can remain outside the ring. With used-ring logging enabled, start > vq->num makes (vq->num - start) underflow. log_write() then sets bits beyond the dirty-log bitmap, potentially corrupting adjacent userspace memory. This is reachable on the vhost-net TX path with VIRTIO_F_IN_ORDER: done_idx can reach VHOST_NET_BATCH (64), triggering the issue with a 32-entry ring. Wrap start with a mask to keep it within the ring. VHOST_SET_VRING_NUM enforces a nonzero power-of-two ring size, allowing start to be wrapped using & (vq->num - 1). | ||||