wifi: rtw88: usb: route bmc frames via the high queue only for DTIM delivery
In AP mode every broadcast and multicast data frame is routed to
TX_DESC_QSEL_HIGH, the after-DTIM queue, whether or not anybody is
asleep. The firmware drains that queue at beacon pace, a dozen or so
frames per second measured on RTL8822BU, while one associated client's
mDNS/SSDP chatter alone exceeds that. The excess accumulates inside
the chip until the shared TX page pool is exhausted (measured: 14 of
1803 pages left). From that point every host-sourced frame queues
behind the backlog: authentication responses reach the air seconds
after the client has given up, so no station can associate anymore,
and the beacon reserved-page download fails the BCN_VALID poll
("error beacon valid") because it needs pages from the same pool. The
AP keeps beaconing, so the failure looks like a silent RX stall and
only a reboot recovers.
mac80211 already decides when after-DTIM delivery is needed: it sets
IEEE80211_TX_CTL_SEND_AFTER_DTIM on bmc frames only while at least one
station is actually dozing. Honor that instead of routing
unconditionally: flagged frames keep going through the high queue with
the MORE_DATA and HGQMD handling introduced by commit 076f786a0ae1
("wifi: rtw88: Fix AP mode incorrect DTIM behavior"), everything else
leaves at line rate through the AC queues. This partially reverts the
usb.c hunk of that commit, whose unconditional routing is what lets
the backlog build up.
On a bench AP (USB2, 20 MHz, WPA2, hostapd, a Windows client driven
through disconnect/reconnect cycles): reconnects fail 0/5 on RTL8822BU
and 0/3 on RTL8821CU before this change, and pass 10/10 and 5/5 with
it, with the page pool staying healthy and no beacon errors logged.
Analysis and contextual insights are available on OpenCVE Cloud.
No solution or workaround provided in the CVE record.
Additional remediation guidance may be available on OpenCVE Cloud.
Tracking
Sign in to view the affected projects.
No advisories yet.
Fri, 20 Nov 2026 10:45:00 +0000
| Type | Values Removed | Values Added |
|---|---|---|
| First Time appeared |
Linux linux
|
|
| Vendors & Products |
Linux linux
|
Fri, 20 Nov 2026 06:00:00 +0000
| Type | Values Removed | Values Added |
|---|---|---|
| Description | In the Linux kernel, the following vulnerability has been resolved: wifi: rtw88: usb: route bmc frames via the high queue only for DTIM delivery In AP mode every broadcast and multicast data frame is routed to TX_DESC_QSEL_HIGH, the after-DTIM queue, whether or not anybody is asleep. The firmware drains that queue at beacon pace, a dozen or so frames per second measured on RTL8822BU, while one associated client's mDNS/SSDP chatter alone exceeds that. The excess accumulates inside the chip until the shared TX page pool is exhausted (measured: 14 of 1803 pages left). From that point every host-sourced frame queues behind the backlog: authentication responses reach the air seconds after the client has given up, so no station can associate anymore, and the beacon reserved-page download fails the BCN_VALID poll ("error beacon valid") because it needs pages from the same pool. The AP keeps beaconing, so the failure looks like a silent RX stall and only a reboot recovers. mac80211 already decides when after-DTIM delivery is needed: it sets IEEE80211_TX_CTL_SEND_AFTER_DTIM on bmc frames only while at least one station is actually dozing. Honor that instead of routing unconditionally: flagged frames keep going through the high queue with the MORE_DATA and HGQMD handling introduced by commit 076f786a0ae1 ("wifi: rtw88: Fix AP mode incorrect DTIM behavior"), everything else leaves at line rate through the AC queues. This partially reverts the usb.c hunk of that commit, whose unconditional routing is what lets the backlog build up. On a bench AP (USB2, 20 MHz, WPA2, hostapd, a Windows client driven through disconnect/reconnect cycles): reconnects fail 0/5 on RTL8822BU and 0/3 on RTL8821CU before this change, and pass 10/10 and 5/5 with it, with the page pool staying healthy and no beacon errors logged. | |
| Title | wifi: rtw88: usb: route bmc frames via the high queue only for DTIM delivery | |
| First Time appeared |
Linux
Linux linux Kernel |
|
| CPEs | cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:* | |
| Vendors & Products |
Linux
Linux linux Kernel |
|
| References |
|
Status: PUBLISHED
Assigner: Linux
Published:
Updated: 2026-11-20T05:49:10.728Z
Reserved: 2026-09-25T10:25:14.423Z
Link: CVE-2026-99578
No data.
Status : Received
Published: 2026-11-20T06:17:48.980
Modified: 2026-11-20T06:17:48.980
Link: CVE-2026-99578
No data.
OpenCVE Enrichment
Updated: 2026-11-20T10:30:16Z
No weakness.