Export limit exceeded: 429957 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (429957 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-99648 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-20 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mm/vma: call ->may_split() before a partial merge A driver can use the ->may_split() hook to forbid a VMA boundary at certain addresses. A device-dax device is a character device that gives raw access to a range of memory through mmap(). device-dax refuses any address that is not a multiple of the device's alignment through vm_ops->may_split. vma_merge_existing_range() can move boundaries, but does not call vm_ops->may_split. If a range at the edge of a VMA gets the attributes of the adjacent VMA, the function moves only that range over to the neighbour: one VMA shrinks and the other grows. This is a partial merge, and vma_modify() tries it before any split. Take a device-dax VMA that lies next to another VMA of the same file. The user calls mprotect() on the one page of the first VMA that touches the second VMA, and asks for the protection that the second VMA already has. The result is a partial merge. It puts the boundary inside a 1 GiB mapping, which is a single leaf entry at the PUD level. As part of the merge, the kernel looks for a huge PMD to split at the new boundary. That code does not expect a PUD leaf: vma_merge_existing_range() commit_merge() vma_adjust_trans_huge() split_huge_pmd_address() mm_find_pmd() treats the PUD leaf as a pointer to a PMD table, so the "table" is the device memory that the leaf maps __split_huge_pmd() reads a PMD that the user wrote to the device memory folio_put() on the folio that this PMD names Bad. While the code must at some point be taught to split PUD entries as well, the issue here is that we move VMA boundaries such that they are incompatible with the driver. Fix this by calling ->may_split() on the address that a partial merge would move the boundary to, and by abandoning the merge if the driver refuses. vma_modify() then tries the split, which fails with -EINVAL. Factor out existing split handling into check_split() and reuse it. Fix generated by an LLM and sent by Chris Mason in private. [ david: improve description; cleanup the code ] | ||||
| CVE-2026-99649 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-20 | 2.5 Low |
| In the Linux kernel, the following vulnerability has been resolved: mm/ksm: check large swap-cache folios before mapping them KSM folios are always small, but their shared swap slots can be read back as part of a large folio in the swap cache. ksm_might_need_to_copy() skips large folios, so another process can map a page with an incompatible anon_vma or page index. Reverse mapping then cannot find the new mapping, preventing migration or reclaim. Apply the same compatibility checks to large folios as to small ones. Pass the page corresponding to the swap entry and copy only that page when necessary. In do_swap_page()'s copy path, decrement only that slot's swap count, because the source swap-cache folio can now be large. Fix generated by an LLM and sent by Chris Mason in private. | ||||
| CVE-2026-99650 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-20 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mm/ksm: fix use of a freed anon_vma at swap-in A folio read from a swap slot previously shared by KSM can remain in the swap cache after the process that first mapped it exits. Its anon_vma can then be freed, so ksm_might_need_to_copy() must not dereference it to compare roots. Doing so can result in some false-positives, resulting in the reverse mapping missing the new folio mapping, preventing migration and reclaim. SLAB_TYPESAFE_BY_RCU allows individual anon_vma objects to be reused immediately after freeing. A stale pointer can then refer to another anon_vma whose root matches, even though the target VMA is not linked to that anon_vma. Move the anonymous rmap compatibility checks into folio_anon_rmap_compatible(). Keep the page-index check and compare the folio's anon_vma pointer against the VMA's own anon_vma and root first. If neither matches, bite the bullet and walk the VMA's anon_vma_chain. The VMA keeps these anon_vmas alive, and finding a match guarantees that reverse mapping can find the new mapping. Lorenzo Stoakes says in a private discussion: "This isn't quite equivalent to the existing check. Every anon_vma in an anon_vma_chain shares the same root, but if you split a VMA then fork both of them like this: VMA A / \ <split> VMA B VMA C \ / root <- anon_vma 1 ----^ ^---- <fork> / parent \ anon_vma 2 anon_vma 3 | | VMA D VMA E VMA's D and E both get their own new anon_vma's such that: VMA D: anon_vma 2 -> anon_vma 1 -> root VMA E: anon_vma 3 -> anon_vma 1 -> root And if you found a folio referencing anon_vma 2, the existing check: anon_vma->root == vma->anon-vma->root Would be true for VMA's B, C, D & E. However after your change it'd be true for VMA D only, as it's the only one with anon_vma 2 in its anon_vma_chain. Whether or not that could actually happen in practice... 🙂 I don't know. [...] after your change it'd be true for VMA D only, as it's the only one with anon_vma 2 in its anon_vma_chain. [...] I would [...] say that you are making the test stricter but more correct. " If this affects performance when KSM was never even involved, we could just track whether KSM ever merged anything and just skip these checks. There isn't really a lot we can do otherwise: for mapped folios we might be able to use folio_get_anon_vma(), but for unmapped folios there really is no easy way to see if the anon_vma is still valid. Document the (confusing) lifetime requirements of folio_anon_vma(). | ||||
| CVE-2026-99652 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-20 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mm: fix deadlock of mremap() against UFFDIO_MOVE With per-VMA locks, UFFDIO_MOVE can run concurrently with mremap() on different VMAs in the same mm. Those VMAs can share page tables, so both operations can acquire the same pair of page-table locks. UFFDIO_MOVE orders the locks by address, while mremap() takes the source lock first. These conflicting orders can deadlock; mremap() holding mmap_lock for writing no longer helps. Move double_pt_lock() and double_pt_unlock() to mm/internal.h and use them for all page-table moves in mremap(). Preserve the source entry checks after acquiring both locks. Remove the comments claiming that exclusive mmap_lock makes lock ordering irrelevant. In move_ptes(), make sure to just recheck source and destination PMD after taking the locks and drop the overly-long comment. Fix generated by an LLM and sent by Chris Mason in private. [ david: use new helpers consistently; simplify description and comments; move_ptes() fixup ] | ||||
| CVE-2026-99653 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-20 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mm: fix unkillable fault loop on MAP_DROPPABLE memory handle_mm_fault() suppresses VM_FAULT_OOM for VM_DROPPABLE mappings. For user-mode faults, pending signals are processed before retrying the access. Kernel-mode faults on user buffers instead return directly to the faulting instruction. With persistent allocation failures (esp. memcg limits), a syscall, such as write(), can therefore loop while not dropping locks. Only suppress VM_FAULT_OOM when FAULT_FLAG_USER is set, allowing kernel-mode faults and GUP to fail and signal allocation errors. Fix generated by an LLM and sent by Chris Mason in private. [ david: simplify description ] | ||||
| CVE-2026-133652 | 1 Flowintel | 1 Flowintel | 2026-11-20 | N/A |
| Flowintel , contained a session management vulnerability in its browser authentication mechanism. The session identifier used a bare numeric user ID rather than a credential-bound token, resulting in several related weaknesses: - Remembered logins (remember-me cookies) remained valid after a user changed their password, allowing an attacker holding a previously issued cookie to retain access indefinitely. - Server-side session identifiers were not rotated upon login (local, SSO, or remembered), enabling session fixation. - Self-service email and password changes did not require verification of the current password, permitting an attacker with an active session to modify account credentials without knowledge of the existing password. - Administrator-initiated password resets did not revoke other browser sessions, invalidate remembered logins, or rotate the affected user's API key. An attacker who obtained a valid session or remember-me cookie (e.g., through XSS, network interception, or cookie theft) could maintain unauthorized access even after the legitimate user changed their password. Additionally, an attacker with any valid session could change the account's email address or password without knowing the current credentials, effectively taking over the account. Affected versions: Flowintel prior to 4.1.0. | ||||
| CVE-2026-133651 | 1 Flowintel | 1 Flowintel | 2026-11-20 | N/A |
| FlowIntel contained a Cross-Site Request Forgery (CSRF) vulnerability affecting fourteen web routes that performed destructive or state-changing operations. The affected routes accepted HTTP GET requests in addition to (or instead of) POST, which bypassed the Flask-WTF CSRF token validation that is only enforced on non-GET requests. The vulnerable operations included: - Case deletion and case merging - Organisation removal from a case - Task deletion (case and template) - Case template and note template deletion - Connector, connector instance, and icon deletion - Custom tag deletion and status change - Taxonomy and galaxy status changes An attacker who could induce an authenticated user to follow a crafted link or load a page containing a cross-site navigation (e.g., an image tag or redirect) could trigger any of these destructive actions using the victim's session cookie, without the victim's explicit consent or awareness. No special privileges beyond a valid authenticated session with the appropriate role (editor or admin) were required on the victim's account. Security impact: unauthorized deletion or modification of cases, tasks, templates, connectors, icons, custom tags, taxonomies, and galaxies belonging to the victim or the organisation, resulting in loss of data integrity. Affected versions: FlowIntel prior to 4.1.0 | ||||
| CVE-2026-133648 | 1 Flowintel | 1 Flowintel | 2026-11-20 | N/A |
| Flowintel disabled TLS certificate verification for all MISP API connections and used unverified SSL contexts for IMAP and SMTP STARTTLS mail connections. This allowed an on-path (man-in-the-middle) attacker positioned between Flowintel and its MISP or mail servers to impersonate the remote server and intercept sensitive data. Affected connections include: - All MISP HTTPS API calls (event retrieval, attribute search, event creation, connectivity checks, and API validation) - SMTP STARTTLS connections used for sending email notifications - IMAP TLS connections used for fetching mail archives and testing connectivity An attacker who can observe or intercept network traffic between Flowintel and the MISP or mail server could: - Capture MISP API keys and mail credentials (SMTP/IMAP passwords) - Read all threat intelligence data exchanged (events, attributes, objects, reports) - Inject or modify threat intelligence data returned to Flowintel The vulnerability required no authentication on the part of the attacker and no user interaction; it was exploitable by any party with a network position between Flowintel and its configured MISP or mail endpoints. Affected versions: Flowintel prior to 4.1.0. | ||||
| CVE-2026-124330 | 1 Flowci | 1 Flow-core-x | 2026-11-20 | 5 Medium |
| A vulnerability was determined in FlowCI flow-core-x up to 1.23.49. This affects the function exist/save/read/remove of the file store/src/main/java/com/flowci/store/LocalFileManager.java of the component LocalFileManager. This manipulation of the argument fileName causes path traversal. It is possible to initiate the attack remotely. A high degree of complexity is needed for the attack. The exploitability is reported as difficult. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure but did not respond in any way. | ||||
| CVE-2026-124329 | 1 Flowci | 1 Flow-core-x | 2026-11-20 | 5 Medium |
| A vulnerability was found in FlowCI flow-core-x up to 1.23.49. The impacted element is the function FileHelper.unzip of the file common/src/main/java/com/flowci/common/helper/FileHelper.java. The manipulation results in path traversal. The attack may be performed from remote. A high complexity level is associated with this attack. The exploitability is regarded as difficult. The exploit has been made public and could be used. The vendor was contacted early about this disclosure but did not respond in any way. | ||||
| CVE-2026-124328 | 1 Flowci | 1 Flow-core-x | 2026-11-20 | 7.4 High |
| A vulnerability has been found in FlowCI flow-core-x up to 1.23.49. The affected element is the function ConditionManagerImpl.run of the file core/src/main/java/com/flowci/core/common/manager/ConditionManagerImpl.java of the component Groovy Script Evaluation. The manipulation of the argument condition leads to code injection. The attack is possible to be carried out remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. | ||||
| CVE-2026-124768 | 1 Xone | 1 Xonemanager | 2026-11-20 | N/A |
| Authorization bypass via a user-controlled key in XOneManager 3.8.3.0. The 'ConvertBDToProject' operation selects the database based on 'databasename' without verifying the user’s permissions on it. An authenticated user can link a project to a database outside their scope and identify existing databases based on API responses. | ||||
| CVE-2026-99582 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-20 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: sctp: re-point retained control chunks on association migration sctp_sock_migrate() transfers DATA chunk ownership but leaves retained control chunks pointing at the old socket. A later retransmission can therefore access the socket after it has been freed. Extend the migration walk to cover retained control chunks and use sctp_control_set_owner_w() to assign their new owner. Reuse the DATA ownership check so each chunk is processed once per pass, even when it is reachable through multiple lists or retained pointers. Preserve a control chunk's existing authentication key across migration so its final release can still generate SCTP_AUTH_FREE_KEY when needed. | ||||
| CVE-2026-99583 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-20 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: sctp: hold shkey across socket migration sctp_sock_migrate() transfers queued DATA skbs from the old socket to the new one. skb_orphan() invokes sctp_wfree() during that transfer and drops the skb-owned shared-key reference. If userspace has removed that key from the association, this can be the final reference. The following sctp_set_owner_w() then dereferences the freed chunk->shkey while trying to take the new owner reference. Take a temporary shared-key reference before orphaning the skb and release it after the new owner has taken its reference. This preserves the selected authentication key throughout the ownership transfer. Bug found and triaged by OpenAI Security Research and validated by Trail of Bits. | ||||
| CVE-2026-99584 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-20 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to avoid folio->mapping dereference in is_{meta, node}_folio() Otherwise, it may cause NULL pointer dereference in race condition: Thread A Thread B - f2fs_setattr - f2fs_truncate - f2fs_truncate_blocks - f2fs_do_truncate_blocks - f2fs_truncate_inode_blocks - truncate_dnode - truncate_node - invalidate_mapping_pages - folio->mapping = NULL - folio_lock - is_node_folio - F2FS_F_SB(folio): dereference on folio->mapping | ||||
| CVE-2026-99585 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-20 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: Use kvm_s2_fault_vma_info in gmem_abort() gmem_abort() maps at s2fd->fault_ipa, which HPFAR_EL2 holds at 4K granularity whatever the page size. The generic page-table code aligns it, but pkvm_pgtable_stage2_map() looks up existing mappings over [addr, addr + size), so on a pKVM host with pages larger than 4K a guest_memfd-backed guest that faults past the first 4K of a page can find its neighbour's mapping, get -EAGAIN and take the same fault forever. The memory fault exit reports s2fd->fault_ipa too, which for a nested guest's fault is the nested IPA rather than the canonical one kvm_gmem_get_pfn() failed on. Take the addresses from kvm_s2_fault_vma_info instead, as user_mem_abort() does, and report the canonical gfn in the memory fault exit. kvm_s2_fault_get_vma_info() itself isn't called: a guest_memfd memslot's userspace_addr doesn't need to be backed by a VMA. | ||||
| CVE-2026-99586 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-20 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: iommu/arm-smmu-v3: Handle ARM erratum for CONT under invalidation with SVA The erratum (MMU-700: #3777127, S3: #3673557) deals with under invalidation of a CONT PTE grouping in the SMMU. The recommended work around is to use a range invalidation that spans the entire CONT. The only user of CONT in the kernel right now is through SVA sharing a CPU page table that contains a CONT created by the mm. Previously it was thought that this errata was dealt with because the driver always uses range invalidation. However, there is a subtle detail in the errata that the invalidation range must fully enclose the entire CONT for it to work. It seems that two sequential range invalidations, with a split point falling inside a CONT grouping, will not prevent the errata. The SMMU's range invalidation generation algorithm does not produce a single invalidation for a single SVA invalidation request, nor does the mm carefully align the SVA invalidation ranges to accommodate the splitting of the invalidation into several ranges. Thus, when processing a SVA invalidation, the range invalidation splitting routine can generate a range invalidation that is split in the middle of the CONT and risk under invalidation from this errata. This condition could be triggered by a malicious userspace manipulating the TLB gathers via mmap/mprotect/munmap. Update the errata list to the include the S3 variation, detect the IOMMUs that have it, and then have SVA invalidations use a simplified version of the over invalidation algorithm from the tlbi rework series. This ensures that a single range invalidation is issued for a single MMU notifier callback and now the range invalidation is guarenteed to cover any posible CONT. Future work to add CONT to iommu_domain page tables should either use this one-invalidate/one-range invalidation algorithm or disable CONT support in the iommu_domain. | ||||
| CVE-2026-99587 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-20 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ata: libata-scsi: reject data-in commands with a data-out buffer SG_IO can submit a data-in SCSI command with DMA_TO_DEVICE. The scatterlist can then contain pages pinned without write access. ata_scsi_rbuf_fill() writes simulated replies to that scatterlist; in the reported case, the copy tried to write the shared zero page and faulted in the kernel. The same mismatch can affect SG_IO commands translated by libata. ZBC IN and GET PHYSICAL ELEMENT STATUS completion handlers can modify the receive buffer even if the drive aborts the command. For ATAPI, the successful INQUIRY completion also rewrites the buffer in atapi_fixup_inquiry(). Reject these mismatched commands before the buffer is written or the command is issued. Report ABORTED COMMAND / DATA IN BUFFER ERROR because the CDB itself can be valid; the supplied transfer direction is wrong. | ||||
| CVE-2026-99588 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-20 | 4.3 Medium |
| In the Linux kernel, the following vulnerability has been resolved: batman-adv: tt: only update flags for TT events In the first implementation of the translation table events, it was only possible to announce: * ADD: new locally detected client * DEL: disappeared local client If an ADD event was queued and then a DEL event was queued in the same timeslot, it is valid to destroy both events because nothing actually changed for remode nodes But with commit 3c4f7ab60cc2 ("batman-adv: improve the TT component to support runtime flag changes") and subsequent changes, it could also happen that there are extra ADD events: * ADD: _NEW_ locally detected client * ADD: already existing client with new flags * DEL: disappeared local client The first and the last type of event could in theory still be removed together from the (to be announced) events queue. But if the "update flags" ADD is dropped together with the DEL, it would still leave global translation table of a remote node in the incorrect state - believing that the client didn't disappear. If a detected client was previously announced, a DEL event must only overwrite the "update flags" ADD but the DEL itself must still continue to exist in the (to be anounced) events queue. For now, adjustment of the announced flags is used for everything instead of dropping already queued up events completely. Similarly, a DEL followed by an ADD caused both entries to be deleted. But the new ADD could announce flags changes which were not yet present for the client before it was marked for DELetion. The new ADD must therefore only overwrite the DEL - but still be kept. | ||||
| CVE-2026-99589 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-20 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: batman-adv: tt: clear ROAM flag when re-adding a pending local client When a ROAMING_ADV is received for an announced local client, batadv_tt_local_mark_removed() sets BATADV_TT_CLIENT_ROAM, queues a DEL|ROAM change and marks the entry as BATADV_TT_CLIENT_PENDING. If the client sends a frame again before the next TTVN commit, batadv_tt_local_add_existing() only clears the PENDING flag and returns early. The ADD cancels the queued DEL, but the entry keeps the ROAM flag: * batadv_is_my_client() reports the client as not served by this node * batadv_tt_local_client_is_roaming() reroutes unicast frames for it to the node which sent the ROAMING_ADV The ROAM flag is only removed with the next frame of the client. Since BATADV_TT_CLIENT_ROAM is set together with BATADV_TT_CLIENT_PENDING, it has to be cleared also at the same time with BATADV_TT_CLIENT_PENDING when the client roamed back. | ||||